The name suggests a near-black navy, but Inky Blue Sherwin Williams (SW 9149) is actually a muted, medium-dark blue with a soft gray cast. On the manufacturer’s color data it carries a light reflectance value (LRV) of about 15, which puts it well above true navies such as Naval and In the Navy. That gap surprises many people who order a sample expecting something dramatic and get a dusty, denim-like blue instead.
Used with that in mind, it is a very livable color. It is moody enough for an accent wall, cabinets or a front door, yet light enough to work on full walls in a well-lit room without turning the space into a cave. Sherwin-Williams lists it for both interior and exterior use and places it in its blue color family.
Inky Blue Sherwin Williams Specs at a Glance
These values come from Sherwin-Williams’ own color data. Paint makers occasionally update their digital values, so confirm against the current color page or a physical sample before ordering large quantities.
| Spec | Value | What it means |
|---|---|---|
| Color number | SW 9149 | The code to give the paint counter for an exact match |
| LRV | About 15 | Medium-dark: reflects roughly 15 percent of light, so it reads deep but not black |
| Hex value | #4E7287 | Useful for digital mockups only; screens never show paint exactly |
| Color family | Blue | A muted, grayed blue rather than a bright or saturated one |
| Undertone | Gray with a slight green-teal lean (Sherwin-Williams cites yellow undertones) | Can look slate or denim in north light, cleaner blue in warm light |
| Interior/exterior | Both | Available for walls, trim, cabinets, doors and siding |
| Coordinating colors listed | Natural Linen (SW 9109), Cocoa Whip (SW 9084), Icicle (SW 6238) | A light warm beige, a soft brown and a very pale cool violet |
| Best sheens | Eggshell or matte for walls; satin or semi-gloss for trim, doors and cabinets | Higher sheens deepen and enrich blues but show surface flaws |
Understanding the Undertones
Inky Blue is a “diluted” blue, meaning a good dose of gray softens its saturation. Its color data also shows a mild green component, which is why some people describe it as slightly teal or stormy in certain light. It never reads purple.
Light direction changes it noticeably:
- North-facing rooms: cool, gray-blue light pushes it toward slate. It can feel heavier here, so pair it with warm whites and wood tones.
- South-facing rooms: warm daylight brings out a cleaner, brighter blue that reads closer to faded denim.
- East and west: it shifts through the day, looking brighter when the sun is on that side and grayer when it is not.
- Warm LED bulbs (2700K to 3000K): soften the coolness and make it feel cozy at night.
Test a large sample, ideally at least 12 by 12 inches, on two walls and look at it morning, afternoon and evening before you commit.
Best Uses and Rooms
Cabinets and kitchen islands
Inky Blue is a strong choice for lower cabinets or an island paired with white or light uppers. Its gray softness keeps it from feeling nautical, and brass or warm bronze hardware looks especially good against it.
Bedrooms and offices
On full walls in a room with decent light, it creates a calm, enveloping feel. Pair it with natural linen bedding, light oak and soft white trim.
Bathrooms and powder rooms
Small rooms tolerate deeper color well. Use a moisture-resistant bath paint in a satin or similar sheen so it wipes clean.
Front doors and exterior accents
On a door or shutters, it reads as a friendly mid-blue against white, cream or light gray siding. Outside, strong sun makes it look lighter than indoors, so check it on the actual door.
Accent walls
Behind a bed, a sofa or built-in shelving, it adds depth without the heaviness of a navy.
Coordinating Colors and Pairings
The maker’s own coordinating suggestions, Natural Linen, Cocoa Whip and Icicle, point to a balanced palette: a light warm beige, a soft earthy brown and a very pale, cool violet. Beyond those, these pairing directions work well:
- Trim: a clean white with little yellow keeps the blue crisp; a creamy white makes it feel softer and more traditional.
- Adjacent rooms: warm grays and greiges in the 50 to 65 LRV range bridge Inky Blue into open spaces.
- Accent colors: terracotta, rust, ochre and blush complement it; deep green creates a moody, layered look.
- Materials: white oak, walnut, brass, unlacquered bronze, white marble and natural linen all sit comfortably beside it.
