Home Improvement

Anderson Storm Door: A Complete Guide for Homeowners

Anderson Storm Door: A Complete Guide for Homeowners

A storm door does more than most homeowners realize: it protects your expensive entry door from weather, adds a layer of insulation, lets you catch a breeze without bugs, and boosts security. Among the big names, the Anderson storm door — properly spelled Andersen — is one of the most recognized, largely thanks to its innovative retractable-screen designs sold under the EMCO and Andersen labels at major home centers. This guide walks through the main Andersen storm door families, the features that matter, how to size and install one, and how to pick the right model for your entry.

What a Storm Door Does

Installed in front of your main entry door, a storm door shields the primary door from rain, snow, and sun, extending its life and keeping its finish looking new. It creates an insulating air pocket between the two doors that trims drafts and can improve energy efficiency in the entryway. Swap the glass panel for a screen and it becomes a way to let fresh air flow through the house while keeping insects out. And a solid storm door with a good lock adds a second barrier of security at the front of the home.

Andersen built its reputation in this category on convenience, especially the retractable insect screen that disappears into the door frame when you don’t need it — no seasonal panel swapping, no storing a screen in the garage half the year.

The Main Andersen Storm Door Families

Andersen’s storm doors are organized into series, and choosing the right family is the first decision. They generally break down by how the glass and screen work.

  • Retractable screen doors: The signature Andersen design (sold in lines like the 3000 and 4000 Series and the EMCO Forever line). A full pane of glass covers the door, and a hidden insect screen rolls down from a housing at the top only when you lower the glass. Best of both worlds — full view when closed, fresh air when you want it, and no storing panels.
  • Full-view doors: A single large pane of glass for maximum view and light, with interchangeable glass and screen panels you swap by season. Showcases a beautiful entry door behind it.
  • Ventilating doers: Traditional two- or three-panel doors where the top and bottom sections have glass and screen inserts you slide to control airflow. Classic and durable.
  • Self-storing doors: Glass and screen panels both stay in the door year-round; slide the glass down and the screen is already there, so you never handle loose panels.

The retractable-screen models are the most convenient and the most popular for a reason, but a full-view door shows off a handsome front door better, and a ventilating or self-storing style suits homeowners who want a more traditional look.

Glass and Frame Features

Beyond the series, several features distinguish a basic storm door from a premium one:

  • Low-E and insulated glass: Higher-end Andersen doors offer Low-E coatings that reflect heat, keeping the entry cooler in summer and reducing heat loss in winter.
  • Frame material and construction: Aluminum frames with a wood or composite core, finished in baked-on colors, resist warping and hold up to weather. Heavier-gauge frames feel more solid and last longer.
  • Color options: White, sandtone, almond, black, bronze, and more, so you can match or complement your entry door and trim.
  • Hardware: Matching handlesets with keyed deadbolts add security and let you lock the storm door independently.
  • Pet-friendly and heavy-duty options: Some lines offer reinforced frames and pet doors for households that need them.

Match the glass performance to your climate — Low-E is well worth it on a sunny, hot-summer entry or a cold-winter one — and match the color and hardware to your home’s exterior for a finished look.

Measuring for the Right Size

Storm doors are sold to fit standard entry-door openings, and getting the measurements right is essential. Most Andersen storm doors come in standard widths of 32, 34, and 36 inches and are designed to be trimmed to fit the exact height of your opening on site.

Measure the width of your door opening at the top, middle, and bottom, inside the trim (the “brickmould”), and use the smallest measurement. Measure the height on both sides. Note which way you want the door to swing and where the handle should be — storm doors are typically reversible for left- or right-hand hinging, but you’ll set the hinge side during installation. Also check that your existing brickmould is deep and flat enough to mount the door’s hinge rail. Taking careful measurements before you buy prevents the frustration of a door that won’t fit the opening.

