Atlas Castlebrook Shingles and Other Atlas Designer Lines

Homeowners searching for Atlas roofing often run into a confusing mix of names: Castlebrook, Chalet, Hearthstone, Majestic Shake, StormMaster, Pinnacle. Some are product lines, some are colors, and at least one is an older name you will not find on a current price sheet. Atlas Castlebrook shingles are a current Atlas Roofing product line, marketed as a designer-style shingle with a thicker, dimensional look, and the Atlas website lists it in seven colors, with availability set by local Atlas distributors.

Part of our Roofing guide — explore the full guide →

The short version: Castlebrook is a real, current line aimed at homeowners who want more texture than a basic architectural shingle at a moderate price. Hearthstone and Majestic Shake are color names used on other Atlas lines, not separate shingles. Chalet does not appear among the current Atlas shingle lines, so treat it as an older or discontinued name. StormMaster Shake is the line Atlas itself calls its premium designer shingle.

Atlas Castlebrook Shingles and Related Names: What Is Current

This table sorts the names people search into what they actually are, based on the current Atlas shingle lineup page. “Current” means the name appears on Atlas’s own product listing at the time of writing.

If a contractor quotes “Atlas Hearthstone shingles,” ask which product line they mean. Hearthstone on Castlebrook and Hearthstone on Pinnacle Pristine are different shingles with different profiles and warranty terms, even though the color name matches.

Castlebrook in Detail

Atlas lists Castlebrook in these seven colors: Black Shadow, Burnt Sienna, Desert Shake, Dove Gray, Hearthstone, Pewter and Weathered Wood. That is a narrower palette than Pinnacle Pristine, but it covers the common choices: a near-black, a couple of grays, a warm brown, a reddish brown and a blended wood tone.

Atlas brochures for Castlebrook describe a lifetime limited shingle warranty and a wind limited warranty of up to 130 mph, along with a Class A fire rating under UL 790. Atlas’s limited warranty document has tied the higher wind coverage to an enhanced installation: six nails per shingle and the company’s starter shingles along the eaves. A standard four-nail installation has carried a lower wind rating (110 mph in the version of the warranty that was checked). Warranty terms, proration and algae coverage change between warranty editions, so read the current Atlas limited warranty for your install date rather than relying on a brochure.

Visually, Castlebrook is meant to look heavier and more dimensional than a standard laminated shingle. If you want the deep shadow lines of a shake-style roof without stepping up to the premium tier, it is the Atlas line built for that brief.

How Castlebrook Compares With Other Atlas Lines

StormMaster Shake

This is Atlas’s top-tier designer shingle, and the company says so in its own naming. It has a larger color list than Castlebrook, including Moonlight Beach, Midnight Lake, Grand Teton, Aspen Grove, Black Shadow, Pewter, Chestnut, Weathered Wood, Copper Canyon and Morning Harvest. Expect it to cost more than Castlebrook and to be sold mainly through roofing distributors and contractors. Check its current spec sheet for impact and wind ratings, which are a major selling point for this tier.

Pinnacle Pristine

Pinnacle Pristine is the mainstream architectural line, with the widest color selection: Midnight Lake, Chestnut, Rustic Highland, Black Shadow, Coastal Granite, Hearthstone, Pewter, Copper Canyon, Summer Storm, Oyster Shell, Heatherblend, Burnt Hickory, Majestic Shake, Weathered Wood, Weathered Shadow, Morning Harvest, Tan Mist, Woodland Green and Sunset. If you searched for “Atlas Majestic Shake,” this is the line you were looking at.

Pinnacle Impact

Built for hail-prone areas, Pinnacle Impact comes in impact-resistant versions of colors such as Rustic Highland, Morning Harvest, Hearthstone, Pewter, Black Shadow and Weathered Wood. Impact-rated shingles can lower insurance premiums in some states, so ask your insurer before choosing.

Choosing among them

• Pick Castlebrook for a dimensional, designer-style look at a moderate price with a limited color set.
• Pick Pinnacle Pristine for the broadest color choice in a standard architectural profile.
• Pick Pinnacle Impact if hail is a real concern where you live.
• Pick StormMaster Shake if you want the premium designer profile and are willing to pay for it.

