Picking the right brick paint colors can transform a dated red-brick house or a builder-grade fireplace into something that looks current and intentional. But painting brick is a permanent decision, since it is nearly impossible to reverse cleanly, so the color you choose matters even more than usual. Get it right and you gain instant curb appeal and a fresh, modern look. Get it wrong and you are stuck with it.
Part of our Paint & Walls guide — explore the full guide →
For brick exteriors and fireplaces, the colors that hold up over time tend to be timeless neutrals rather than trendy statements. Here are the shades worth considering and how to apply them.
- Why People Paint Brick
- The Best White and Off-White Brick Colors
- Greige and Warm Neutrals
- Bold and Dramatic Options
- Consider Limewash for a Softer Effect
- Choosing the Right Sheen
- Interior Fireplace Brick Colors
- What Colors Pair Best With Painted Brick
- How to Paint Brick Correctly
- Should You Paint or Stain Brick?
- What It Costs
- Choosing a Brick Wall Color: Brown and Gray Masonry Paint
- Final Advice
Why People Paint Brick
Old brick often reads orange, blotchy, or simply dated, especially the red and salmon tones common in mid-century homes. A coat of paint unifies the surface, hides mismatched mortar repairs, and modernizes the whole facade. Inside, a painted fireplace can make a whole room feel lighter and more contemporary.
The trade-off is maintenance and permanence. Painted brick needs occasional touch-ups, and stripping it later is expensive and messy. Choose a color you can live with for a decade or more.
The Best White and Off-White Brick Colors
White is the most popular choice for painted brick, and for good reason. It brightens, cleans up, and never looks dated. But avoid stark, sterile white, which can look flat. Reach for warm, soft whites with a little depth:
- Sherwin-Williams Alabaster (SW 7008) — a warm, creamy white that is arguably the most-used exterior brick color in the country.
- Benjamin Moore White Dove (OC-17) — a soft white with a gentle warmth, gorgeous on interior fireplaces.
- Sherwin-Williams Pure White (SW 7005) — a clean, balanced white without a yellow cast.
Greige and Warm Neutrals
If bright white feels too bold, greige, the blend of gray and beige, gives a softer, grounded look that hides dirt better on exteriors. These brick paint colors read sophisticated without going stark:
- Sherwin-Williams Agreeable Gray (SW 7029) — a warm, flexible greige that pairs with almost any trim.
- Benjamin Moore Revere Pewter (HC-172) — a light, earthy greige beloved for its versatility.
- Sherwin-Williams Accessible Beige (SW 7036) — a warmer neutral that keeps a cottage or traditional home cozy.
Bold and Dramatic Options
For homeowners who want a statement, dark and moody brick can look striking, especially on a modern or Tudor-style home:
- Sherwin-Williams Iron Ore (SW 7069) — a rich near-black charcoal that gives dramatic, modern curb appeal.
- Benjamin Moore Kendall Charcoal (HC-166) — a deep warm gray that feels architectural.
- Sherwin-Williams Urbane Bronze (SW 7048) — a warm, earthy dark neutral that flatters brick texture.
Dark colors absorb heat, so on a sun-blasted southern exposure they can accelerate wear. Factor that into your choice.
Consider Limewash for a Softer Effect
If you love the look of aged European brick but do not want full opaque coverage, limewash is a mineral-based finish that soaks into the brick and leaves a soft, weathered, matte look. Products like Romabio Classico Limewash come in whites and warm neutrals and can be partially wiped back for a natural, mottled effect. It also breathes, which is healthier for the brick than trapping it under a plastic-like film.
Choosing the Right Sheen
For exterior brick, use a flat or matte sheen. It looks natural, hides surface irregularities, and does not draw attention to the mortar joints. On an interior fireplace, matte or eggshell works well, with eggshell adding a touch of wipeability near a hearth. Skip glossy finishes on brick, since they highlight every bump and can look artificial.
Interior Fireplace Brick Colors
Painting an interior brick fireplace is a smaller, lower-risk project than a whole exterior, and it is often the fastest way to modernize a living room. The most requested brick paint colors for fireplaces are soft whites and warm greiges, because they lighten a dark corner and let a mantel and decor stand out. Benjamin Moore White Dove and Sherwin-Williams Alabaster are perennial fireplace favorites for exactly this reason.
For a bolder, cozier look, a deep charcoal like Sherwin-Williams Iron Ore turns a fireplace into a dramatic focal point, especially in a room with plenty of natural light and lighter walls. If you want the character of the brick to peek through, a German smear or limewash technique on the fireplace gives a soft, textured, old-world result rather than full opaque coverage. Whatever color you choose, use a heat-resistant paint rated for the firebox surround if the brick gets warm, and keep paint off the interior firebox itself.
