Blue siding is one of the riskiest exterior choices to make from a small chip, because a color that looks calm on a sample card can turn loud across 1,500 square feet of wall. CertainTeed Pacific Blue siding is a factory vinyl color that sits in the middle of that range: a clear, saturated blue with enough depth to look intentional, not so dark that it reads navy from the street. CertainTeed shows it on both lap siding and its shake and shingle panels, which is why you often see it on coastal cottages, Cape Cods and gable accents.
The short version: Pacific Blue is offered in several CertainTeed vinyl lines, most consistently in the Cedar Impressions shakes and shingles and in Monogram clapboard. Availability varies by region and changes from year to year, so the line you want may not stock it locally. It pairs best with crisp white or cool gray trim, a charcoal or black roof, and a door in white, black, red or a natural wood tone.
- CertainTeed Pacific Blue Siding at a Glance
- How Pacific Blue Looks on a House
- Which CertainTeed Lines Carry Pacific Blue
- Trim, Door and Roof Pairings
- Choosing and Ordering: A Step-by-Step Decision Guide
- Installation and Care Tips
- Ladder Safety and When to Call a Pro
- Cost Considerations
- Common Problems and Fixes
- Frequently Asked Questions
CertainTeed Pacific Blue Siding at a Glance
Start with the basics. Treat line availability as a starting point and confirm it with a current regional color chart.
| Spec | Value | What it means |
|---|---|---|
| Color family | Medium-deep, saturated blue | Reads as true blue in sun, a little grayer in shade |
| Material | Factory-colored vinyl (polymer) siding | Color runs through the panel, so scratches do not show a white base |
| Cedar Impressions shakes and shingles | Offered in Pacific Blue | Shown by CertainTeed on Perfection shingles and staggered shakes |
| Monogram clapboard | Offered in Pacific Blue | CertainTeed shows Double 5 inch and Double 4 inch clapboard in this color |
| Other lap and board and batten lines | Varies by region | Some distributors list it on other profiles; confirm with your dealer |
| Warranty | Lifetime limited (Cedar Impressions) | Read the color retention terms for your exact line before buying |
| Typical installed cost | Roughly mid-range for vinyl | Shakes and premium lap profiles cost more per square than basic lap |
One point matters more than any number on a spec sheet. CertainTeed notes that color availability depends on region and product line, so a sample from a friend’s house in another state may not match what your local supplier can order. Ask for the current chart for your area.
How Pacific Blue Looks on a House
Saturated blues shift more than neutrals do. In full southern or western sun, Pacific Blue tends to brighten and look cleaner, almost cheerful. On a north wall or under deep eaves, it drops toward a dusty, slate-leaning blue. That swing is normal, and it is the reason a single chip is a poor way to decide.
Texture changes the color too. On smooth or lightly grained lap siding, the blue looks even and fairly modern. On a cedar shake profile, the shadow lines between shingles break up the surface, so the same color reads slightly darker and more traditional from the curb. Many homeowners like Pacific Blue more on shakes for exactly that reason.
Surroundings play a part. Against green lawns and mature trees, blue siding looks settled and calm. In a neighborhood full of beige and white houses, it will stand out more, which is fine if you want the house to have personality. Check HOA rules first, because some associations restrict saturated colors on the main body of a house.
Full Body or Accent Use
Pacific Blue works both ways. As the main body color, it suits smaller and mid-size homes with simple rooflines. As an accent, it shines in gables, dormers, a bump-out or the second story over a white or gray lower level. CertainTeed’s own palette suggestions pair a darker blue for the main body with Pacific Blue on shakes and shingles, which is a reliable two-tone recipe.
Which CertainTeed Lines Carry Pacific Blue
Here is where homeowners get tripped up. A color name is not a guarantee that every profile is available in it. Based on CertainTeed’s pages and brochures, the strongest matches are these:
- Cedar Impressions shakes and shingles: The most consistent home for Pacific Blue. CertainTeed lists it among the Perfection shingle colors and shows it on staggered and straight-edge profiles.
- Monogram clapboard: CertainTeed’s color pages show Monogram in Pacific Blue on Double 5 inch and Double 4 inch clapboard, which makes a coordinated lap and shake combination possible.
- Other profiles: Distributors list it on some board and batten, insulated and other lap products, but that varies by region and year.
If you plan to mix lap siding with shakes in the same color, ask the dealer to put both physical samples side by side in daylight. Different profiles and textures can look slightly different even when the color name is the same, and a small mismatch is easier to accept on separate wall planes than on adjoining surfaces.
Trim, Door and Roof Pairings
Blue is forgiving to pair, but it rewards a plan. Use these combinations as a starting point and test them with real samples.
| Element | Strong pairing | Effect |
|---|---|---|
| Trim | Bright white | Classic coastal look, crisp edges |
| Trim | Cool light gray | Softer, more modern contrast |
| Roof | Charcoal or black | Grounds the blue and looks clean |
| Roof | Weathered gray blend | Relaxed, traditional feel |
| Front door | Red or deep coral | Cheerful, high-contrast focal point |
| Front door | Natural stained wood | Warms the cool blue |
| Front door | Black or white | Simple and safe |
CertainTeed’s color guidance suggests cool neutrals, such as charcoal or a light silvery gray, alongside Pacific Blue. Warm tan or cream trim can work, but it shifts the look toward a farmhouse feel and can make the blue look slightly greener in some light.
Roofs deserve extra thought because they are the hardest element to change later. Brown roof blends with strong red or orange granules tend to fight with a clear blue. If you are keeping an existing brown roof, consider using Pacific Blue as an accent rather than the main body.
Stone and brick also matter. Gray fieldstone or a gray stacked stone veneer looks natural with blue. Red brick can work with a white trim buffer between the two materials, though it reads busier.
Choosing and Ordering: A Step-by-Step Decision Guide
- Confirm availability. Ask your dealer for the current regional chart and confirm Pacific Blue is offered in the exact profile you want.
- Get full-size samples. Order or borrow actual panels, not printed chips. Tape them to at least two walls, one sunny and one shaded.
- View at different times. Look at the samples in morning light, at midday and in late afternoon. Saturated blues change most at the ends of the day.
- Check from the street. Step back at least 50 feet. Colors usually look lighter and brighter from a distance.
- Test pairings together. Hold the trim, roof and door samples next to the siding at the same time.
- Read the warranty. Ask for the warranty document for your exact line and note the terms on fade and color retention.
- Order enough material. Add 10 to 15 percent for waste and future repairs, and store a few spare panels. Dye lots and availability can change.
That last step is easy to skip and painful to regret. If a storm damages a wall five years from now and the color has been reformulated or dropped in your region, a few stored panels make a repair invisible.
Installation and Care Tips
Vinyl siding expands and contracts with temperature, and darker or more saturated colors absorb more heat than white. Proper installation makes a difference: nails should be centered in the slots and left slightly loose so the panel can move, and panels need the correct gap at corners and channels. Ask your installer to follow the manufacturer’s instructions for spacing and fastening.
Avoid placing grills, fire pits or reflective surfaces close to the siding. Concentrated heat and sunlight reflected from some low-emissivity windows can distort vinyl panels, and blue shows that distortion clearly.
For routine care, wash once or twice a year with a soft brush and a mild cleaner made for vinyl. A dedicated vinyl siding cleaner helps lift mildew and road film without dulling the surface. