Ever seen an entertainment center or appliance garage where the doors swing open, then glide completely out of sight into the cabinet? That trick relies on specialized hardware, and Accuride pocket door slides are the industry benchmark for pulling it off smoothly. These slides let a door open like a normal hinged door, then roll straight back into a pocket beside the cabinet interior, freeing the opening entirely. They are the secret behind hidden TV cabinets, office armoires, and kitchen appliance garages. This guide covers how the system works, the key models, weight and sizing, and how to install it.
Part of our Windows & Doors guide — explore the full guide →
What Pocket Door Slides Do
A standard hinged cabinet door, when open, sticks out into the room and blocks access. Pocket door hardware solves that by combining a hinge action with a sliding action. The door first swings open on a pivoting hinge arm, then the whole assembly rolls back on a pair of slides into a slim pocket built into the cabinet side, tucking the door completely away.
This is why the hardware always comes as a matched set of two slides, a left and a right, that work in tandem to carry the door in and out. Accuride’s reputation in this niche comes from smooth, precise ball-bearing action and consistent weight ratings that woodworkers and cabinet shops trust for a reliable glide over years of use.
Popular Accuride Models
Accuride makes several pocket-door series, and choosing the right one depends on door size and weight. Knowing the main options prevents buying underrated hardware.
- Accuride 1234: the classic pocket door slide for lighter, smaller doors on appliance garages and small cabinets.
- Accuride 1332: a heavier-duty pocket system rated for larger doors like entertainment-center panels and armoire doors.
- Accuride CB1332: a version with additional features for demanding applications.
Always match the model to the specific door’s dimensions and weight. Accuride publishes weight ratings and maximum door sizes for each series, and staying within those specs is what keeps the door gliding smoothly rather than sagging or binding.
Weight Ratings and Sizing
Getting the capacity right is the most important spec to nail. Pocket door slides carry the door’s full weight through both the swing and the slide, so an overloaded set will droop and jam. A pair of slides shares the load, but each series has a defined maximum door weight, commonly in the 25 to 75-pound range depending on the model.
Slide length also matters because it determines how deep the door pockets into the cabinet. The door must fully clear the opening and retract into the pocket, so the slide length has to match your cabinet’s interior depth. Measure the depth available inside the cabinet, subtract clearances, and choose a slide length that lets the door disappear completely while leaving room for the mechanism to travel.
Where These Slides Are Used
Pocket door hardware turns up wherever a hidden or out-of-the-way door adds function. The applications share a need to open a door without it protruding.
- Entertainment centers: hide the TV behind doors that vanish when you are watching.
- Kitchen appliance garages: tuck the coffee maker and toaster behind a door that slides away during use.
- Home office armoires: conceal a workstation, then slide the doors back to work without them in the way.
- Media and hobby cabinets: keep doors open and hidden while you access the contents.
How to Install Accuride Pocket Door Slides
Installation demands precision because both slides must be perfectly parallel and level, or the door will bind. Take your time with layout. Here is the general sequence for a matched pair.
- Read the model’s template and instructions carefully; Accuride provides exact mounting dimensions for each series.
- Mark and mount the cabinet-member slides to the interior sides, keeping them dead level and parallel front to back.
- Attach the door brackets and hinge arms to the slides per the template.
- Mount the door to the hinge arms, checking that it swings open and rolls back without rubbing the cabinet.
- Adjust the slides and hinge arms using the provided adjustment points until the door aligns flush when closed and clears fully when pocketed.
The most common install mistake is slides that are not parallel, which causes the door to catch. Measure from a common reference at both the front and back of each slide to confirm they match exactly.
Adjustment and Troubleshooting
Even a careful install often needs fine-tuning, which is normal. Accuride slides include adjustment slots that let you shift the door up, down, in, and out to dial in a flush, even reveal. If the door sags when open, verify you have not exceeded the weight rating and that both slides carry the load evenly.
Binding during travel usually traces back to slides that are out of parallel or a cabinet side that is not square. If the door will not fully pocket, the slide length may be too short for the door’s width, meaning part of the door still blocks the opening. A drop of the manufacturer’s recommended lubricant on the ball-bearing raceways keeps the action smooth if it ever feels gritty.
Buying Tips and Final Thoughts
When shopping, buy the slides as a genuine matched pair from a reputable hardware supplier, and confirm the model number against your door’s size and weight before ordering. Cheaper generic pocket slides exist, but the smoothness and durability that make Accuride the standard are exactly what you are paying for in a mechanism that gets used daily.
Plan the cabinet around the hardware, not the other way around, since the pocket must be sized to swallow the door plus the mechanism. With the correct model, careful parallel mounting, and patient adjustment, Accuride pocket door slides give cabinet doors that clean, disappearing action that makes appliance garages and hidden media cabinets feel genuinely custom.
Planning the Cabinet Opening
Success with pocket door hardware starts long before you screw in the first slide. The cabinet has to be designed to accommodate both the door and the pocket it retracts into, and cramming the hardware into a cabinet built for a plain hinged door rarely works. You need clear interior width for the pocket on the side the door retracts into, plus the depth for the slides to travel their full length.
Account for the door thickness, the mechanism’s own width, and a small running clearance so the door glides without scraping the cabinet interior or its own shelves. Face-frame and frameless cabinets handle pocket doors differently, so match the hardware series to your construction style. Many woodworkers build a full-scale mockup or dry-fit the slides in the open cabinet before final assembly, since it is far easier to correct a clearance issue on the bench than after the cabinet is installed and loaded.
Single Door vs Double Door Setups
Pocket door hardware handles both single doors that slide into one side and pairs of doors that split in the middle and pocket into opposite sides. Double-door setups, common on wide entertainment centers and armoires, use two matched pairs of slides, one set per door, and demand even more careful layout so the two doors meet cleanly in the center when closed.
For a single wide door, confirm the pocket depth can swallow the full door width, because a door too wide for its pocket will leave part of the panel blocking the opening even when fully retracted. For double doors, each leaf only needs to pocket half the total opening, which is one reason wide cabinets often use a pair rather than a single oversized door. Whichever configuration you choose, order the correct number of matched slide sets and verify the weight rating covers each individual door, not the pair combined, since each set carries only its own door.