Tools and Materials for an Asphalt Shingle Roof

• Shingles, ordered by the square (one square covers 100 sq ft), plus 10 to 15 percent for waste on simple roofs and more for complex ones
• Starter shingles for eaves and rakes, and matching hip and ridge caps
• Synthetic underlayment and ice and water shield for eaves, valleys and penetrations where your climate or code calls for it
• Drip edge, step flashing, pipe boots and ridge vent
• Roofing nails of the length and type the shingle maker specifies
• A roofing nail gun with depth adjustment, or a roofing hammer
• Utility knife with hook blades, chalk line, tape measure
• Fall protection: harness, roof anchor, rope and lanyard, plus roof brackets and planks on steeper pitches

A pneumatic roofing nailer speeds up the job considerably and gives consistent nail depth, but set the depth carefully. Overdriven nails cut through the shingle mat and underdriven nails stop tabs from sealing, and either one can void wind coverage.

Installation Overview

1. Check local rules and the warranty. Many towns require a permit for re-roofing. Read the shingle installation instructions in full, because the warranty depends on following them.
2. Tear off and inspect. Remove old roofing down to the deck, replace any soft or rotted sheathing, and set new drip edge at the eaves.
3. Underlayment. Install ice and water shield where required, then synthetic underlayment over the rest of the deck, lapped as specified.
4. Starter course. Run starter shingles along the eaves and rakes so the first course seals and resists wind lift.
5. Shingle courses. Follow the maker’s offset pattern and exposure. Use the nail count and nailing zone the instructions require, especially if you want the higher wind coverage.
6. Flashing. Weave step flashing at walls and chimneys and seal around vents and pipes.
7. Ridge and vents. Install ridge vent where specified, then cap with matching hip and ridge shingles.
8. Clean up. Run a magnet sweeper over the yard and driveway to collect loose nails.

Ladder and Roof Safety

Falls from roofs and ladders are among the most serious home-improvement injuries. Set an extension ladder on firm, level ground at about a 1-to-4 angle (one foot out for every four feet of height), extend it at least 3 feet past the roof edge, and tie it off at the top. Keep three points of contact while climbing, and never carry bundles up a ladder by hand; use a hoist or have them delivered to the roof. Wear a harness tied to a properly installed roof anchor, use roof brackets on any pitch you cannot walk comfortably, and stay off wet, icy or windy roofs. For two-story homes, steep pitches or any roof that makes you nervous, hire a licensed and insured roofing contractor.

Troubleshooting Common Problems

Shingles lifting in wind

Usually a sealing or nailing issue: shingles installed in cold weather that never sealed, missing starter course, or nails outside the nailing zone. A roofer can hand-seal tabs with roofing cement.

Dark streaks

Black streaks are typically algae. Many Atlas lines include algae-resistant technology, but coverage varies by line and warranty edition. Gentle cleaning with a roof-safe cleaner can help; never pressure wash shingles.

Color mismatch on repairs

Shingle colors shift slightly between production runs and fade with age. Keep a bundle from the original job for future repairs.

Cost Ranges

Installed asphalt shingle roofs commonly fall between about 4 and 8 dollars per square foot in many US markets, and designer or premium lines push toward the upper end or beyond. A typical 2,000 sq ft roof may run roughly 10,000 to 20,000 dollars, depending on tear-off, deck repairs, pitch, access and region. Castlebrook is generally priced between basic architectural shingles and premium designer lines. Material for a DIY shed or garage roof is far less, but labor and disposal make up a large share of a full house roof.

When to Call a Pro

For most houses, roofing is a job for a licensed, insured contractor, ideally one certified by the shingle maker, since certain enhanced warranties require it. Call a pro for any two-story home, steep pitch, extensive deck rot, chimney or skylight flashing, or if permits and inspections apply in your area. Ask for the specific product line and color in writing so there is no confusion between similarly named Atlas products.