Most blues fall into one of two traps: too bright and they feel juvenile, too dark and they swallow the room. Behr Adirondack Blue (color code N480-5) avoids both. Behr describes it as a stable, reassuring slate blue, and that is a fair summary: a mid-depth blue softened with a generous amount of gray, the color of a lake under an overcast sky.
Its published hex value is #74858F (RGB 116, 133, 143). Most color references put its light reflectance value (LRV) at about 22, which makes it a medium-deep color: clearly blue on the wall, but muted enough to act almost like a neutral. A few databases list a much higher LRV, so treat the figure as approximate and judge it from a real sample.
In practice, Adirondack Blue suits bedrooms, offices, dining rooms, cabinetry, front doors and full exteriors. It pairs naturally with warm whites, wood tones and brass, and it holds up well in bright light where paler blues wash out.
Behr Adirondack Blue at a Glance
| Spec | Value | What it means |
|---|---|---|
| Color code | N480-5 | Give this code to the paint counter for an exact mix |
| Hex / RGB | #74858F / 116, 133, 143 | Useful for digital mockups; screens never match paint exactly |
| LRV | About 22 (per most color references) | Medium-deep; reflects roughly a fifth of the light that hits it |
| Color family | Blue (slate blue-gray) | A blue muted with a strong gray base |
| Temperature | Cool | Reads calm and crisp; warmed easily by wood and warm whites |
| Interior / exterior | Both | Can be tinted into interior and exterior products |
| Best finishes | Matte or eggshell walls; satin or semi-gloss trim and doors | Lower sheen hides flaws in deeper colors |
Because Behr’s own swatch is the final word and formulas can change, check the code and LRV on a current chip before buying several gallons.
Understanding the Undertones
Adirondack Blue is a cool blue-gray. The gray content is what keeps it sophisticated. Some color reviewers also note a faint green-gray cast, which shows most in north light or beside green landscaping, and that slight muddiness is part of why the color feels natural rather than synthetic.
How light changes it:
- North-facing rooms: cool, indirect light pulls out the gray and any hint of green. The color reads moody and slate-like.
- South- and west-facing rooms: warm light brings out the blue, and the color looks clearer and a bit brighter.
- East-facing rooms: bright and blue in the morning, deeper and grayer by evening.
- Artificial light: warm-white bulbs around 2700K to 3000K soften it nicely. Daylight bulbs at 5000K make it look icier and grayer.
Best Rooms for Adirondack Blue
At its depth, this is a color that wants a purpose. It shines in rooms where a calm, enclosed feeling is a plus.
- Bedrooms: the gray base is restful, and it pairs well with white bedding and natural wood.
- Home offices and studies: focused and quiet, with good contrast for bookshelves and art.
- Dining rooms: rich under evening light and flattering with wood tables and candlelight.
- Bathrooms: works beautifully with white tile and chrome or brass fixtures. Use a moisture-resistant bathroom finish.
- Kitchen cabinets and islands: a popular move with white counters and warm metal hardware.
- Exteriors and front doors: on a full exterior with crisp white trim it gives a classic coastal or cottage look.
Be cautious in small, dim rooms with only north light. There, an LRV in the low 20s can feel heavy. Either embrace the cocoon effect with good lamps, or choose a lighter blue-gray from the same strip.
Coordinating Colors and Pairings
Behr’s own guidance is simple: Adirondack Blue pairs well with neutral colors like white, beige and gray. Here is how to apply that.
| Role | What to choose | Effect |
|---|---|---|
| Trim and ceilings | Soft warm white | Clean contrast without stark glare |
| Crisp contrast | Bright, neutral white | Sharper, more coastal look |
| Adjoining rooms | Light warm gray or greige | Smooth flow from a deep room to lighter spaces |
| Warm balance | Sandy beige or soft tan | Takes the chill off the cool blue |
| Accent | Rust, terracotta or ochre | Complementary warmth for pillows, art and doors |
| Deep partner | Charcoal or navy | Tonal, layered look for cabinets or an island |
Materials matter as much as paint. White oak and walnut floors, unlacquered brass, leather, linen and greenery all warm the color. Cool gray tile and stainless steel push it toward a sleeker, cooler look.