Looking to buy Anderson Storm Door? Compare top-rated options.
Shop on Amazon →Browse Our Shop
As an Amazon Associate we earn from qualifying purchases.

Installation Overview

Installing an Andersen storm door is a manageable DIY project for a confident homeowner with basic tools, typically a few hours of work. The general sequence:

  1. Attach the hinge rail to the door slab (or confirm it’s pre-attached), and mount the assembly to the hinge side of the opening, plumb and square.
  2. Set the door in the opening and fasten the hinge-side rail to the brickmould, checking for even reveal all around.
  3. Trim and install the top and bottom expander pieces to seal the door to the opening and adjust the sweep at the threshold.
  4. Mount the latch-side rail and install the handleset and closer.
  5. Attach the pneumatic closer(s) and a safety chain so the door closes gently and doesn’t fly open in the wind.

Andersen’s kits come with detailed instructions and most of the hardware. The trickiest parts are keeping everything plumb and cutting the rails to the exact height, so measure twice and dry-fit before drilling. If your opening is badly out of square or you’re not comfortable, a handyman can install one quickly.

Adjusting the Closer and Sweep

Two adjustments make a storm door pleasant to live with. The pneumatic closer’s speed screw controls how fast the door shuts — dial it so the door closes firmly but not with a slam that startles the house. Most doors use two closers for smooth, controlled action; adjust them together. The bottom sweep, a flexible seal along the door’s base, should just kiss the threshold to block drafts and insects without dragging. Loosen the sweep’s screws and slide it down to seal a gap, or up if it’s binding.

Choosing the Right Model for You

Match the door to how you’ll use it. If you want fresh air with zero hassle and hate storing seasonal panels, a retractable-screen model is the clear pick. If you have a gorgeous front door you want to show off and light you want to let in, choose a full-view door with Low-E glass. If you prefer a traditional look and simple durability, a ventilating or self-storing model delivers. In every case, spring for Low-E glass on a sun- or weather-exposed entry, pick a color that complements your home, and add a keyed handleset for security.

An Andersen storm door is a modest investment — commonly $200 to $600 depending on the series and features — that protects a far more expensive entry door, cuts drafts, and brings a breeze into the house on demand. Measure carefully, choose the series that fits your lifestyle, and you’ll get a front entry that’s more comfortable, more efficient, and better protected for years.

Maintenance and Longevity

A storm door lives outdoors and takes constant use, so a little upkeep keeps it working smoothly for a decade or more. Wipe the glass and frame periodically, and on retractable-screen models keep the screen track and roller housing clean so the screen retracts and deploys without snagging — grit is the main enemy of that mechanism. Lubricate the hinges and the pneumatic closer’s pivot points once a year with a light lubricant, and check that the closer’s mounting screws stay tight, since the repeated slamming action can loosen them over time.

Inspect the weatherstripping and bottom sweep each season and replace them when they harden or tear, as those seals are what block drafts and insects. If the door starts sagging or dragging, the hinge screws may need tightening or the door may need a minor adjustment at the closer and sweep. Andersen sells replacement parts — closers, sweeps, screens, and hardware — so wear items are easy to renew rather than replacing the whole door, which is a big part of why these doors last.

Frequently Asked Questions

Is it spelled Anderson or Andersen storm door?

The brand is Andersen, though many shoppers search “Anderson.” Either way you’re looking at the same well-known window and door maker, whose storm doors are widely sold at home centers, including the retractable-screen designs.

What size storm door do I need?

Most fit standard 32-, 34-, or 36-inch openings and are trimmed to your exact height on site. Measure the opening width at top, middle, and bottom inside the trim and use the smallest number, then measure the height on both sides before buying.

Can I install an Andersen storm door myself?

Yes — it’s a manageable few-hour project for a confident DIYer with basic tools. The keys are mounting the hinge rail plumb and square and cutting the rails to the exact height. If your opening is badly out of square, a handyman can install one quickly.