Most people pick a white paint from a two-inch chip, then wonder why the walls look creamy, gray or flat once the room is finished. Alabaster Sherwin Williams (SW 7008) is one of the most requested whites in the country precisely because it avoids the extremes: it is soft enough to feel warm, yet clean enough to read as white rather than beige. Sherwin-Williams describes it as a balanced white, and its published Light Reflectance Value (LRV) of about 82 puts it in the bright range without the glare of a stark gallery white.
The short answer for anyone deciding today: Alabaster is a warm, slightly creamy off-white with a high LRV, rated for both interior and exterior use. It works best in rooms with neutral to cool daylight, on trim and cabinets next to warm wood floors, and on exteriors where a pure white would look harsh. It can turn noticeably yellow under warm bulbs or in rooms that face strong orange light, so sampling on your own walls matters more than the chip.
- Alabaster Sherwin Williams Specs at a Glance
- Undertones: Why Alabaster Reads Warm
- Alabaster vs Pure White, Snowbound and Greek Villa
- Choosing the Right Sheen for Each Surface
- Trim, Cabinet and Floor Pairings
- How to Test Alabaster Before You Commit
- Troubleshooting Common Alabaster Complaints
- General Cost to Paint with Alabaster
- When to Call a Pro
- Frequently Asked Questions
Alabaster Sherwin Williams Specs at a Glance
These figures come from the manufacturer’s own color page for SW 7008. Paint makers occasionally update their data, so confirm on the current color page or fan deck before you order a large quantity.
| Spec | Value | What it means |
|---|---|---|
| Color name and code | Alabaster, SW 7008 | Use the code when ordering so the store mixes the right formula |
| LRV | About 82 (listed as 82.215) | Reflects roughly 82% of light; bright but softer than the brightest whites |
| RGB | 237, 234, 224 | Blue sits lowest, which is why the color reads warm and slightly creamy |
| Hex | #EDEAE0 | Handy for digital mockups, though screens never match real paint exactly |
| Color family | White | Grouped with the brand’s white paint colors |
| Fan deck strip location | 255-C2 | Where to find the physical chip in the store color system |
| Use | Interior and exterior | Can be mixed in both interior and exterior product lines |
| Coordinating colors listed | Townhall Tan (SW 7690), Dakota Wheat (SW 9023) | Warm neutrals the maker suggests pairing with it |
An LRV of 82 deserves a quick explanation. The scale runs from 0 (black) to 100 (perfect white). Most whites that people actually live with land somewhere between about 80 and 90. Anything near the top of that band can feel stark in a sunny room, while whites below 80 start to look visibly tinted. Alabaster sits comfortably inside the useful zone, which is a big part of why designers lean on it as a whole-house color.
Undertones: Why Alabaster Reads Warm
Every off-white carries a hint of another color. With Alabaster, the RGB values tell the story: red and green are slightly higher than blue, which nudges the color toward a soft cream with a whisper of yellow. Some people describe it as having a faint greige quality, especially in shade, because the low saturation keeps it from ever looking openly yellow on a large wall.
How you experience that undertone depends heavily on light:
- North-facing rooms: cool, bluish daylight pulls Alabaster toward a soft, slightly gray white. Many people find it reads as the most “white” here, and the warmth stops the room from feeling icy.
- South-facing rooms: strong, warm light amplifies the cream. It still looks white, but it will feel noticeably cozier than a neutral white.
- West-facing rooms: late afternoon sun can tip it toward yellow or peach for a few hours.
- Artificial light: bulbs around 2700K emphasize the warmth; 3000K to 3500K bulbs tend to show it closest to the chip.
Fixed finishes in the room also change the read. Golden oak floors, honey-toned cabinets or beige carpet bounce warm light onto the walls and can make Alabaster look creamier. Gray tile, black hardware and cool stone pull it the other way. If your space has a lot of strongly yellow material, consider a slightly cleaner white instead.
Alabaster vs Pure White, Snowbound and Greek Villa
These four whites come up together in almost every paint decision, and the differences are subtle on a chip but obvious on a wall. LRVs here come from each color’s manufacturer page, rounded to the nearest whole number.
| Color | Code | LRV | How it reads next to Alabaster |
|---|---|---|---|
| Alabaster | SW 7008 | 82 | Soft, warm, slightly creamy white |
| Pure White | SW 7005 | 84 | Brighter and more neutral, with only a trace of warmth |
| Snowbound | SW 7004 | 83 | Cleaner and a touch cooler, with a faint gray cast |
| Greek Villa | SW 7551 | 84 | Similar warmth but brighter, with a slightly creamier glow in sun |
Alabaster vs Pure White
Pure White is the safer choice when you want white to look like white without any cream. It is a couple of points brighter and noticeably more neutral. Many people use Pure White on trim and ceilings with Alabaster walls for a gentle, almost invisible contrast, or choose Pure White for modern spaces with gray or black accents.
Alabaster vs Snowbound
Snowbound leans slightly cooler, with a soft gray undertone that some people see as a hint of violet in certain light. In a north-facing room, Snowbound can look chilly where Alabaster stays comfortable. In a hot, sunny room, Snowbound may look cleaner and crisper.
Alabaster vs Greek Villa
Greek Villa is the closest cousin. Both are warm whites, but Greek Villa is brighter on paper and can read a little creamier in direct sun. If Alabaster feels too gray in your space, Greek Villa is a logical next sample; if Greek Villa looks too yellow, Alabaster usually calms it down.
Choosing the Right Sheen for Each Surface
The color stays the same across sheens, but the way light bounces off the surface changes how bright and how warm it looks. Higher sheens reflect more light and show surface flaws; lower sheens hide them.
- Ceilings: flat or matte to hide roller marks and minor drywall flaws.