Close Matches and How It Compares
Color-matching databases point to a few blue-grays from other makers in the same territory, including Sherwin-Williams Storm Cloud and Blustery Sky. Cross-brand matches are close, not identical: base formulas and sheens differ, so a match that looks the same online can look noticeably bluer or grayer on your wall.
Compared with a classic navy, Adirondack Blue is lighter and grayer, so it feels less formal. Compared with a pale blue-gray, it has much more presence and hides scuffs better on doors and cabinets. If you love the color but want something lighter for a whole-house scheme, look at the lighter shades on the same Behr color strip and use Adirondack Blue as the accent.
Using Behr Adirondack Blue Outside
Exterior color behaves differently from interior color. Full sun bleaches the eye’s perception of a hue, so a medium-deep blue-gray that looks moody on a chip tends to read lighter and softer on siding. That works in this color’s favor: on a house, Behr Adirondack Blue often lands as a calm, weathered slate rather than a bold blue.
A few practical points for exterior use:
- Sample on the house itself. Paint a 2 x 2 ft patch on two sides of the house, one sunny and one shaded, and look at it from the street at different times of day.
- Consider the roof. Charcoal, black and gray roofs suit it naturally. Brown or red-toned roofs can clash with the cool undertone, so test carefully.
- Plan the trim. Bright white trim gives a crisp, traditional look. Soft off-white trim feels more relaxed and less stark in strong sun.
- Use the right product. Choose an exterior acrylic rated for your siding material, and use a satin or semi-gloss enamel on doors and shutters for washability.
- Expect slow fading. Any tinted exterior color softens over years of UV exposure, and deeper colors absorb more heat. Keep leftover paint, labeled with the code, for touch-ups.
On a front door alone, the color makes a quieter statement than red or black while still standing out against white, gray or beige siding.
How to Test and Apply It
- Sample on several walls. Use large paint sample swatches or painted poster boards at least 12 x 12 inches. Look morning, afternoon and night.
- Place samples next to fixed elements. Hold them beside your flooring, countertops and fabrics, which influence how the blue reads.
- Prime properly. Over a light wall, a tinted gray primer helps a medium-deep color cover in two coats.
- Cut in, then roll. Keep a wet edge and finish each wall before stopping to avoid lap marks.
- Allow two full coats. Deeper colors look patchy with one coat even when the label claims one-coat coverage.
- Buy enough in one batch. Box all cans together so color stays consistent.
Troubleshooting
- Looks too gray: the room light is cool. Try warmer bulbs, or a blue with less gray.
- Looks too dark: step one shade lighter on the strip or add more light sources.
- Uneven sheen: touch-ups on flat paint flash. Repaint the full wall corner to corner.
- Clashes with flooring: orange-toned wood can fight with cool blue. Add a rug or neutral textiles in between.
- Fading on a door: use an exterior-grade enamel and expect some softening on a sunny, south-facing door over time.
Cost and When to Call a Painter
Covering a 12 x 12 ft bedroom usually takes about 2 gallons for two coats on the walls plus a quart for any trim. Paint itself runs a mid-range cost per gallon depending on the product line. Professional interior painting typically lands in the range of $2 to $6 per square foot of wall, more for cabinets and detailed trim.
DIY is reasonable for walls and front doors. Hire a pro for cabinets (where prep and spraying make the difference), two-story exteriors, stairwells and homes built before 1978, where existing paint may contain lead and must be tested before sanding or scraping.
Frequently Asked Questions
What color is Behr Adirondack Blue?
It is a medium-deep slate blue with a strong gray base and a cool temperature. Behr describes it as a stable, reassuring slate blue.
What is the LRV of Adirondack Blue?
Most color references list it at about 22, which is medium-deep. Some databases show different figures, so confirm on the current Behr chip.
Does Adirondack Blue look green?
It can show a slight green-gray cast in cool north light or beside green landscaping. In warm light it reads as a clearer blue.
Can I use Adirondack Blue on the outside of my house?
Yes. The color can be tinted into exterior products, and it pairs well with white trim and natural wood or stone accents.
What white trim goes with Adirondack Blue?
A soft warm white keeps the look gentle, while a bright neutral white gives a crisper, more coastal contrast. Test both against your sample.
Is Adirondack Blue good for kitchen cabinets?
Yes. Its depth hides fingerprints and it pairs well with white counters and brass hardware. Use a cabinet-grade enamel with proper prep.