What Colors Pair Best With Painted Brick
Once your brick is painted, the surrounding palette makes it sing. Coordinating colors thoughtfully keeps the whole facade or room looking intentional:
- White brick pairs beautifully with black window frames, natural wood doors, and greenery for a fresh, modern-farmhouse look.
- Greige brick works with warm white or bronze trim and complements both cool and warm accent colors.
- Charcoal or black brick looks striking against light wood, brass hardware, and crisp white trim for high contrast.
- Limewashed brick suits soft, muted landscaping and natural stone walkways for a timeless European feel.
For exteriors, coordinate the brick color with your roof shingles, which are expensive to change, rather than fighting them. A warm brown or gray roof pairs naturally with greige or white brick, while a black roof handles charcoal brick well. Pull the trim, door, and shutter colors from there to complete a cohesive exterior.
How to Paint Brick Correctly
The color only lasts if the prep and products are right. Brick is porous and needs breathable, masonry-appropriate paint:
- Clean the brick thoroughly with a wire brush and a trisodium phosphate solution to remove dirt, chalk, and efflorescence, then let it dry completely.
- Repair any cracked mortar and let repairs cure.
- Apply a masonry primer designed for brick to seal the surface and ensure adhesion.
- Paint with a high-quality acrylic latex masonry or elastomeric paint, which flexes and breathes.
- Use a thick-nap roller for the field and a brush to work paint into the mortar joints and texture.
- Apply two coats, allowing full dry time between them.
Should You Paint or Stain Brick?
Before committing to opaque paint, know that staining is an alternative worth weighing. Masonry stain penetrates the brick and changes its color while letting the natural texture and variation show through, and unlike paint it will not peel, since there is no film sitting on the surface. Stain also breathes, allowing moisture to escape the brick, which reduces the spalling and flaking that can plague painted brick over the years.
The trade-off is that stain offers less dramatic transformation than paint. It shifts and refreshes the existing color rather than fully covering it, so if your brick is badly mismatched or you want a crisp solid white, paint is the better choice. But if your brick is structurally sound and you simply want to update or unify the tone while keeping its character, stain is often the smarter long-term move. Brands like Romabio and Nawkaw make masonry stains in a range of the same neutrals you would consider for brick paint colors, and a stained facade typically needs less maintenance down the road than a painted one.
What It Costs
Painting brick is labor-intensive because of the texture and prep. A DIY exterior job runs $1 to $3 per square foot in materials, while hiring pros typically costs $3,500 to $10,000 for a full house, depending on size and condition. A single interior fireplace is a far smaller job, often $75 to $200 in materials for a confident DIYer.
Choosing a Brick Wall Color: Brown and Gray Masonry Paint
The best brick wall color for most homes is one that works with the roof, the mortar and the surrounding stone or siding, not just one you like on a chip. Brown painted brick keeps a warm, natural look close to the original masonry, while gray masonry paint gives a cooler, more modern finish. Both hide dirt better than white and suit homes where bright paint would feel too stark.
Brown Painted Brick
Brown works well when the goal is to even out mismatched or patched brick without changing the house’s character. Mid browns and warm taupes look natural on traditional, Craftsman and ranch homes, and they pair easily with cream trim and bronze or black hardware. Very dark brown can read as flat from the street, so test a slightly lighter shade than you think you want; masonry absorbs paint and often dries deeper than the sample chip.
Gray Masonry Paint
Gray masonry paint ranges from pale stone gray to deep charcoal. The undertone matters more than the depth: blue-leaning grays look crisp next to white trim and black windows, while warm grays with a hint of beige suit brown or tan roofs. Grey masonry paint can look cold on a north-facing wall, so check samples at different times of day.
| Color family | Best with | Watch out for |
|---|---|---|
| Warm brown or taupe | Brown or red roofs, cream trim, wood doors | Can look dated with orange-toned mortar |
| Warm gray | Brown, tan or weathered wood roofs | Can look muddy in low light |
| Cool gray | Black or gray roofs, white trim | Can look cold on shaded walls |
| Charcoal | Black roofs, light wood, brass accents | Absorbs heat on sunny walls |
Mortar and Interior Brick Walls
Paint covers the mortar too, so the joints disappear into one solid color. If you want the brick pattern to stay visible, consider a stain or a limewash that soaks in unevenly. Inside, a painted brick accent wall in brown or gray reads warmer and less reflective than white, which suits dens and living rooms with warm lighting.
Choosing the Paint Product
Whatever the color, use a breathable acrylic masonry paint made for brick and confirm on the label that it is rated for your surface. If old paint is present on a home built before 1978, test it for lead before wire brushing or scraping, and follow lead-safe practices if the test is positive.
Final Advice
When choosing brick paint colors, order sample pots and test them directly on the brick in different light before committing, because the porous surface can shift a color noticeably. Lean toward timeless neutrals unless you truly love a bold look, use breathable masonry products, and never skip the cleaning and priming steps. Painted brick is permanent, so a little patience up front protects a decade of curb appeal.