Most homeowners pick brick paver colors from a single sample in a showroom, then find that the finished patio looks nothing like the brick on the house. The fix is simple: choose a blend, not a single color, and judge it against your siding, roof, and trim in daylight. Red, brown, charcoal, and tan blends cover nearly every style of home, and each behaves differently in clay and concrete.
Material matters as much as color. Clay pavers get their color from the clay and the firing process, so the shade runs all the way through and holds for decades. Concrete pavers are colored with pigments added to the mix or the face layer, which gives you a wider palette but more fading over time. Knowing that difference helps you choose a shade that still looks right in 15 years.
The quick rule: match the undertone of your house (warm red-orange brick, cool gray stone, or neutral siding), then choose a blend one or two steps darker or lighter than the house itself so the hardscape frames the home rather than disappearing into it.
Popular Brick Paver Colors Compared
The table groups the most common brick paver colors by blend, with notes on how each looks in clay versus concrete and what house exteriors they suit.
| Color blend | Clay pavers | Concrete pavers | Best matched with |
|---|---|---|---|
| Classic red | Deep, true red; holds color for decades | Brighter red; may fade toward pink-orange in full sun | Red brick homes, white siding, colonial styles |
| Red-charcoal blend | Red with dark flashed edges; traditional look | Red and gray mix; widely available | Red or brown brick, dark roofs |
| Brown and chocolate | Rich brown with natural variation | Uniform brown; softens as it weathers | Tan or brown brick, earth-tone siding, wood accents |
| Tan and buff | Warm sand and wheat tones | Light tan to beige; shows dirt sooner | Cream or yellow brick, stucco, beige siding |
| Charcoal and gray | Less common; dark ironspot tones | Very common; clean modern look | Gray, white, or black siding; modern farmhouse |
| Multi-color (autumn) blend | Mixed red, brown, and tan | Mixed red, tan, and charcoal | Homes with mixed materials or stone accents |
| Antique or tumbled | Reclaimed look with softened edges | Tumbled faces mimic old brick | Older homes, cottage and Tudor styles |
Brown brick pavers are among the safest choices for mixed-material homes. They pair with red brick, tan stucco, and natural wood without clashing, and they hide dirt and leaf stains better than tan or light gray.
Clay vs Concrete: How Color Holds Up
Clay pavers are fired in a kiln, and the minerals in the clay set the final shade. Iron produces reds, other minerals and firing temperatures give browns and darker flashed tones. Because the color is part of the material, a chipped clay paver shows the same color underneath, and UV exposure barely changes it. Clay usually costs more and comes in a smaller color range, but it ages gracefully.
Concrete pavers rely on iron-oxide pigments. Some are colored through the whole body, while others have a colored face layer over a gray core. Over several years, the cement paste on the surface wears and exposes more aggregate, which makes most concrete pavers look lighter and less saturated. Red concrete pavers are the most noticeable for this, often shifting toward a dusty orange. A sealer slows the change and can enrich the color, but it does not stop it entirely.
- Choose clay when you want a traditional red or brown that matches house brick permanently.
- Choose concrete when you want gray, charcoal, or a specific modern blend at a lower cost.
- Expect fading with concrete: pick a shade slightly deeper than you want long-term.
How to Match Pavers to Your House
The goal is harmony, not an exact match. Pavers that duplicate the house brick perfectly tend to make the patio blend into the foundation. A shade that shares the undertone but differs in depth looks deliberate.
Step-by-step color matching
- Identify the main undertone. Look at the house brick, siding, and roof together. Is the overall feel warm (red, orange, tan), cool (gray, blue, black), or neutral?
- Note the roof color. The roof is the largest dark area on most homes. Charcoal pavers echo a dark roof; brown pavers echo a brown roof.
- Pick a blend that contains a house color. A red-charcoal blend next to a red brick house with a black roof ties both together.
- Shift the depth. Go one or two steps darker than light siding, or one step lighter than very dark brick.
- Get full-size samples. Lay at least 6 to 10 pavers on the ground where the patio will go, ideally wet and dry, since many pavers darken noticeably when wet.
- Check at different times. Look in morning shade and afternoon sun. Reds and browns swing more than grays.
