French doors bring in light and give a patio or deck a grand entrance, but they are also one of the draftiest openings in many homes. French storm doors solve that by adding a second pair of doors outside the main set, creating an insulating air space, blocking wind-driven rain, and letting you swap glass for screens on mild days. They are less common than single storm doors, so finding the right size and style takes more homework. This guide covers configurations, sizing, materials, costs, and installation so you can choose with confidence.
Part of our Windows & Doors guide — explore the full guide →
- What Are French Storm Doors?
- Benefits and Drawbacks
- Standard Sizes for French Storm Doors
- Materials and Styles
- What French Storm Doors Cost
- How to Install French Storm Doors
- Maintenance and Troubleshooting
- Choosing Hardware and Features
- Are French Storm Doors Worth It?
- Frequently Asked Questions
- Can you put a storm door on French doors?
- Do French storm doors damage the primary door?
- How long do French storm doors last?
- Can I install a double storm door myself?
- Can a regular single storm door be installed on French doors?
- Can you put a storm door on outswing French doors?
- What are the alternatives to French storm doors for adding screens?
- Are French storm doors hurricane rated?
What Are French Storm Doors?
French storm doors are double storm doors designed to mount on the exterior of a double-door opening, usually in front of hinged French patio doors or a pair of entry doors. They come in two main configurations. In a true double setup, both storm panels swing open, often with an astragal where they meet. In an active-inactive setup, one panel operates daily while the other stays latched with top and bottom flush bolts, opening only when you need the full width to move furniture.
They are distinct from sliding patio storm doors or retractable screens. Because French storm doors swing, they need clearance for both panels and a solid frame on the exterior to fasten to.
Benefits and Drawbacks
Adding a storm layer does more than people expect:
- Energy savings: Storm panels add an insulating air gap, cutting drafts and heat loss through older single-pane or poorly sealed French doors. The Department of Energy notes that storm doors and windows can meaningfully reduce heat loss through openings.
- Weather protection: Wooden French doors exposed to sun and rain need refinishing every few years. A storm door shields the finish and extends its life.
- Ventilation: Interchangeable or retractable screens let you open the main doors for a breeze while keeping insects out.
- Security: Keyed locking handles add a second barrier.
There are downsides. Storm doors on south- or west-facing openings can trap intense heat against the primary door, and many door manufacturers warn that this can warp vinyl frames or void finish warranties. Low-E storm glass and venting panels reduce the risk. Double storm doors also cost more and require more careful alignment than singles.
Standard Sizes for French Storm Doors
Most residential French doors are 80 inches tall and come in overall widths of 60, 64, 72, and 96 inches. French storm doors are sold in matching widths, often with expander strips that allow about 1 inch of adjustment. Common nominal sizes include:
| Opening Width | Typical Storm Unit | Panel Width Each |
|---|---|---|
| 60 in (5 ft) | 2 x 30 in | 30 in |
| 64 in | 2 x 32 in | 32 in |
| 72 in (6 ft) | 2 x 36 in | 36 in |
Measure the opening between the exterior brick molding or trim at the top, middle, and bottom, and measure height on both sides. Use the smallest numbers. If the opening varies more than 1/4 inch or is not square, you may need custom sizing or shimming. Openings wider than 72 inches or taller than 81 inches usually require custom French storm doors, which can add 30 to 60 percent to the price.
Check swing clearance too. Each panel needs room to open 90 degrees or more without hitting deck railings, light fixtures, hose bibs, or furniture.
Materials and Styles
Aluminum
Aluminum is the most common frame material. It is light, rust resistant, and affordable, usually $500 to $1,200 for a double unit. Look for a frame thickness of at least 1 inch and a foam-filled core for rigidity.
Wood-Core and Aluminum-Clad
Wood cores wrapped in aluminum or vinyl feel more solid and insulate better. They cost more, typically $900 to $2,000 for a pair.
Solid Wood
Custom wood storm doors suit historic homes. Local millwork shops can build them to match divided-lite French doors, but expect $1,500 to $4,000 or more, and plan on repainting every 5 to 7 years.
Glass Styles
- Full-view glass: Shows off the French doors behind. Some models have interchangeable screen inserts.
- Retractable screen: Glass slides down to reveal a roll-up screen, offering easy seasonal switching.
- Mid-view: A kickpanel at the bottom adds durability for pets and kids.
- Low-E glass: Reflects heat and reduces the heat-trap problem on sunny exposures.
Pick a color that matches your trim, and consider hardware finishes such as matte black, oil-rubbed bronze, or brushed nickel to tie into your exterior fixtures.
What French Storm Doors Cost
For a standard 60- or 72-inch opening, budget roughly:
- Basic aluminum double storm door: $500-$1,000.
- Mid-grade with retractable screens and Low-E glass: $1,000-$1,800.
- Custom wood or oversized units: $1,800-$4,500.
- Professional installation: $250-$600 for a double unit, higher if the opening needs trim repair or blocking.
Most homeowners spend $900 to $2,200 installed. Replacing rotted brick molding or adding a flat mounting surface can add $150 to $400.
