Plenty of navy paints look rich on a chip and then turn almost black on the wall. Behr Very Navy (color code M500-7) sits right on that line: it is a deep, cool navy with a noticeable charcoal-gray cast, and published color data puts its light reflectance value (LRV) at roughly 6. That makes it one of the darker blues in the Behr fan deck, so it reads moody and saturated in good light and close to ink in a dim room.
It works best where you want a confident, grounded color in a contained dose: kitchen islands, lower cabinets, bathroom vanities, front doors, built-ins and a single accent wall. Pair it with a soft or clean white for trim, warm wood or brass for contrast, and plenty of light, and it reads unmistakably blue rather than black.
- Behr Very Navy at a Glance
- Undertones: How Very Navy Shifts in Different Light
- Where Behr Very Navy Works Best
- Coordinating Whites and Accent Colors
- How Very Navy Compares With Other Navy Paints
- Tools, Materials and Painting Tips for a Dark Navy
- Troubleshooting Dark Navy Paint
- Cost and When to Hire a Painter
- Frequently Asked Questions
Digital swatches vary from screen to screen, so treat any on-screen preview as a starting point. Always paint a large sample on the actual surface and look at it morning and evening before committing.
Behr Very Navy at a Glance
The values here come from published color data for M500-7. Behr updates its color details from time to time, so confirm the current figures on the official color page or a physical swatch before you order.
| Spec | Value | What it means |
|---|---|---|
| Color name and code | Very Navy, M500-7 | Use the code when ordering so the store tints the right formula |
| Color family | Blue, dark | Sits in the deep navy range rather than a mid-tone blue |
| LRV | About 6 | Reflects very little light; rooms need good lighting to keep it from reading black |
| Hex (digital) | #3A4859 | Useful for mood boards, but screens never match paint exactly |
| Undertone | Cool, with a gray or charcoal cast | Looks more muted and sophisticated than a bright royal or sapphire navy |
| Best sheens | Matte or eggshell on walls; satin or semi-gloss on trim, cabinets and doors | Higher sheen shows more depth but also highlights surface flaws |
Undertones: How Very Navy Shifts in Different Light
Very Navy is a blue with a heavy dose of gray, and that gray is what keeps it from feeling nautical or bright. Unlike navies that lean purple or green, it stays fairly balanced, though some viewers see a faint slate or teal hint in strong daylight.
- North-facing rooms: Cool, indirect light pushes it toward charcoal. Expect a moody, almost black look, especially on large walls.
- South-facing rooms: Warm, bright light pulls out the most blue. This is where it looks closest to the chip.
- East and west exposures: It looks bluer during the sunny half of the day and deepens noticeably in the shaded half.
- Warm bulbs (2700K): The yellow light grays it down and can make it look slightly muddy.
- Neutral or daylight bulbs (3000K to 4000K): These keep the blue cleaner and more saturated.
Because the LRV is so low, Very Navy absorbs most of the light that hits it. On a long hallway or an entire basement, that can feel heavy. On a single wall, cabinet run or door, the same depth becomes an asset.
Where Behr Very Navy Works Best
Kitchen cabinets and islands
Navy lower cabinets with white or light upper cabinets remain a durable look. Behr Very Navy suits this two-tone approach because its gray cast blends with stainless appliances and both warm and cool countertops. On a kitchen island, it creates a focal point without overpowering an open floor plan. Use a cabinet-grade enamel in satin or semi-gloss for washability.
Bathroom vanities
A deep navy vanity against light tile and a white counter looks crisp and intentional. Brushed brass or matte black hardware both pair well. Choose a moisture-resistant bath formula or a cabinet enamel, and let it cure fully before heavy use.
Front doors and exterior accents
Very Navy is a classic front door color on white, gray, greige and warm brick exteriors. Behr colors can generally be tinted into its exterior product lines, but confirm availability for the specific exterior product and sheen you choose. On a sunny, south- or west-facing door, a dark color absorbs heat, so check the door maker’s guidance on dark colors for fiberglass and vinyl-clad doors.
Accent walls, offices and bedrooms
A single wall behind a bed or a full study painted in Very Navy creates a cocooning effect. In small rooms, painting walls and trim the same color (color drenching) can actually make the space feel calmer and less chopped up.
Built-ins and furniture
Bookcases, window seats and refinished dressers are low-risk ways to try the color. A quart is usually enough for a small piece.
Coordinating Whites and Accent Colors
The right white makes or breaks a navy scheme. A white that is too stark can look harsh next to such a deep color, while a white that is too creamy can look yellow beside its cool gray cast.
- Clean, soft whites such as Behr Polar Bear (75) give a crisp, classic contrast on trim and upper cabinets without looking clinical.
