A brick driveway is one of the most durable and good-looking paving options you can install, but it is also one of the most expensive per square foot. Expect a typical brick driveway cost of about $15 to $30 per square foot installed for clay brick pavers rated for vehicles, with simple layouts on easy sites at the low end and intricate patterns, poor soil or long tear-outs at the high end. For a standard two-car driveway of around 400 square feet, that works out to roughly $6,000 to $12,000.
Most of that money goes into what you never see: excavation and a thick, compacted gravel base that keeps bricks from rutting under car tires. A patio can get away with a shallow base. A driveway cannot, which is why driveway pricing runs higher than patio pricing for the same brick.
- Brick Driveway Cost by Size
- Cost per Square Foot Breakdown
- What Drives Brick Driveway Cost Up or Down
- Clay Brick vs Concrete Pavers for Driveways
- Installation Steps at a Glance
- Maintenance and Long-Term Costs
- Troubleshooting Common Brick Driveway Problems
- When to Hire a Pro
- Frequently Asked Questions
- How much does a brick driveway cost per square foot?
- How much is a brick driveway for a two-car garage?
- Is a brick driveway more expensive than concrete pavers?
- Why does a brick driveway cost more than a brick patio?
- What is the best pattern for a brick driveway?
- How long does a brick driveway last?
Brick Driveway Cost by Size
The figures assume new installation of vehicle-rated clay brick pavers on a properly excavated and compacted aggregate base, with edge restraints and joint sand. Removal of an old driveway is extra unless noted.
| Driveway size | Area | Typical installed range | Notes |
|---|---|---|---|
| Single car, short (10 x 20 ft) | 200 sq ft | $3,000 to $6,000 | Minimum charges can push small jobs higher per sq ft |
| Single car, standard (12 x 24 ft) | 288 sq ft | $4,300 to $8,600 | Common for townhomes and narrow lots |
| Two car, short (20 x 20 ft) | 400 sq ft | $6,000 to $12,000 | Most common suburban size |
| Two car, standard (24 x 24 ft) | 576 sq ft | $8,600 to $17,300 | Room to open doors on both sides |
| Long single lane (10 x 50 ft) | 500 sq ft | $7,500 to $15,000 | Edging length adds cost on long runs |
| Two car, long (20 x 40 ft) | 800 sq ft | $12,000 to $24,000 | Bulk material pricing may help |
| Three car (30 x 30 ft) | 900 sq ft | $13,500 to $27,000 | Often needs added drainage planning |
These are general ranges, not quotes. Regional labor rates, brick choice and site conditions can move your number well outside them. To estimate your own driveway, multiply length by width for the square footage, then multiply by $15 for a basic job and $30 for a complex one.
Cost per Square Foot Breakdown
Breaking the per-square-foot price into parts makes contractor quotes easier to compare. Exact splits vary, but most quotes break down roughly like this:
- Brick pavers: often about a quarter to a third of the total. Clay pavers rated for vehicular traffic cost more than standard clay pavers or thin “patio” bricks.
- Excavation and hauling: digging out soil to the required depth and removing it from site. Tight access and clay soils raise this line.
- Base materials: crushed aggregate base plus a bedding layer of coarse sand. Driveways typically need a base several inches deeper than patios.
- Labor: compaction, screeding, laying, cutting, edging and joint sanding. Labor is often half or more of the total.
- Edge restraints: concrete curbs, a soldier course set in concrete, or heavy-duty plastic or metal edging.
- Extras: old driveway removal, drainage, permits, sealing and design work.
What Drives Brick Driveway Cost Up or Down
Base depth and soil
Vehicle loads need a thicker, well-compacted aggregate base than a patio. Clay soils, high water tables or soft spots may require deeper excavation, geotextile fabric or extra base material. This is the single biggest hidden cost, and skimping here is the main reason brick driveways sink or rut.
Installation method
Most residential brick driveways are set in sand over a gravel base (a flexible system). Mortared brick on a concrete slab is a rigid system that costs considerably more because you pay for the slab as well as the brick and mortar work, and it can crack if the slab moves.
Laying pattern
- Running bond and stack bond: simplest and cheapest, but not ideal for driveways because joints run in one direction.
- Basketweave: moderate labor, classic look, moderate interlock.
- Herringbone (45 or 90 degree): the preferred driveway pattern because it locks pavers together against turning tires. More cuts at the edges mean more labor and more waste.
- Circles, fans and borders: the most labor-intensive, often adding significantly to the per-square-foot price.
Edging and borders
A soldier course (bricks set on end or long side along the edge) bedded in concrete is a common driveway border. It costs more than plastic edging but holds up far better to tire pressure at the edges.
