Home Improvement

Sherwin-Williams Naval: Navy Paint Color Guide

Sherwin-Williams Naval: Navy Paint Color Guide

Navy is one of the few dark colors that reads as classic rather than trendy, and Sherwin Williams Naval is one of the most widely used navies on the market. Its code is SW 6244, and Sherwin-Williams named it the 2020 Color of the Year, which put it on kitchen islands, front doors and accent walls across the country. It is a deep, slightly muted blue that can look almost black at night and clearly blue in daylight.

Because Naval is so dark, it behaves differently from the mid-tone colors most people are used to. It absorbs light, shows lap marks if rolled carelessly, and needs the right sheen and primer to cover evenly. This single-color guide covers its light reflectance, undertone, the rooms and surfaces where it works, pairing ideas for cabinets and exteriors, and the prep steps that make a dark color look professional.

Sherwin Williams Naval at a Glance

Sherwin-Williams lists Naval in its blue color family. Third-party color databases consistently report its light reflectance value (LRV) at about 4 on the 0 to 100 scale, where 0 is pure black. The maker’s own color page did not display the LRV when checked, so confirm the current number on the official color detail page or the back of a color card before you rely on it for a lighting plan.

Spec Value What it means
Color number SW 6244 Use this code when ordering or matching
Color family Blue (navy) A true navy, not a teal or purple-blue
LRV About 4 (verify on the maker’s chip) Very dark; reflects little light
Undertone Cool, slightly grayed blue Looks calm and muted rather than bright
Recognition 2020 Color of the Year Widely photographed, easy to visualize
Best uses Accent walls, cabinets, islands, doors, exterior trim and siding accents Works best with contrast nearby
Suggested sheens Flat or matte walls; satin or semi-gloss trim, doors and cabinets Higher sheen shows flaws but cleans easier

Undertone and How Naval Changes With Light

Naval’s undertone is cool, with enough gray in it to keep the blue from looking electric. In north-facing rooms, which get cool, indirect light, it reads as a deep, moody blue that can verge on charcoal. South and west-facing rooms pull out more of the blue, especially in afternoon sun. Under warm white LED bulbs (around 2700K), it looks richer and slightly softer; under cooler daylight bulbs (5000K), it reads crisper and bluer.

Always test with a large sample. Paint two coats on a poster board at least 12 by 12 inches, or use paint sample cards, and move them around the room at different times of day. Dark colors change more dramatically than light ones, so a tiny chip can be misleading.

Where Naval Works Best

Kitchen Cabinets and Islands

A navy island against white or light wood perimeter cabinets is one of the most popular uses for this color. It anchors the room without darkening it. Full navy kitchens can work in large, bright spaces with light counters and plenty of under-cabinet lighting.

Accent Walls and Bedrooms

Naval suits a headboard wall, a dining room or a home office. Because it absorbs light, it makes walls appear to recede, which can make a room feel cozy rather than cramped when paired with light ceilings and trim.

Bathrooms and Vanities

A navy vanity with brass or gold hardware is a classic combination. Use a paint rated for cabinets or a durable enamel, since vanities get splashed and scrubbed.

Exteriors and Front Doors

On exteriors, Naval works as a front door, shutters, or a full siding color for homes with white trim. Dark exterior colors absorb more heat, so check whether your siding maker approves dark colors on vinyl, which can warp under heat buildup. Wood, fiber cement and masonry handle dark paint better.

Pairing Ideas for Cabinets and Exteriors

The pairings here are general color directions rather than official coordinating colors. Check the maker’s current coordinating suggestions on the Naval color page and test any combination with real samples.

Application Pair Naval with Effect
Kitchen island Soft white perimeter cabinets, white quartz, brass hardware Classic, high contrast
Full kitchen cabinets Warm wood open shelves, light counters, matte black or brass pulls Rich and grounded
Bathroom vanity White marble-look top, warm white walls, gold fixtures Clean, hotel-style
Exterior siding Bright white trim, natural wood door or stained porch ceiling Crisp coastal or modern farmhouse
Front door White or light gray siding, black or brass hardware Strong focal point
Accent wall Warm greige adjacent walls, light oak floors Balanced, not cold

For flooring, Naval looks strong next to light and mid-tone oak, warm walnut and pale gray tile. Very dark espresso floors with navy walls can make a room feel heavy unless you add a light rug and plenty of lighting.

