A single brick almost never tells you what the finished wall will look like. Acme Brick colors are mostly sold as blends, mixes of several shades fired together, and the texture of the face and the color of the mortar can shift the overall look as much as the brick name does. Acme’s catalog literature has described hundreds of colors and multiple textures across its plants, so picking a color starts with understanding how those pieces work together.
On Acme’s product pages, each brick is identified by a color name, a size and a texture. Examples currently shown include Bordeaux, Highland Gray, Palladium and Bayou City in King size with a Heritage texture, Steele Gray in King size with a Velour texture, Glacier White and Charcoal in Modular size with a Smooth texture, and Redmont and Providence in Queen size with a Heritage texture. Each product page also lists the producing plant, color family and the ASTM classification.
- Acme Brick Colors at a Glance
- How Brick Blends Work
- Textures and Sizes Explained
- Choosing Mortar to Change the Look
- Matching Brick for Additions and Repairs
- Specs to Check Before You Order
- Troubleshooting Color Surprises
- Pairing Acme Brick Colors With the Rest of the Exterior
- Safety and When to Call a Pro
- General Cost Ranges
- Frequently Asked Questions
The practical takeaway: choose a color family first, then a texture, then a mortar, and always look at a full sample panel before ordering.
Acme Brick Colors at a Glance
The table shows how the main choices combine. Example names come from Acme’s own product listings; mortar suggestions are general design guidance, not manufacturer specifications.
| Color direction | Example Acme names | Common texture and size seen | Mortar pairing idea |
|---|---|---|---|
| White and light | Glacier White | Smooth, Modular | White or light buff for a monolithic look; gray for subtle definition |
| Gray | Steele Gray, Paloma Gray, Highland Gray | Velour or Heritage, King and Modular | Light gray to blend; white for crisp contrast |
| Dark | Charcoal | Smooth, Modular | Charcoal for a modern solid face; light gray for graphic contrast |
| Red and burgundy | Bordeaux, Redmont | Heritage, King and Queen | Standard gray for traditional; buff to warm it |
| Mixed or earthy blends | Bayou City, Palladium, Providence | Heritage, King and Queen | Buff or tan to tie warm tones together |
Names, textures and sizes depend on the producing plant, and plants serve different regions. A color available in one state may not ship economically to another, so confirm availability with a local Acme representative.
How Brick Blends Work
A blend is a planned mix of bricks with different shades, fired in a kiln and then combined so the wall reads as one overall color with natural variation. Acme lists blends by number. For example, Steele Gray in King Velour is part of a numbered Steele Gray blend from the producing plant, with a color family of white/gray.
Blends offer two benefits. Variation hides small imperfections and dirt better than a perfectly uniform brick, and the wall gets visual depth from a distance. The trade-off is that a single sample brick can look very different from the full blend. Ask to see a sample panel of at least a few dozen bricks, or visit a house built with that blend.
Mixing bricks during installation matters too. Masons should pull from several pallets at once so the shade variation spreads evenly instead of creating bands or patches across the wall.
Textures and Sizes Explained
Textures you’ll see on Acme listings
- Smooth: a clean, flat face. Reads modern and shows color most uniformly. Light, smooth brick can show dirt and efflorescence more easily.
- Velour: a finely scored or brushed surface that softens light and gives a subtle, matte look.
- Heritage: a more weathered, character-rich face that reads traditional and helps blends look older.
Texture changes perceived color. The same clay fired in a smooth face often looks lighter and brighter than in a rougher face, because shadows in the texture darken the overall impression.
Sizes
- Modular: the common standard size for residential and commercial work.
- Queen: a longer, slimmer unit popular on homes.
- King: a larger unit that covers more wall area per brick. Acme’s architectural literature notes that many blends are made in King size as an economical choice.
Unit size affects the look as well: larger units mean fewer mortar joints per square foot, so the brick color dominates more. Smaller units show more mortar, so the joint color has a larger influence.
Choosing Mortar to Change the Look
Mortar typically covers a noticeable share of a brick wall’s face, so its color carries real weight. Here’s how to choose.
- Decide between blending and contrast. Matching mortar to the brick creates a calm, unified wall. Contrasting mortar outlines each brick and emphasizes pattern.
- Pick the joint profile. Concave and V-joints are common and shed water well. Raked joints create shadow lines and darken the overall look. Ask your mason which profile suits your climate.
