Cellular PVC siding is one of the few exterior claddings that will not rot, absorb water or feed termites, and you pay for that at the register. AZEK siding cost generally lands in the premium tier of residential siding: as a rough guide, expect something in the range of $10 to $20 per square foot installed for PVC lap siding, with shingle-style and board and batten profiles, complex walls and lots of trim pushing toward the upper end. That is usually more than vinyl and often more than fiber cement, but in the same conversation as cedar.
Those figures are general market ranges, not manufacturer prices. AZEK does not publish retail pricing, the products move through lumberyards and contractors, and regional availability is limited for some lines. The only number that really counts is a written quote from a local installer who has measured your walls.
This page breaks down what drives the price: the profile you choose, trim and accessories, labor, tear-off and the region you live in, followed by a side-by-side comparison with fiber cement and vinyl.
AZEK Siding Cost by Profile and Material
AZEK Exteriors currently markets lap siding, shingle siding and board and batten, alongside its well-known PVC trim line. The lap siding uses a cellular PVC core with a color-infused PVC cap and comes prefinished, so it does not need paint. The shingle and board and batten profiles are paintable products. Check the manufacturer’s current product pages and spec sheets, since lines and color lists change.
| Product or profile | Material and finish | Material cost (general range) | Installed cost (general range) |
|---|---|---|---|
| Lap siding (4.5 in or 7.5 in reveal) | Capped cellular PVC, prefinished color | $6 to $12 per sq ft | $10 to $20 per sq ft |
| Board and batten | Cellular PVC, paintable | $6 to $12 per sq ft | $11 to $20 per sq ft plus paint |
| Shingle siding | Cellular PVC panels, paintable | $8 to $14 per sq ft | $13 to $24 per sq ft plus paint |
| PVC trim boards (corners, fascia, window and door casing) | Cellular PVC, white, paintable | $3 to $10 per linear ft | $6 to $16 per linear ft |
| Beadboard and soffit | Cellular PVC | $4 to $9 per sq ft | $8 to $16 per sq ft |
| Fiber cement lap siding (for comparison) | Cement board, primed or factory painted | $2 to $6 per sq ft | $5 to $14 per sq ft |
| Vinyl lap siding (for comparison) | Solid vinyl, through-color | $1.50 to $5 per sq ft | $3 to $10 per sq ft |
Siding contractors often price by the “square,” which is 100 sq ft of wall coverage. A quote of $1,500 per square is the same as $15 per square foot.
What the Manufacturer Confirms About the Lap Siding
Because prices are so variable, it helps to know what you are paying for. According to the manufacturer’s lap siding page:
- Reveal heights: 4.5 inch and 7.5 inch, with a lightly grained, cedar-style surface.
- Length: 16 ft panels, which means fewer butt joints on long walls than shorter boards.
- Installation system: a drop-and-lock design with a hidden nailing flange and rabbeted trim that holds the siding ends for a caulk-free look.
- Fire performance: a Class A flame spread rating.
- Warranty: a lifetime limited warranty that the manufacturer says covers product performance and fade and stain.
- Color: a limited palette of prefinished colors, including whites, grays, tans and a green, so no field painting is needed.
- Availability: sold in a limited group of Northeast and Midwest states at the time of writing.
That regional limit matters for budgeting. If you live outside the sales area, the lap product may not be available at all, and you may be looking at PVC trim with a different siding material, or a different PVC siding maker. The trim line, by contrast, is widely stocked.
Whole-House Cost Examples
Most two-story homes have somewhere between 1,500 and 3,000 sq ft of exterior wall area to cover after subtracting windows and doors. Here is how the general per-square-foot ranges translate:
- Small ranch, 1,500 sq ft of siding: roughly $15,000 to $30,000 in PVC lap, versus about $7,500 to $21,000 in fiber cement and $4,500 to $15,000 in vinyl.
- Mid-size colonial, 2,200 sq ft of siding: roughly $22,000 to $44,000 in PVC lap, versus about $11,000 to $31,000 in fiber cement.
- Accent only, 300 sq ft of PVC shingle on gables: roughly $4,000 to $7,200 plus painting, a common way to get the look without cladding the whole house.