Site access and tear-out
Removing an existing asphalt or concrete driveway adds demolition and disposal cost, often a few dollars per square foot. Steep slopes, tight access and long haul distances raise labor time.
Brick type
New vehicle-rated clay pavers are the standard. Reclaimed or antique street brick has character but varies in size and thickness, which makes laying slower and pricier. Thin decorative brick meant for walls or patios is not suitable for vehicle traffic.
Clay Brick vs Concrete Pavers for Driveways
Many quotes include both options, so it helps to know the trade-offs.
- Cost: concrete pavers usually run a bit less installed, often in the $12 to $25 per square foot range, because the units are cheaper and come in larger, more uniform shapes.
- Color: clay brick color is fired through and holds up for decades. Concrete pavers use pigments that can fade over time, especially in strong sun.
- Strength: both can carry cars when made and installed for vehicular use. Check that either product is rated for driveways.
- Shapes and sizes: concrete pavers come in many shapes, textures and larger formats. Clay brick is mostly rectangular.
- Maintenance: both need occasional joint sand top-ups and weed control. Clay is less porous and resists staining somewhat better.
Compared with poured concrete or asphalt, any paver driveway costs more up front, often two to three times as much. The trade-off is repairability: a cracked or sunken section can be lifted and relaid instead of cut out and patched.
Installation Steps at a Glance
Knowing the sequence helps you check that a quote covers every stage.
- Call 811 before digging so buried utilities are marked, and check whether your town requires a permit or has curb-cut and drainage rules.
- Excavate to the depth needed for base, bedding sand and brick, and grade for drainage away from the house, typically a slight slope of about 1/4 inch per foot.
- Compact the subgrade, then add geotextile fabric if the soil is soft or clay-heavy.
- Install aggregate base in thin lifts, compacting each with a plate compactor.
- Set edge restraints or a soldier course bedded in concrete.
- Screed bedding sand to an even layer about 1 inch thick.
- Lay the bricks in the chosen pattern, tapping them into place with a rubber mallet so they seat without chipping, and cut edge pieces with a wet saw.
- Compact the field with a plate compactor fitted with a protective pad, then sweep joint sand in and compact again until joints are full.
Cutting brick creates fine silica dust. Wet cutting, an N95 or better respirator and eye and hearing protection are standard practice for anyone cutting pavers.
Maintenance and Long-Term Costs
A properly built brick driveway can last for decades. Budget for occasional joint sand top-ups, weed control and spot cleaning of oil stains. Some owners apply a penetrating sealer every few years to reduce staining; check the brick maker’s guidance first, because some clay pavers do not need sealing. Repairs are usually cheap compared with replacing a slab: lift the affected bricks, fix the base, and relay them.
Troubleshooting Common Brick Driveway Problems
- Ruts in wheel paths: base too thin or poorly compacted. Lift bricks, rebuild the base, and relay.
- Bricks shifting at edges: weak or missing edge restraint. Install a concrete-bedded border.
- Weeds and ants in joints: joints not fully filled. Top up joint sand, consider polymeric sand, and compact.
- Standing water: grading or drainage problem. Regrade or add a channel drain.
- Efflorescence (white haze): salts carried by moisture. It usually fades on its own or with a cleaner made for masonry.
When to Hire a Pro
A brick patio can be a reasonable DIY project; a driveway is a different scale. The excavation volume, base compaction, equipment rental and weight of material make professional installation the practical choice for most homeowners. Get at least three written quotes that specify base depth, base material, edge restraint type, pattern, brick product and whether tear-out and haul-away are included. A low quote that skips base depth details is a red flag.
Frequently Asked Questions
How much does a brick driveway cost per square foot?
Most vehicle-rated clay brick driveways run about $15 to $30 per square foot installed. Complex patterns, poor soil and tear-out of an old driveway push costs toward the high end or beyond.
How much is a brick driveway for a two-car garage?
A 20 by 20 foot two-car driveway of 400 square feet typically costs about $6,000 to $12,000. A roomier 24 by 24 foot driveway runs roughly $8,600 to $17,300.
Is a brick driveway more expensive than concrete pavers?
Usually yes, somewhat. Concrete pavers often cost about $12 to $25 per square foot installed, while clay brick runs higher. Clay brick holds its color longer.
Why does a brick driveway cost more than a brick patio?
Driveways need deeper excavation, a thicker compacted base, vehicle-rated pavers and stronger edge restraints to handle car weight. Those items add material and labor.
What is the best pattern for a brick driveway?
Herringbone, at 45 or 90 degrees, is the preferred driveway pattern because it interlocks bricks and resists shifting from turning tires.
How long does a brick driveway last?
With a well-built base and basic maintenance, a clay brick driveway can last for decades. Individual bricks can be lifted and relaid if a section settles.