Need help?

760-241-3665Thursday Hours: 10:00am-4:00pm
Please call to make sure we haven't gone out on an appointment!

Natural Stone Floors: Travertine Tile

Travertine tile is considered suitable for a variety of architectural styles and is recognized for its timeless beauty. Travertine, a warm honey-colored natural stone quarried for thousands of years, continues to be chosen by some of the world's best-known architects and designers. Because travertine is abundant, weighs less than marble or granite, and is comparatively easy to quarry, it was the natural stone most frequently used by the ancient Romans. Famous structures constructed with travertine tile include the Colosseum, the Trevi Fountain, the colonnade of Saint Peter's Basilica, and many Roman aqueducts. Although obviously weathered by time, the fact that it is still in place attests to travertine tile’s great resistance and strength.

Travertine is found in greatest quantity where hot and cold springs have been active for tens of thousands of years. Travertine is quarried in Italy, Iraq, Iran and Peru. The most famous travertine location is Bagni di Tivoli, about 12 miles east of Rome, where travertine deposits over 90 meters thick have been quarried for over two thousand years.

Travertine is a limestone formed from the precipitation of heated aquifer waters and mineral springs when it rises to the surface. A thick, banded carbonate stone is built up over time as new dissolved limestone material covers older layers. The intricate texture of travertine is partially the result of gas bubbles, which are often sandwiched between layers of stone, creating voids. When travertine tile is to be used on the floor, these voids should be filled with an epoxy resin. Some installers use a grout to fill these holes but travertine tile can be purchased with the voids already filled with resin at the factory. As travertine is creamy colored, this resin may be opaque, of a creamy color, or transparent. The opaque filler does not reflect the light as well as the surrounding travertine, whereas the clear epoxy gives a three-dimensional appearance to the holes and takes on the shine of the travertine tile.

Travertine tile possess a wide range of colors, and cover the spectrum from pure white to coral-red. The various hues of travertine tile can sometimes be constant throughout large pieces and at times are blended. Travertine tile displays distinct veins at times. It can be effectively polished to a smooth, shiny finish.

Travertine is quarried from the ground in huge blocks before it is cut into tile. It may be cut in any of the following ways:

  • Cross-cut – The travertine is cut with the grain of the stone bedding. This insures a more uniform color and texture often revealing a flowery, often circular pattern.
  • Vein cut – which is against the bedding which reveals the bedding planes, making for a more blotchy, tiger-stripe effect when cut into tiles.

After the travertine is quarried, it is stringently selected for color variances, and further assessed after it is cut for voids and chipped edges. Beyond the selection process, the travertine may be subject to any of the following processes:

  • Honed – the surface of the travertine tile is sanded to create a matte finish.
  • Tumbled – the travertine is literally tumbled with gravel and bearings, giving it a rough-hewn, aged appearance.
  • Brushed –the surface of the travertine tile is worn and textured by use of a wire brush.
  • Filled – The voids in the travertine tile are filled with colored epoxy resin or cement to produce a perfect, solid surface.
  • Polished – the travertine is sanded and polished, producing a shimmering look.

A travertine tile floor is expected to last at least 50 years before replacement in high-traffic commercial areas. High-quality travertine is very durable, since it is formed at the earth's surface in relative equilibrium with the environment. Most other natural stones are formed under different conditions, deep underground.



Select Another Product

Brand Overview


Arizona Tile Natural Stone  | Victorville, CA
Visit us on Pinterest Visit us on Facebook Visit us on Twitter Visit us on Houzz Visit us on YouTube Visit us on Google + 
Click here to view brand

Arizona Tile Natural Stone  


Profile | Website

Since we have been in the stone and tile business for over 30 years, we frequently are approached by quarries and factories to review new product options. We also continuously travel the world to find new product colors and ideas to offer our customers. 

Emser Natural Stone | Victorville, CA
Visit us on Pinterest Visit us on Twitter Visit us on Facebook 
Click here to view brand

Emser Natural Stone 


Profile | Website

Emser has become a leading marketer of the world’s finest natural stone. By offering unparalleled service and a dynamic selection of products, Emser is one of the most comprehensive sources for interior and exterior products quarry and cut-to-size stone.