Home Improvement

Simpson Pressure Washer Parts: A Repair and Replacement Guide

Simpson Pressure Washer Parts: A Repair and Replacement Guide
Disclosure: This post may contain affiliate links. We may earn a small commission if you purchase through our links, at no extra cost to you. Learn more.

Simpson is one of the most trusted names in gas pressure washers, and part of that reputation comes from how repairable the machines are. Knowing your Simpson pressure washer parts means you can swap a worn nozzle, rebuild a leaking pump, or replace a cracked hose instead of buying a whole new unit. This guide breaks down every major component, what tends to fail, and how to source the right replacement.

Understanding the Simpson Lineup

Simpson builds several popular series, including the MegaShot, PowerShot, and CLEAN MACHINE lines, powered by engines from Honda, Kohler, and Simpson’s own brand. Pressure ratings commonly range from about 2,800 to 4,400 PSI. Because these are modular machines, most parts are interchangeable within a series and often across models that share the same pump or engine. Always match parts to your exact model number, printed on the frame label, before ordering.

Outdoor Power Equipment on Amazon

  • Battery & gas lawn mowers
  • Pressure washers & nozzles
  • Leaf & snow blowers
  • String trimmers & chainsaws
  • Mower oil & parts

Shop Outdoor Power Equipment on Amazon →

As an Amazon Associate, we earn from qualifying purchases.

The Pump: Heart of the Machine

The pump generates the pressure, and it is the most important part to understand. Simpson uses axial cam pumps on consumer models and triplex plunger pumps on premium units. Axial pumps are affordable but generally not rebuildable; when they fail, you replace the whole pump for roughly $80 to $150. Triplex pumps cost more upfront but can be rebuilt with seal kits and valves, making them the better long-term choice for heavy users. Low pressure, pulsing, or water in the oil usually points to pump wear.

Nozzles and Spray Tips

Quick-connect nozzles are the cheapest and most frequently replaced parts. Each color sets a spray angle for a different job:

  • Red (0 degrees): a pinpoint jet for the toughest, most stubborn stains.
  • Yellow (15 degrees): heavy-duty stripping and prep work.
  • Green (25 degrees): general washing of decks, siding, and vehicles.
  • White (40 degrees): gentle cleaning of windows and delicate surfaces.
  • Black (soap): low-pressure tip that draws detergent.

Nozzles wear out as the orifice erodes, causing weak or uneven spray. A five-pack costs around $10 to $20, so keep spares on hand.

Hoses and Fittings

High-pressure hoses take a beating and are a common failure point. Simpson offers MorFlex non-marking hoses in various lengths and pressure ratings. A cracked, bulging, or leaking hose should be replaced immediately, since a burst under pressure is dangerous. Match the replacement to your machine’s PSI rating and connection type, usually M22 or a quick-connect coupler. Replacement hoses run about $30 to $70 depending on length and rating.

The Spray Gun and Wand

The trigger gun and lance are what you hold and control. Over time, the trigger’s internal seals wear and the gun starts leaking or fails to shut off water flow when released. Most guns are a straightforward swap using the same fittings, costing roughly $25 to $50. Extension wands and specialty lances, like telescoping poles or under-car kits, attach to the same connection and expand what the machine can do.

The Unloader Valve

The unloader valve is a critical but often overlooked part. It diverts water back into the pump when you release the trigger, protecting the system from over-pressurizing. A faulty unloader causes pressure spikes, the gun to feel like it’s fighting you, or pressure that won’t build at all. Some are adjustable and can be tuned; others are replaced as a unit for about $30 to $60. If your washer pulses hard or trips when you let go of the trigger, suspect the unloader.

Chemical Injectors and Detergent Systems

Many Simpson models draw soap through a downstream injector, a small check-valve assembly in the line. If detergent stops flowing, the injector’s ball or spring is often clogged or worn. These inexpensive parts, usually under $20, are easy to clean or replace. Always flush the detergent system with clean water after use to prevent buildup that shortens injector life.

