Very dark paint colors are where undertones matter most, because a near-black blue can look navy, teal, charcoal or almost black depending on the room. Sherwin Williams Dark Night (SW 6237) is a deep, inky blue with a distinct green-teal lean. The manufacturer’s color page lists its light reflectance value (LRV) at 3.6 and places it in the blue color family, and its RGB mix (35, 56, 63) shows green running close behind blue, which is where that subtle blue-green character comes from.
On walls, cabinets and front doors, Dark Night reads as a moody, sophisticated deep blue in most light, and as a dark teal or blue-green when sun hits it. In dim rooms it can look nearly black. It is rated for interior and exterior use, and it has become a popular choice for kitchen islands, built-ins, studies, powder rooms and exterior doors and shutters.
Its specs, how blue versus green it really reads, where it works best, which colors pair with it and how it compares with nearby deep shades all decide whether it fits your project.
Sherwin Williams Dark Night Specs and Undertones
The values come from the Sherwin-Williams color page for SW 6237. LRV runs from 0 (black) to 100 (white), so 3.6 means Dark Night absorbs almost all the light that hits it. Few colors outside the true blacks sit this low.
| Spec | Value | What it means |
|---|---|---|
| Color number | SW 6237 | Order by number for the exact formula in any sheen |
| LRV | 3.6 | Very dark; near-black in low light |
| Color family | Blue | Officially a blue, with a teal-green lean |
| Undertone | Blue-green (teal) | Greener in warm sun, bluer in cool light |
| Hex / RGB | #23383F / 35, 56, 63 | Green close to blue, little red: a cool, teal-leaning dark |
| Use | Interior and exterior | Walls, cabinets, doors, shutters, trim |
| Typical sheens | Matte walls, satin or semi-gloss cabinets and doors | Higher sheen shows more color and more flaws |
Sheen options depend on the product line, so check the current data sheet, especially for cabinet and door enamels.
Blue or green?
Sherwin-Williams files Dark Night as a blue, and in most rooms that is how it reads: a deep, slightly smoky blue. What sets it apart from a classic navy is the green component. Next to a purple-leaning navy, Dark Night looks noticeably teal. Next to a true dark green, it looks clearly blue. That middle position is why it is often described as a blue-green and why it pairs so easily with both warm woods and cool whites.
How light changes it
- North light: cool and very dark; reads as deep blue verging on black.
- South light: warm sun reveals the teal and green, making it richer and more colorful.
- Evening and lamplight: warm bulbs pull out the green; in a dim room it can look almost black.
- Exteriors in full sun: appears lighter and more obviously blue-teal than inside.
Best Uses: Cabinets, Walls and Exteriors
Kitchen cabinets and islands
Dark Night is a strong choice for an island or lower cabinets with white or light upper cabinets. It looks especially good with brass or champagne bronze hardware, white or warm-veined quartz, and white oak floors. A full kitchen in Dark Night works best with good natural light and plenty of under-cabinet lighting, since the color absorbs so much light.
Built-ins, libraries and offices
Bookshelves, paneling and built-ins painted in Dark Night feel rich and enveloping. Painting walls, trim and ceiling in the same color (color drenching) makes a small office or den feel deliberate and cozy rather than cramped.
Bedrooms and powder rooms
Dark colors are well suited to bedrooms and small powder rooms where the goal is atmosphere, not brightness. Pair with crisp white bedding or a white vanity for contrast.
Front doors, shutters and exteriors
On a white, cream or light gray house, a Dark Night front door or shutters gives depth without the starkness of black. As a full body color on siding, it makes a dramatic statement, best balanced with white trim. Very dark exterior colors absorb heat, so check with your siding manufacturer whether dark colors are approved for vinyl or certain composite products.
Coordinating Colors and Pairings
The SW 6237 page lists several coordinating colors, which make a balanced palette:
- Rock Candy (SW 6231): a very light, cool white-gray (LRV about 74.6) for walls next to Dark Night cabinets or as trim.
- Gossamer Veil (SW 9165): a soft light gray neutral (LRV about 61.8) for adjoining rooms when you want gentler contrast than a white.
- Studio Clay (SW 9172): a medium warm neutral (LRV about 27.1), useful for a secondary accent or exterior trim.
Other pairing ideas: crisp whites on trim and ceilings, warm wood (white oak, walnut), cognac leather, brass and gold metals, terracotta, blush and rust textiles, and white marble-look surfaces. Avoid pairing with a competing navy or teal of similar depth on adjacent walls, which can look like a mismatch.