Trim adds up fast. A typical house can easily need several hundred linear feet of corner boards, window and door casing, fascia and frieze. Many homeowners pair PVC trim with fiber cement or vinyl siding because trim is where wood rot usually starts.
Factors That Raise or Lower the Price
Tear-off and sheathing repairs
Removing old siding generally adds about $1 to $3 per sq ft, and rotted sheathing found during tear-off is billed separately. Ask for a per-sheet price in the contract so surprises are predictable.
Wall complexity
Gables, dormers, bay windows and lots of corners mean more cutting, more trim and more labor hours. A simple box-shaped ranch costs less per square foot than a Victorian with turrets.
Height and access
Second and third stories require staging or lifts. Expect higher labor on tall walls, steep lots and homes with decks or landscaping that block ladder access.
Painting
Prefinished lap siding skips painting. Paintable profiles and trim need a coating rated for PVC; follow the manufacturer’s painting guidance, especially for darker colors, which absorb more heat.
Thermal movement detailing
PVC expands and contracts with temperature more than wood or fiber cement. Correct gapping, fastening and joint details take installer skill, and experienced crews may price accordingly. A cheap bid from a crew unfamiliar with PVC can cost more in callbacks.
AZEK vs Fiber Cement vs Vinyl
Versus fiber cement: Fiber cement costs less per square foot and is noncombustible, which matters in wildfire zones. It is heavy, creates silica dust when cut (wet cutting or dust-collecting saws and respirators are needed), and painted boards need repainting over time. Cellular PVC is lighter, cuts with standard woodworking tools, and does not absorb water.
Versus vinyl: Vinyl is the budget leader and comes in many colors and profiles. It is thinner and hollow behind the face, so it can sound and feel less substantial, and it can crack on impact in cold weather. Cellular PVC boards are solid, thicker and closer to the look of painted wood.
Long-term cost: The upfront premium is only half the comparison. Painted wood and painted fiber cement typically need repainting every several years, and exterior repainting on a two-story house is a significant recurring bill. Prefinished PVC lap siding avoids that cycle, although it still needs an occasional wash with a soft brush and mild soap to remove dirt and mildew. Over 20 or 30 years, the gap between materials narrows, so weigh how long you plan to stay in the home.
Versus cedar: Cedar can land in a similar installed price band but needs regular staining or painting and is vulnerable to rot and insects. PVC appeals to owners who want the wood look with less upkeep.
How to Get an Accurate Quote
- Confirm availability. Ask a local lumberyard or contractor which PVC siding profiles and colors they can source in your area.
- Measure or have walls measured. Get total wall square footage net of openings and a separate trim linear footage.
- Request itemized bids. Ask for siding, trim, housewrap, flashing, tear-off, disposal, sheathing repair allowance and painting as separate lines.
- Compare at least three contractors. Ask each how many PVC siding jobs they have done and whether they follow the manufacturer’s installation instructions, which can affect the warranty.
- Check permits and HOA rules. Many towns require a permit for re-siding, and some HOAs restrict materials and colors.
When to Hire a Professional
Siding a whole house involves weather-resistive barriers, window and door flashing, and work at height. A licensed, insured siding contractor is the right call for most homeowners, and for any wall above the first story. Before tear-off on a home built before 1980, test for asbestos in old siding and for lead in old paint, since both are common in older exteriors and must be handled with proper safety practices.
Frequently Asked Questions
Is AZEK siding more expensive than vinyl?
Yes. Cellular PVC siding generally costs two or more times as much as standard vinyl per square foot installed, because the boards are solid, thicker and installed with more trim detailing.
Is AZEK siding cheaper than fiber cement?
Usually not. Fiber cement tends to cost less per square foot, though the gap narrows when you factor in painting and repainting.
Does AZEK lap siding need to be painted?
The lap siding is prefinished with a color-infused cap and does not need paint. The shingle and board and batten profiles are paintable products.
What warranty comes with AZEK siding?
The manufacturer offers a lifetime limited warranty. Read the current warranty document for exact coverage and transfer terms.
Can I install AZEK siding myself?
Experienced DIYers can install trim and small accent areas, but whole-house siding requires flashing, expansion gapping and work at height that most homeowners should leave to a pro.
Is AZEK siding available everywhere?
No. The lap siding is sold in a limited group of states, so confirm availability with a local dealer before planning around it.