Home Improvement

Can You Wallpaper Over Textured Walls? A Complete Prep Guide

Can You Wallpaper Over Textured Walls? A Complete Prep Guide

Anyone who’s tried to wallpaper directly over an orange peel or knockdown texture wall knows the disappointment — every dimple and bump telegraphs through the paper, the seams catch on the texture, and the whole installation looks like sad bandaging. Yet most U.S. homes built after 1980 have textured walls, which means wallpaper became the design choice you couldn’t have. The good news: can you wallpaper over textured walls has a yes answer, but it requires either skim-coating the walls smooth first or choosing one of a few specific wallpaper types that hide texture rather than fight it.

The two paths below — full skim coat vs. heavy-grade wallpaper — both work. Here’s how to choose between them.

First: Identify Your Texture Type

Texture severity determines whether skim coating is essential or optional.

  • Light orange peel (small dimples, barely noticeable on close inspection): Many heavy wallpapers cover this without prep.
  • Heavy orange peel or splatter (raised bumps you can feel clearly with your hand): Skim coat strongly recommended.
  • Knockdown texture (flat-troweled bumps, common in southwestern U.S.): Skim coat required for any decent wallpaper outcome.
  • Popcorn texture (rough sprayed acoustic, mostly ceilings but sometimes walls): Must be removed entirely. Cannot be skim-coated effectively.
  • Stomp/swirl/Spanish texture (deep decorative patterns): Full skim coat required.

Path 1: Skim Coat the Walls Smooth

This is the gold-standard approach. Skim coating produces the same flat substrate that wallpaper installers prefer for new construction. The result is invisible seams, sharp pattern alignment, and a finish that lasts decades.

Materials Needed

  • USG Easy Sand 45 setting-type joint compound or pre-mixed all-purpose mud (USG Plus 3 works well)
  • 12-inch and 6-inch drywall knives
  • Mud pan
  • 1/4-inch roller and roller frame
  • Primer (Zinsser Bulls Eye 1-2-3 or USG First Coat)
  • Sanding pole with 120 and 220 grit screens

Steps

  1. Clean walls thoroughly with TSP substitute. Patch any cracks or holes with regular spackle and sand flush.
  2. Roll a coat of bonding primer. Lets new mud adhere to the existing painted surface.
  3. Apply first skim coat: roll a thin layer of joint compound over a 4-foot section, then immediately knock down with a 12-inch drywall knife. Push hard to flatten texture into the new mud.
  4. Let dry 4-12 hours depending on humidity.
  5. Apply second skim coat the same way. The second coat fills any remaining low spots from the first.
  6. Sand smooth with 120 grit, then 220 for finish.
  7. Prime again with wallpaper primer (Roman PRO-977, $35 per gallon, the industry standard).
  8. Let primer cure 24 hours before hanging wallpaper.

Skim coating a 12×12 room takes a confident DIYer about 6-8 hours of working time spread across two days, plus dry time. Materials cost $80-$140. Hiring it out: $400-$900 per room.

Path 2: Liner Paper

For texture too heavy for direct wallpaper but where you want to skip the skim coat, professional-grade liner paper bridges the gap.

Liner paper is heavyweight unprinted paper specifically designed to be hung horizontally over textured surfaces. It bridges minor texture, creates a smooth surface for the decorative wallpaper, and dramatically improves seam appearance. Brewster Wallcovering and York Wallcoverings both offer liner papers in the $35-$70 per double roll range.

Hang liner horizontally first, let dry 24-48 hours, then hang decorative wallpaper vertically over it. The cross-grain orientation prevents seams from aligning between the two layers.

Path 3: Choose Texture-Forgiving Wallpaper

If skim coating and liner are off the table, certain wallpaper types tolerate light texture better than others.

Best Bets for Direct Application Over Light Texture

  • Heavy non-woven wallpaper: Brands like Schumacher, Cole & Son, and Anthropologie’s heavyweight collections have substrate weight that bridges minor texture.
  • Grass cloth and natural fiber wallpapers: The natural variation in fiber visually disguises any texture telegraphing through.
  • Heavily patterned papers: Busy patterns with no large solid areas hide imperfections far better than minimalist designs.
  • Embossed or textured wallpaper itself: Faux-grasscloth, faux-stucco, or embossed paintable wallpapers (Anaglypta) literally use the existing texture as part of the new texture.

Avoid These Over Texture

  • Thin or vinyl wallpapers — telegraph every bump
  • Solid color or large minimal patterns — every imperfection visible from across the room
  • Highly reflective metallic finishes — bumps catch light differently than flat areas
  • Peel-and-stick wallpaper — adhesion fails on textured surfaces, resulting in lifted edges within months
Looking to buy Can You Wallpaper Over Textured Walls? A Complete Prep Guide? Compare top-rated options.
Shop on Amazon →Browse Our Shop
As an Amazon Associate we earn from qualifying purchases.

Peel-and-Stick: A Special Case

Peel-and-stick wallpaper specifically struggles on textured walls. The adhesive needs continuous contact to grip, and texture creates microscopic air gaps where the paper isn’t actually touching the wall. Within 6-12 months, edges curl, seams separate, and panels start sliding down.

If you must use peel-and-stick over texture, plan for a temporary install (1-2 years maximum) and skim coat anyway if you want it to last. Brands like Spoonflower and Tempaper acknowledge this in their installation guides.

Removing the Texture Entirely

For knockdown or stomp textures, removal can be faster than skim coating in some cases. The process:

  1. Spray walls with warm water from a pump sprayer. Let soak 5-10 minutes.
  2. Scrape off softened texture with a 6-inch drywall knife.
  3. Let walls dry 24 hours.
  4. Skim coat any remaining low spots.
  5. Prime and hang wallpaper.

Caveat: pre-1980 textures may contain asbestos. Test before scraping. The EnviroTest Asbestos Test Kit ($30) gives you results in 5-7 days. If positive, hire a licensed abatement contractor.

Cost Comparison

For a 12×12 room (480 sq ft of wall):

  • Direct wallpaper over light texture (heavy paper): $200-$600 in wallpaper, no prep cost
  • Liner paper + decorative paper: $80-$140 in liner, $200-$600 in decorative
  • Skim coat + decorative paper: $80-$140 in materials for skim coat, $200-$600 in paper
  • Texture removal + skim coat + paper: $40-$80 for removal, $80-$140 for skim coat, $200-$600 for paper

Adding professional labor: skim coating runs $400-$900 per room, wallpaper installation runs $3-$8 per square foot.

Frequently Asked Questions

Will all wallpaper show through textured walls?

Most thin or matte papers will. Heavy non-woven, grasscloth, and busy-patterned papers hide light texture well. Heavy textures need skim coating regardless of paper choice.

How long does a skim coat take to dry?

4-12 hours per coat depending on humidity, room temperature, and coat thickness. Setting-type compounds (USG Easy Sand 20, 45, or 90) dry faster — the number is roughly the dry time in minutes.

Can I use peel-and-stick wallpaper on textured walls?

Not for lasting installations. Peel-and-stick needs smooth substrate to maintain adhesion. Plan for skim coating if you want peel-and-stick to last more than a year.

Is liner paper hard to install?

Easier than decorative wallpaper because it doesn’t need to align patterns. A first-time installer can hang liner paper successfully with basic prep and patience.

Should I just paint instead of wallpaper on heavy texture?

If you don’t want to skim coat, yes — paint is the path of least resistance for heavy texture. Wallpaper rewards the prep work but doesn’t tolerate shortcuts.