Quick matching guide
- Red brick house: red-charcoal blend, chocolate brown, or tumbled antique red.
- White or light gray siding: charcoal, gray blend, or classic red for contrast.
- Tan stucco or beige siding: tan, buff, or a brown-tan blend.
- Dark or black siding: light gray or tan to keep the hardscape from looking heavy.
- Stone accents: a multi-color blend that picks up two or three stone tones.
Patterns and Borders Change How Color Reads
Laying pattern affects color perception more than people expect. Herringbone and basketweave patterns break up the surface, so a multi-color blend looks lively without being busy. Running bond reads calmer and makes a single color look more uniform. A contrasting border, such as a charcoal soldier course around a red field, sharpens the edges and lets you use a bolder main color without overwhelming the yard.
Large areas look lighter than small samples, just as paint does on a wall. If you are paving a large driveway, a blend that looks rich in a sample can look washed out across 600 square feet. Lean a little darker for big areas and a little lighter for small, shaded courtyards that can feel gloomy.
Sealing and Maintaining Color
A paver sealer protects against stains, slows UV fading on concrete, and can deepen color. Sealers come in natural (matte, little change), enhanced (wet look, deeper color), and high-gloss finishes. Clay pavers usually need sealing less often because they are dense, but a sealer still helps with oil and leaf stains on driveways.
- Wait until new concrete pavers have cured and any efflorescence (white haze) has cleared, often 60 to 90 days.
- Clean the surface thoroughly and let it dry for at least 24 hours.
- Test the sealer on a few spare pavers to see how much it darkens the color.
- Apply thin coats with a roller or sprayer, following the label’s coverage rate.
- Reseal every 2 to 5 years depending on traffic and sun exposure.
When cutting pavers for borders and curves, use a wet saw and wear a dust mask rated for fine dust, since dry-cutting concrete and clay releases silica dust. Wear eye and hearing protection as well.
Troubleshooting Color Problems
White haze on new pavers. Efflorescence is mineral salt rising to the surface. It is common on concrete pavers, usually fades on its own within months, and can be treated with an efflorescence cleaner if it persists. Never seal over it.
Patchy color across the patio. Pavers were laid from one pallet at a time. Always pull from three or more pallets at once to mix the natural variation evenly.
Faded red concrete. An enhancing sealer can bring back some depth. For severe fading, replacement or a concrete stain made for pavers is the only real fix.
Replacement pavers don’t match. Colors vary between production runs. Order 5 to 10 percent extra at installation and keep them for future repairs.
Cost by Material and When to Hire a Pro
Concrete pavers typically cost less than clay. Installed, concrete paver patios commonly fall in a moderate per-square-foot range, while clay patios often run noticeably higher because of material cost and harder cutting. Specialty blends and tumbled finishes add a little more. Prices vary widely by region, base preparation, and site access, so get two or three quotes.
A DIY patio is realistic for small, flat areas with good drainage. Hire a hardscape contractor for driveways, slopes, areas over poor soil, or any job near the foundation where drainage needs careful grading. Call 811 before excavating so buried utility lines are marked. A pro also has access to full sample pallets, which makes the final color decision far easier than working from a brochure.
Frequently Asked Questions
What is the most popular brick paver color?
Red and red-charcoal blends remain the most common for traditional homes, while charcoal and gray blends dominate on modern and farmhouse-style exteriors.
Do brick paver colors fade?
Clay pavers hold their color for decades because it runs through the fired material. Concrete pavers usually lighten over several years as the surface wears, especially reds.
Should pavers match my house brick?
They should share the same undertone but not be an exact copy. A blend one or two shades darker or lighter frames the house better than an identical match.
Are brown brick pavers a good choice?
Yes. Brown works with red brick, tan stucco, wood decks, and stone, and it hides dirt and leaf stains better than lighter colors.
Does sealing change paver color?
An enhancing or wet-look sealer deepens the color noticeably. A natural or matte sealer changes it very little. Test on spare pavers first.
How many extra pavers should I buy?
Order 5 to 10 percent extra for cuts and breakage, and store a few for future repairs since later production runs may not match.