Dark Night vs Naval, Cyberspace and Tricorn Black
These are the deep shades Dark Night is most often compared with. All LRVs are from the Sherwin-Williams color pages.
| Color | LRV | Character | How it compares |
|---|---|---|---|
| Dark Night (SW 6237) | 3.6 | Deep blue with a teal-green lean | The most blue-green of the group |
| Naval (SW 6244) | 4.5 | Classic deep navy | Slightly lighter, more traditional blue, less green |
| Cyberspace (SW 7076) | 6.4 | Charcoal with a blue cast | Reads more gray; less color than Dark Night |
| Tricorn Black (SW 6258) | 2.8 | Near-neutral black | Darker and with no visible blue or green |
Among deep blues, Sherwin Williams Dark Night stands out for that green lean, which is why it is often grouped with blue-greens in color roundups. Choose Dark Night if you want a deep blue that leans teal and feels a little more unexpected than navy. Choose Naval for a classic, unmistakable navy. Choose Cyberspace if you want a soft, blue-tinged charcoal that behaves more like a neutral. Choose Tricorn Black when you want true black with no color shift.
How to Test and Apply Dark Night
Dark colors are less forgiving than light ones in both color and technique. Peel-and-stick paint sample swatches make testing easy because you can move them from the island to the walls to the front door.
- Test large. Use big peel-and-stick swatches or a sample board. On dark colors, small chips hide the undertone.
- Compare in daylight and lamplight. Check whether it looks too green in warm light or too black in a dim corner.
- Use a tinted primer. A gray-tinted primer helps deep colors cover in fewer coats, especially over white or light walls.
- Plan for two to three coats. Deep base colors often need more coats for full, even color.
- Keep a wet edge. Lap marks and flashing show more on dark colors; roll full wall sections without stopping midway.
- Cabinets and doors: clean with a degreaser, scuff sand, prime with a bonding primer, then apply thin coats of a cabinet or door enamel.
Use a quality roller cover (3/8-inch nap for smooth walls), a good angled brush and plenty of light while working, since missed spots are hard to see in a dark color. Ventilate the room throughout.
Troubleshooting Dark Night
Streaks or flashing. Uneven sheen happens with dark colors when touch-ups or patched spots absorb paint differently. Prime patches, keep a wet edge and repaint entire wall sections instead of spot-touching.
It looks black. The room needs more light. Add lamps or warmer bulbs, or limit Dark Night to cabinets or one wall.
It looks too teal. Warm light and warm wood bring out the green. Cooler bulbs or a switch to Naval will read bluer.
Scuffs on cabinets. Matte and flat finishes show marks on high-touch surfaces. Use satin or semi-gloss enamel on cabinets, doors and trim.
Fading outdoors. Deep colors on sunny walls fade faster over the years. Use an exterior line with good fade resistance and plan for periodic touch-ups.
Cost and When to Hire a Pro
Sherwin Williams Dark Night is not priced differently from lighter colors in the same product line; deep colors generally cost about the same per gallon, but you may need an extra coat, plus tinted primer. A typical room uses two to three gallons; a front door needs well under a gallon. Supplies for a DIY job usually add a modest amount on top of the paint.
Professional painting is commonly priced by the square foot for walls and by the door or drawer front for cabinets. Cabinet painting is the most labor-intensive job and the one most worth handing to a pro, since a spray-applied finish in a dark color looks smoothest. Exteriors over one story also call for a pro with proper ladders or scaffolding. In homes built before 1978, test old paint for lead before sanding or scraping. Confirm the current color details on the manufacturer’s color page before you order.
Frequently Asked Questions
Is Dark Night blue or green?
Sherwin-Williams classifies Dark Night (SW 6237) as a blue. Its green component is strong enough to give it a teal lean, so it reads blue-green in warm light and deep blue in cool light.
What is the LRV of Dark Night?
The manufacturer lists an LRV of 3.6, which makes it a very dark color that can look nearly black in rooms with little light.
Is Dark Night good for kitchen cabinets?
Yes. It is especially popular on islands and lower cabinets with white uppers, brass hardware and light countertops. Use a satin or semi-gloss cabinet enamel for durability.
Is Dark Night darker than Naval?
Slightly. Dark Night has an LRV of about 3.6 versus about 4.5 for Naval, and Dark Night leans more teal while Naval reads as a traditional navy.
Can Dark Night be used on a front door?
Yes. It is rated for interior and exterior use and makes a rich front door color on white, cream or light gray houses. Use an exterior door enamel for durability.