How to Install French Storm Doors
Installation is within reach for an experienced DIYer with a helper, though double doors are far fussier than singles because the two panels must meet evenly. Always follow the manufacturer’s instructions; this is a general overview.
- Check the opening. Confirm the exterior trim is flat, solid, and free of rot. Fill gaps and repair damaged molding first.
- Determine the hinge sides. Decide which panel is active. Most units can be set up for either configuration.
- Cut the Z-bar hinge rails to length using a hacksaw, following the height you measured and allowing for the drip cap.
- Attach the hinge rails to each panel. Pre-drill and screw as directed.
- Install the drip cap at the head of the opening, centered and level.
- Hang the panels. Set each panel in the opening with shims under it to create even clearance, then screw the hinge rails to the trim.
- Adjust the meeting stile. The panels should meet evenly with a gap of about 1/8 inch. Adjust until they close without rubbing.
- Install flush bolts on the inactive panel so it locks at the top and bottom.
- Add expanders and sweeps at the bottom to seal against the threshold.
- Mount the handles, locks, and closers. Many units use two pneumatic closers per panel, top and bottom, for control in wind.
Plan on 4 to 6 hours for a first-time DIY installation. If the door opening is out of square by more than 1/4 inch, or the trim needs rebuilding, hiring a pro who installs storm doors regularly often pays for itself.
Maintenance and Troubleshooting
A little upkeep keeps French storm doors working smoothly. Lubricate hinges and latches with a silicone spray twice a year. Tighten closer brackets and handle screws each spring, since wind loads loosen them. Clean glass with a non-ammonia cleaner, and wash aluminum frames with mild soap and water.
If panels start to sag or rub, check the hinge-rail screws first; they may have stripped out in soft trim. Longer screws or wood filler with new holes usually fixes it. Replace worn sweeps and weatherstripping every few years to keep the insulating air space effective. On hot, sunny days, vent the glass or swap in the screen to prevent heat buildup against the primary door.
Choosing Hardware and Features
Small hardware choices make a big difference in daily use. A keyed mortise-style lockset on the active panel is sturdier than a basic push-button latch, and a deadbolt adds security for doors facing a backyard or alley. Look for closers with a hold-open washer so you can prop the panel while carrying groceries or patio furniture, plus a wind chain or heavy-duty closer on exposed sites where gusts can slam a panel against the siding.
On the inactive panel, confirm the flush bolts engage solidly into the head jamb and threshold. Weak bolts let the pair rattle and leak air. If pets use the doors, a pet-door insert panel or a kickplate protects the lower glass or screen from scratches. Finally, compare warranties: better brands offer 10 years or lifetime coverage on frames and 1 to 5 years on hardware and glass.
Are French Storm Doors Worth It?
For homes with older French doors, drafty patio openings, or wood doors that suffer from weather exposure, the answer is usually yes. A well-fitted double storm door can make the room behind it noticeably more comfortable, protect an expensive primary door, and add a screen option for summer. For new, high-performance French doors with good seals and a covered porch, the benefits are smaller, and the added cost may not pay back. Weigh your climate, exposure, and door condition before you buy.
Frequently Asked Questions
Can you put a storm door on French doors?
Yes. Double storm doors are made specifically for French door openings, typically in 60-, 64-, and 72-inch widths. Custom units are available for other sizes.
Do French storm doors damage the primary door?
On sunny exposures, trapped heat can damage vinyl or finishes. Choose Low-E glass, vent the storm door in summer, and check your primary door’s warranty.
How long do French storm doors last?
Quality aluminum or clad units usually last 20 to 30 years with basic maintenance. Closers, sweeps, and weatherstripping need replacing sooner.
Can I install a double storm door myself?
An experienced DIYer with a helper can do it in about half a day. Aligning the two panels is the trickiest part, so hire a pro if the opening is out of square.
Can a regular single storm door be installed on French doors?
Usually not. Standard single storm doors are made for openings about 30 to 36 inches wide, while French door openings typically run 60 to 72 inches, so a single unit cannot cover the full width. A double French storm door, or a custom unit for unusual sizes, is the correct fit. Some homes add a single storm door only where one French panel is the daily entry, but that requires reframing the opening.
Can you put a storm door on outswing French doors?
No. A storm door mounts on the exterior trim and swings outward, so it only works when the primary French doors swing inward. Outswing French doors would hit the storm panels. For outswing doors, the usual options are retractable roll-up screens mounted inside the opening, or upgrading the primary doors with better glass and weatherstripping instead of adding a storm layer.
What are the alternatives to French storm doors for adding screens?
Retractable screen doors are the most common alternative. They roll into slim housings on the sides of the opening and disappear when not in use, so they keep the look of the French doors intact. Hinged double screen doors are a lighter, cheaper option for summer airflow but add no winter insulation. Some patio door makers also offer factory-matched screen systems for their own French doors.
Are French storm doors hurricane rated?
Standard French storm doors are generally not hurricane rated and should not be treated as storm protection in high-wind zones. Homes in hurricane areas usually need impact-rated French doors, or approved shutters or panels, that meet local building code. Check the product label and code requirements, and use a licensed installer when an impact-rated door is required for permits or insurance.