Seals, O-Rings, and Repair Kits

The smallest parts cause many of the leaks. O-rings at every connection dry out and crack, letting water seep from couplers and the wand. Simpson and pump makers sell O-ring assortment kits and pump seal kits for a few dollars. For triplex pumps, a full rebuild kit with plunger seals, valves, and O-rings restores performance for a fraction of a new pump’s cost. Keeping a small kit on hand fixes most minor leaks in minutes.

Engine Components

The gas engine has its own wear parts, shared with any small engine: spark plugs, air filters, carburetors, recoil starters, and fuel lines. Since Simpson uses Honda, Kohler, and its own engines, source these parts by the engine brand and model rather than the washer model. Routine engine care, fresh oil, clean filters, and stabilized fuel, prevents the majority of no-start problems.

How to Find the Right Part

  1. Locate your model and serial number on the frame or engine label.
  2. Download the parts diagram or owner’s manual from Simpson’s website.
  3. Identify the failed component by its part number in the exploded diagram.
  4. Order from Simpson directly or an authorized dealer to guarantee a fit.
  5. Cross-check pump and engine numbers, since those parts come from their makers.

Common Repairs and Costs

  • Worn nozzle set: $10 to $20, five-minute swap.
  • Leaking spray gun: $25 to $50, tool-free connection.
  • Cracked high-pressure hose: $30 to $70, hand-tighten fittings.
  • Faulty unloader valve: $30 to $60, moderate difficulty.
  • Pump replacement: $80 to $150 for axial units.
  • Pump rebuild kit: $20 to $50 for triplex seals and valves.

Preventive Maintenance Tips

Most part failures are preventable. Use a pump saver or run the pump dry only briefly, never let the machine freeze with water inside, change triplex pump oil per the schedule, and flush the detergent system after each use. Store the unit indoors, keep the water inlet screen clean to protect the pump, and inspect hoses and O-rings before each job. These simple habits dramatically extend the life of every component.

Quick-Connect Couplers and Adapters

The brass and stainless couplers that join the hose, gun, and lance are easy to overlook until they leak or refuse to click home. Most Simpson machines use standard quick-connect plugs and sockets, often paired with M22 threaded fittings at the pump and gun. When a coupler leaks, the internal O-ring is usually the culprit and costs pennies to replace; when it won’t lock, grit in the collar or a bent ball bearing is to blame. Keeping a few spare plugs, sockets, and M22 adapters on the shelf lets you adapt accessories from other brands and swap a failed coupler in seconds rather than replacing an entire hose or gun.

Water Inlet Screen and Filter

A small screen sits at the water inlet where the garden hose connects, and it is one of the cheapest yet most important parts. Its job is to catch sand and grit before they reach the pump, where debris scores the pistons and destroys seals. Clean this screen before every use and replace it if it tears, since a torn screen lets damaging particles straight into the pump. On well water or job sites with silty supply, an inline pre-filter adds an extra layer of protection for a few dollars.

Where to Buy Genuine Parts

You have several sourcing options. Simpson’s own website lists parts and diagrams by model, authorized dealers stock common wear items, and major online retailers carry nozzles, hoses, guns, and pump kits. For engine parts, go through the engine maker, Honda or Kohler, using the engine’s model and serial numbers. Generic aftermarket parts often fit and cost less, but for the pump and unloader, genuine or reputable OEM-equivalent parts are worth the extra few dollars to ensure correct pressure ratings and a proper seal.

When to Repair vs. Replace

A good rule of thumb: repair when the fix costs less than half of a comparable new machine and the engine is still healthy. Nozzles, hoses, guns, unloaders, and injectors are almost always worth replacing. A failed axial pump on an older budget unit may tip the scales toward buying new, while a triplex pump on a premium Simpson is well worth rebuilding.

Understanding your Simpson pressure washer parts turns a broken machine into a quick, affordable fix. Keep a few spares on hand, match replacements to your exact model and engine numbers, and follow basic maintenance, and your Simpson will deliver high-pressure cleaning power for many seasons rather than ending up as scrap.