- Living rooms and bedrooms: matte or eggshell for a soft look that still wipes clean.
- Kitchens, bathrooms, hallways and kids’ rooms: eggshell or satin for better scrubbability and moisture resistance.
- Trim, doors and cabinets: satin or semi-gloss. A durable enamel product made for trim and cabinets resists chipping and fingerprints better than wall paint.
- Exterior siding: flat or satin, using an exterior-rated product. Exterior trim usually looks crisper in satin or semi-gloss.
Expect higher sheens to make Alabaster look a shade brighter and slightly cleaner, since glossier surfaces reflect more of the surrounding light. Matte finishes tend to show the warmth more.
Trim, Cabinet and Floor Pairings
Because Alabaster is versatile, it pairs with a wide range of materials. A few combinations work especially well:
All-Alabaster walls and trim
Painting walls and trim the same color, with walls in matte or eggshell and trim in semi-gloss, creates a calm, gallery-like look. The sheen difference alone gives enough definition. This approach suits smaller homes where you want rooms to flow together.
Alabaster walls with a brighter white trim
Using a cleaner white on trim and ceilings sharpens edges and makes the walls look slightly warmer. Keep the contrast gentle; a stark bright white next to Alabaster can make the walls look dingy.
Alabaster cabinets
Alabaster is popular on kitchen cabinets because it softens the clinical look of bright white boxes. It pairs well with warm brass or matte black hardware, white or cream quartz with soft veining, and butcher block. Avoid pairing it with a very blue-white countertop, which can make the cabinets look yellow by comparison.
Floors and accent colors
Mid-tone white oak, natural walnut and warm-gray luxury vinyl plank all work with Alabaster. Very orange red oak can push the walls toward cream, so test samples next to the floor. For accent walls or adjoining rooms, warm greiges, sage greens, muted navy and the maker’s listed coordinates such as Townhall Tan or Dakota Wheat keep the palette cohesive.
Exteriors
On siding, Alabaster reads softer than a pure white and avoids the glare that bright whites can create in full sun. It pairs naturally with black or bronze window frames, natural cedar accents and charcoal or weathered-wood roofing. Outdoors, colors look lighter than indoors, so a warm white often lands as a clean white on a sunny facade.
How to Test Alabaster Before You Commit
- Get a large sample. Peel-and-stick paint sample swatches or a painted sample board give you a far more accurate read than a small chip.
- Place samples on several walls. Put one on the brightest wall and one on the darkest wall in the room, plus one next to trim and flooring.
- Compare against other whites. Hang Alabaster next to one cleaner white and one warmer white so the undertone becomes obvious.
- Check at three times of day. Look in the morning, at midday and in the evening with your normal bulbs on.
- Look against white paper. A plain sheet of printer paper held next to the sample reveals how creamy it really is.
- Live with it for 48 hours. First impressions in white paint are often misleading.
Troubleshooting Common Alabaster Complaints
- “It looks yellow.” Usually caused by warm bulbs, orange-toned floors or strong west light. Try 3000K to 3500K bulbs, or step to a more neutral white.
- “It looks gray or dingy.” Common in dim north-facing rooms. A slightly brighter warm white such as Greek Villa can help, or add warmer lighting.
- “Touch-ups don’t match.” Different sheens or batches can look different. Keep leftover paint labeled with sheen and product line, and touch up whole sections corner to corner.
- “Trim looks off next to the walls.” Existing trim may be a cooler white. Repaint trim in Alabaster at a higher sheen, or choose a trim color with a similar undertone.
- “It looks blotchy.” Patched drywall or bare wood absorbs paint unevenly. Prime patches and raw surfaces before the finish coats.
General Cost to Paint with Alabaster
Alabaster is a standard color mixed into the maker’s regular product lines, so its cost is set by the paint grade rather than the color. As a general guide, a gallon of mid-grade to premium interior paint runs roughly $40 to $90, and one gallon covers about 350 to 400 square feet per coat. Most rooms need two coats over a primed or previously painted surface.
Hiring a painter for an average bedroom commonly runs a few hundred dollars up to around $1,000, depending on ceiling height, trim and prep. Cabinet painting is a separate, more labor-intensive job that often runs from a few thousand dollars upward for a typical kitchen. Exterior repaints vary widely with house size, height and siding condition.
When to Call a Pro
A confident DIYer can handle walls and ceilings. Consider a professional for kitchen cabinets, where a smooth sprayed finish makes a large difference, for two-story exteriors, for homes built before 1978 where older paint layers may contain lead and need testing and lead-safe practices before sanding, and for any project where you want a guaranteed even finish on long, brightly lit walls. A pro can also help you compare Alabaster with neighboring whites using large painted boards in your actual light.
Frequently Asked Questions
Is Alabaster a warm or cool white?
Alabaster is a warm white. Its RGB values put blue lowest, so it reads soft and slightly creamy, especially under warm bulbs or in south and west light.
What is the LRV of Alabaster Sherwin Williams?
The manufacturer lists the LRV of SW 7008 Alabaster at about 82, which places it in the bright range while staying softer than stark whites.
Can Alabaster be used on exterior siding?
Yes. The color is listed for interior and exterior use. Mix it in an exterior-rated product and expect it to look a little lighter outdoors than on the chip.
Is Alabaster good for kitchen cabinets?
It is a popular cabinet color because it looks soft rather than clinical. Use a durable cabinet and trim enamel in satin or semi-gloss for chip resistance.
What white trim goes with Alabaster walls?
Alabaster trim in a higher sheen is the simplest match. A gently cleaner white such as Pure White also works; very stark bright whites can make the walls look dull.
Does Alabaster look yellow?
It can look slightly yellow under very warm bulbs, next to orange wood floors or in strong late afternoon sun. In neutral or cool light it reads as a soft white.