Inky Blue vs Naval, In the Navy and Indigo Batik
The quickest way to understand Inky Blue is to see where it sits among the blues people usually compare it with. All values are from Sherwin-Williams’ color data.
| Color | Code | Approx. LRV | How it differs from Inky Blue |
|---|---|---|---|
| Inky Blue | SW 9149 | 15 | Muted mid-dark blue with gray and a slight teal lean |
| Indigo Batik | SW 7602 | 8 | Noticeably darker; Sherwin-Williams calls it a dark, saturated denim blue |
| Naval | SW 6244 | 4 | A true deep navy, much darker; reads near black at night |
| In the Navy | SW 9178 | 4 | Similar depth to Naval with a slightly softer, grayer feel |
Choose Inky Blue when you want blue that still reads as blue on a full wall. Choose Indigo Batik for more depth in a saturated, denim-like blue. Pick Naval or In the Navy when you want a classic navy that behaves almost like a neutral dark.
Painting Tips for a Rich, Even Finish
- Prime with a gray-tinted primer when covering a light color or bare drywall. Tinted primer helps mid-dark blues cover in two coats.
- Use a quality paint roller kit with a 3/8-inch nap for smooth walls or a 1/2-inch nap for light texture, plus a good angled brush for cutting in.
- Keep a wet edge and roll full wall heights in one pass to avoid lap marks, which show more on deep colors.
- Box your paint: mix all gallons together in a larger bucket so batches match.
- Allow full dry time between coats, and longer cure time before scrubbing or hanging art.
Typical paint cost for a 12 by 12 foot bedroom is a couple of gallons of wall paint plus primer, usually somewhere in the range of under a hundred to a few hundred dollars depending on product line. Hiring a painter for a single room commonly runs a few hundred dollars or more.
Is Inky Blue Right for Your Space?
Inky Blue Sherwin Williams makes the most sense when you want a blue that clearly reads as blue on a full wall but feels softer and more relaxed than a crisp primary or a heavy navy. It shines in rooms with medium to good natural light, in homes with warm wood floors and in spaces filled with natural textures such as linen, jute and leather. Families who like a coastal or cottage feel without going nautical often land on it for that reason.
It is less suited to very dark, windowless rooms, where its gray component can make it feel flat, or to spaces with lots of cool gray tile and stainless steel, where the whole palette can tip cold. In those cases, warm it up with creamy trim, brass and wood, or consider a slightly cleaner blue.
A simple test helps: paint two large sample boards, place one beside your flooring and one beside your trim or cabinets, and live with them for a few days. If the color still feels calm at night under your normal bulbs, Inky Blue Sherwin Williams is likely a good fit. If it looks muddy, step to a lighter or cleaner blue in the same family.
Keep in mind that sheen changes the result too. A matte wall softens the blue and hides minor wall flaws, while a satin or semi-gloss finish on cabinets makes the same color look richer and slightly darker.
Troubleshooting
It looks grayer than expected
That is its nature in cool light. Warmer bulbs, warm whites on trim and wood accents bring out more blue.
Patchy or streaky walls
Mid-dark colors reveal uneven application. Add a third thin coat, keep a wet edge and avoid touching up small spots after drying, which often flash.
Too dark for the room
Ask the store to mix it at a reduced strength, or move to a lighter blue in the same family and keep Inky Blue for cabinets or a single wall.
Frequently Asked Questions
Is Inky Blue by Sherwin-Williams a navy?
No. With an LRV of about 15 it is a muted medium-dark blue. True navies such as Naval and In the Navy sit around 4.
What is the LRV of Sherwin-Williams Inky Blue?
Sherwin-Williams’ color data lists it at about 15, which means it reflects roughly 15 percent of the light that hits it.
What undertones does Inky Blue have?
It is a grayed blue with a slight green or teal lean. It looks slate in north light and cleaner blue in warm light.
What white trim goes with Inky Blue?
Icicle, a very pale violet with a blue undertone, is one of the maker’s own coordinating colors. Clean whites keep it crisp, while creamier whites soften it.
Can Inky Blue be used on exterior doors?
Yes. Sherwin-Williams lists it for both interior and exterior use. Use an exterior-rated paint in satin or semi-gloss for doors.