- Warmer off-whites such as Behr Swiss Coffee (12) soften the contrast for a cozier, traditional feel.
- Gentle greige whites such as Behr Weathered White (HDC-NT-21) work well on walls next to navy cabinets when you want the room to feel relaxed rather than high contrast.
Beyond whites, Very Navy pairs nicely with natural oak and walnut, warm brass, camel or cognac leather, soft gray-blues, muted sage and warm reds or rust tones in small doses. In a two-tone kitchen, white oak open shelving or a butcher-block island top bridges the cool paint and warm wood.
How Very Navy Compares With Other Navy Paints
Shoppers often compare Very Navy with popular navies from other makers, such as Benjamin Moore Hale Navy and Sherwin-Williams Naval. All three are deep, versatile navies, and differences are subtle. Very Navy tends to read a touch grayer and more muted than brighter, cleaner navies. Some competing navies look slightly warmer or more saturated in daylight. Because exact numbers differ by source, the reliable way to compare is to put large samples of each side by side on the same wall.
Within Behr’s own range, nearby deep blues include lighter, brighter navies and darker blue-blacks. If Very Navy looks too dark in your space, step to a navy with a higher LRV. If it looks too blue, a navy with more gray or a blue-black will feel moodier.
Tools, Materials and Painting Tips for a Dark Navy
Deep colors are less forgiving than light ones. A few habits help Very Navy go on evenly:
- Tinted primer. Ask for a gray-tinted primer, especially over white, patched or glossy surfaces. It reduces the number of top coats.
- Quality angled paint brush. A 2 to 2.5 inch angled sash brush gives straight cut lines at ceilings and trim, which matters because any wobble shows against a dark wall.
- Roller covers. Use a 3/8 inch nap for smooth walls and a fine foam or microfiber roller for cabinets and doors.
- Two full coats. Plan on two coats at minimum, even with paint-and-primer products. Deep bases have less hiding pigment.
- Box your paint. Mix all cans together in a larger bucket so color is consistent across the job.
Step by step for an accent wall
- Clean the wall, fill holes, sand patches smooth and spot-prime them.
- Tape adjoining walls and ceiling, then cut in edges with an angled brush.
- Roll in sections, keeping a wet edge and finishing each section with light, top-to-bottom strokes.
- Let the first coat dry per the label (often 2 to 4 hours), then cut in and roll the second coat.
- Pull tape while the final coat is still slightly soft for a clean line.
Troubleshooting Dark Navy Paint
- Flashing or shiny patches: Uneven sheen happens when patches are not primed or when paint is rolled over partially dry areas. Spot-prime and recoat the full wall.
- Roller marks and lap lines: Work in smaller sections and maintain a wet edge. Avoid pressing hard on a nearly dry roller.
- Burnishing and scuffs: Flat finishes on dark colors can show shiny marks when rubbed. Eggshell or satin resists this better in busy areas.
- Looks black: Add brighter or cooler bulbs, or try a lighter navy on the next project.
- Touch-ups do not match: Touch up with the same batch and sheen, and feather the edges with the same tool used originally.
Cost and When to Hire a Painter
A gallon of mid- to premium-grade interior paint generally runs about $35 to $70, and an accent wall usually needs one gallon plus primer. Professional painters commonly charge about $2 to $6 per square foot for walls and considerably more for cabinets, where a full kitchen often lands between $3,000 and $8,000 depending on size and prep. Hiring a pro makes the most sense for cabinets, tall stairwells and exterior doors that need a sprayed or furniture-smooth finish.
Behr Very Navy rewards careful prep and good light. Sample it generously, pick a white that suits your room’s lighting, and it can anchor a kitchen, bath or entry for years.
Frequently Asked Questions
What is the LRV of Behr Very Navy?
Published color data puts Very Navy (M500-7) at an LRV of about 6, which makes it a very dark color. Confirm the current figure on Behr’s official color page or swatch, since rounding varies by source.
Does Very Navy look black?
In dim or north-facing rooms and under warm bulbs, it can read almost black. In bright daylight it shows clearly as a muted, gray-leaning navy.
Is Very Navy a warm or cool navy?
It is a cool navy with a gray or charcoal cast. It does not lean noticeably purple, which helps it pair with both warm wood and cool stainless finishes.
What white trim goes with Very Navy?
Clean, soft whites give the crispest contrast, while slightly warm off-whites create a softer look. Test both beside a painted Very Navy sample in your lighting before choosing.
Can I use Behr Very Navy on kitchen cabinets?
Yes. Use a cabinet or enamel formula in satin or semi-gloss, prime glossy or patched surfaces, and allow full cure time before heavy use for the most durable finish.