Walk into any paint store on a Saturday and you will see the same scene: a homeowner staring at a fan deck, calculating square footage on a phone, and ending up with either two leftover gallons or a half-finished accent wall. Figuring out how much paint to buy is not complicated, but it does require honest math about surface area, coats, and the texture you are covering. Get the estimate right and you save the back-and-forth trips, the color mismatch headaches, and the $35-$70 per gallon you do not need to spend.
Part of our Paint & Walls guide — explore the full guide →
The Standard Coverage Rule
One gallon of latex paint covers roughly 350-400 square feet on a single coat over a smooth, primed surface. That is the manufacturer’s number on a clean substrate with no surprises. In real life, expect closer to 300-350 sq ft per gallon when you account for cutting in around trim, rolling textured drywall, or painting over a darker color that demands a second coat.
For ceilings, plan on the lower end of that range, around 300 sq ft per gallon, because flat ceiling paint is thicker and you tend to overlap rolling paths to avoid lap marks.
Calculating Wall Square Footage
The formula is the same whether you are painting a powder room or a great room. Measure the perimeter (add up the length of every wall), multiply by the ceiling height, and subtract the openings.
- Perimeter x ceiling height = gross wall area
- Subtract 20 sq ft per standard door
- Subtract 15 sq ft per standard window
- Divide net wall area by 350 = gallons needed for one coat
A 12 x 14 ft bedroom with 9 ft ceilings, one door, and two windows works out to (52 x 9) – 20 – 30 = 418 sq ft. One coat needs about 1.2 gallons, so you buy two gallons for two coats and have a touch-up reserve.
Two Coats Is the Default, Not the Exception
Almost every interior repaint needs two coats to look professional. Even premium paints like Benjamin Moore Aura and Sherwin-Williams Emerald, which advertise one-coat coverage, only deliver that on a similar base color and a primed wall. Going from white to a saturated color, or any color over a stained surface, demands two coats and sometimes a tinted primer.
A useful rule: double your single-coat gallon estimate, then round up. If the math says 1.4 gallons, you buy three quarts or two gallons. Returning unopened paint is generally easy at the major chains within 30 days with the receipt.
Trim, Doors, and Ceilings
Trim coverage is fussy because of the small surface area but high cut-in time. A quart of trim paint typically covers 100 linear feet of standard 3.25-inch baseboard for two coats, or one average interior door (both sides) plus the casing. For an entire 1,500 sq ft house repaint, plan on 2-3 gallons of trim and door enamel, usually a waterborne alkyd like Sherwin-Williams Emerald Urethane Trim Enamel or Benjamin Moore Advance.
Ceilings in the same 12 x 14 room equal 168 sq ft, well under one gallon for two coats. Buy a single gallon of dedicated ceiling paint and you will have leftover for the next project.
Exterior Paint Math Is Different
Exteriors guzzle more paint than interiors. Rough siding, stucco, and brick can drop coverage to 200-250 sq ft per gallon on the first coat. Calculate the wall area the same way, then add 10 percent for waste and overlap. For a 2,000 sq ft two-story with average windows and doors, the gross paintable area is around 2,400 sq ft. That works out to roughly 12 gallons for two coats on smooth lap siding, or 14-16 gallons on stucco or hardboard.
Buy all the gallons in the same lot if possible. Boxed mixing (combining gallons in a 5-gallon bucket before painting) eliminates batch-to-batch color shift, which is more visible on exteriors than interiors.
Specialty Surfaces Eat More Paint
Textured drywall (knockdown, orange peel, popcorn) reduces coverage by 10-20 percent. Raw drywall absorbs the first coat almost entirely and is why a tinted primer like Zinsser Bulls Eye 1-2-3 saves you a topcoat. Fresh joint compound can act like a sponge; spot-prime with PVA primer before you start. Cabinets need 1.5-2 quarts per linear foot of upper-and-lower run for a full primer-plus-two-coat scheme using a self-leveling enamel.
Concrete floors and decks have their own math: 1 gallon covers about 200 sq ft of concrete per coat, and you almost always need two coats plus a clear sealer.
Pro Tips That Save Gallons and Hours
Buy a slightly bigger size than you think you need. Two gallons is cheaper per square foot than three quarts. A 5-gallon bucket runs about 15 percent less than five gallons individually and saves time switching containers. Save the labels and the formula stickers for future touch-ups; the chain stores can re-mix from the formula card years later. Store leftover paint upside down with a tight lid and write the room name and date on the can with a Sharpie.
Knowing exactly how much paint to order is the difference between a smooth weekend project and a four-trip ordeal. Measure twice, calculate for two coats, and add a quart for touch-ups. The extra 15 minutes at the kitchen table will pay back every time.
Quick Reference: Paint Estimates by Room
For homeowners who want shortcuts before doing full perimeter math, these rules of thumb work for standard 8-9 ft ceilings:
- Powder room or small bath: 1 gallon walls + 1 quart trim
- Standard bedroom (12 x 12 ft): 2 gallons walls + 1 quart ceiling
- Master bedroom (14 x 18 ft): 3 gallons walls + 1 gallon ceiling
- Kitchen (excluding cabinet area): 2 gallons walls + 1 quart ceiling
- Living room (16 x 20 ft): 3 gallons walls + 1 gallon ceiling
- Standard garage (2-car): 5-6 gallons for walls and ceiling combined
- Whole-home interior repaint (1,800 sq ft): 12-15 gallons walls, 4 gallons ceiling, 3 gallons trim
Always round up. A homeowner who buys 12 gallons and uses 11 has one gallon for the inevitable touch-up. A homeowner who buys exactly what the calculator says runs out at 10:30 PM with one wall left to finish.