- Order a mortar color sample kit. Mortar dries lighter than it looks wet, so test samples next to the actual brick and let them cure fully before deciding.
- Build a sample panel. A small panel with your brick, mortar color and joint profile is the most reliable way to judge the final look.
- Consider the roof and trim. Warm red brick with buff mortar pairs with brown or warm gray roofs; gray brick with light gray mortar suits charcoal or black roofs and white trim.
Matching Brick for Additions and Repairs
Matching existing brick is one of the toughest jobs in masonry. If you are adding onto a house, start with the brick name from the original builder’s paperwork, if you have it. Even with the right name, clay sources and firing conditions change over time, so a new run can look slightly different.
- Bring a whole brick (from a garage wall or leftover pallet) to the supplier for matching.
- Look at the brick dry and wet; some blends shift noticeably when wet.
- Match the mortar color and joint profile as carefully as the brick.
- Place the addition where a natural break, such as a corner or column, separates old and new brick.
Acme’s Masonry Designer tool, mentioned in its catalog material, helps visualize combinations before ordering. Treat on-screen colors as a starting point only, because screens rarely show brick color accurately.
Specs to Check Before You Order
Each Acme product page lists technical details. For Steele Gray King Velour, for example, the page shows an ASTM C652 specification (hollow brick), grade SW (severe weathering) and type HBS. Different bricks carry different specs, so check:
- Grade: SW is suited to severe weathering; important in freeze-thaw climates.
- Specification: solid face brick and hollow brick follow different ASTM specifications.
- Size dimensions: listed in inches on the product page; matters for matching and for layout.
- Plant: tells you where it’s made and hints at regional availability.
Brick is not rated with a light reflectance value the way paint is, so compare lightness by eye using real samples in daylight.
Troubleshooting Color Surprises
White haze on new brick. That’s usually efflorescence, salts carried to the surface by moisture. It often fades with time and weather. Dry brushing helps; use acid cleaners only per the mason’s and manufacturer’s guidance.
Wall looks banded. Pallets weren’t mixed during laying. Future work should draw from several pallets at once.
Mortar looks too dark. Mortar lightens as it cures over several weeks. Judge it once fully dry.
Brick looks different from the showroom. Showroom lighting and small panels distort color. Visit an existing building in daylight before ordering.
Pairing Acme Brick Colors With the Rest of the Exterior
Brick is the one exterior material you’ll almost never change, so choose Acme brick colors with the roof, trim and windows in mind. Gray and white bricks pair naturally with charcoal or black roofs, black window frames and crisp white or soft gray trim. Red and burgundy bricks look classic with white or cream trim and brown, weathered-wood or warm gray roofs. Earthy mixed blends tolerate a wide range of trim colors, but warm whites and muted greens usually look most at home. Limit the exterior to three main colors (brick, trim and an accent) so the house reads calm from the street.
Safety and When to Call a Pro
Cutting brick creates crystalline silica dust. Use wet cutting, wear an N95 or better respirator and eye protection, and clean up with a HEPA vacuum rather than dry sweeping. Structural brick work, tall walls, chimneys and veneer that needs ties into the framing belong to a qualified mason, and many jurisdictions require permits for new masonry walls and additions.
General Cost Ranges
Brick veneer costs vary by region, brick choice and labor. As a broad guide, installed brick veneer commonly runs in a range of roughly $15 to $30 per square foot or more, with specialty sizes, intricate patterns and two-story walls at the high end. Color itself usually matters less than size, texture, shipping distance and labor. Ask for quotes that specify brick name, size, texture, mortar color and joint profile.
Frequently Asked Questions
How many colors does Acme Brick make?
Acme’s catalog material has described hundreds of colors and multiple textures across its plants. The current range changes, so check the manufacturer’s product listings or a local representative.
What is a brick blend?
A blend mixes bricks of several shades so the wall reads as one color with natural variation. Acme lists blends by number and color name.
What textures does Acme offer?
Current product listings show textures including Smooth, Velour and Heritage. Availability depends on the plant and color.
What mortar color looks best with gray brick?
Light gray mortar creates a calm, unified look, while white mortar adds crisp contrast. Test samples next to the brick before deciding.
Can I match my existing Acme brick?
Often, but not always exactly. Bring a whole brick to the supplier, match the mortar color and joint profile too, and plan a natural break between old and new walls.