Looking to buy Sherwin-Williams Naval? Compare top-rated options.
Shop on Amazon →Browse Our Shop
As an Amazon Associate we earn from qualifying purchases.

Naval sits in a crowded field of navies, and the differences come down to undertone and depth. Compared with brighter, more saturated navies, Naval looks quieter and more grown up because of its gray content. Compared with blue-blacks, it still reads as obviously blue in daylight, which keeps a room from feeling like a cave. Next to navies with a green or teal lean, Naval looks cleaner and more traditional.

If Naval feels too dark for a space, the usual move is to step up to a mid-depth blue in the same cool family for walls and keep Naval for an island, door or trim accent. If it feels too blue, a navy with more black in it will push the look toward charcoal. Either way, compare samples side by side on the same wall, since navies that look identical on a fan deck can look very different at full scale.

One practical tip for anyone choosing sherwin williams naval for a small room: paint the ceiling a soft white and keep trim bright. That contrast frames the color and stops the walls from closing in. In a large open room, carry the color to one defined zone, such as a dining area or a fireplace wall, rather than every wall.

How to Paint With a Dark Navy

Tools and Materials

  • Tinted primer (a gray-tinted primer improves coverage of deep colors)
  • Quality 3/8 inch nap roller for smooth walls, angled sash brush
  • Painter’s tape, drop cloths, spackle, sanding sponge
  • Degreaser for kitchen cabinets and a bonding primer for slick surfaces
  • Sample cards or boards for testing
  1. Clean and repair the surface. Dark colors show dents and patches, so sand patches flush.
  2. Prime with a tinted primer, especially over white or a light color. Cabinets need a bonding primer after degreasing and scuff-sanding.
  3. Cut in one wall at a time and roll immediately while the edge is wet, so brush and roller areas blend without halo marks.
  4. Keep a wet edge. Roll top to bottom in sections, and do not go back over areas that have started to dry. Lap marks show more in dark colors.
  5. Apply two full coats. Deep bases often need two coats over primer for uniform color.
  6. Let cabinets cure per the label before heavy use; enamels harden over days, not hours.

Troubleshooting and Costs

  • Streaky or patchy color: uneven film thickness or skipped primer. Add another full coat with a wet edge.
  • Shiny spots on matte walls: touch-ups flash differently. Repaint wall to wall rather than spot touching.
  • Scuffs on low sheen: dark flat paint shows marks. Use a washable matte or eggshell in busy areas.
  • Color looks black: add warm lighting or move Naval to a brighter room or a smaller surface.

A gallon of quality interior paint typically costs in the mid range for premium lines, and a standard bedroom needs about two gallons for two coats plus primer. Professional painters usually charge per room or per square foot, and cabinet painting is priced higher because of the prep and number of surfaces. Exterior work costs more for height and prep.

When to Call a Pro

Hire a painter for full kitchen cabinets, exterior siding, or two-story walls. Dark colors on large surfaces are unforgiving, and cabinets need careful degreasing and spraying for a factory look. For exterior work above the first floor, use proper ladder safety or let a crew with scaffolding handle it. For an accent wall, a front door or a vanity, though, Sherwin Williams Naval is a manageable DIY color with good primer and patience.

Frequently Asked Questions

What is the LRV of Sherwin-Williams Naval?

Color databases list it at about 4, which is very dark. Confirm the current value on the maker’s official color page or the color card before relying on it.

Does Naval look black?

In low light or north-facing rooms it can look nearly black. In daylight and under warm bulbs it reads as a clear, deep navy.

Is Naval a warm or cool navy?

It is a cool navy with a slightly grayed, muted character, so it pairs well with both warm woods and crisp whites.

What sheen should I use for Naval cabinets?

Satin or semi-gloss in a cabinet-grade enamel gives durability and easy cleaning. Higher sheen shows surface flaws, so prep carefully.

Can I use Naval on an exterior?

Yes, on front doors, shutters and siding. Check your siding maker’s guidance on dark colors, especially for vinyl, which can warp from heat buildup.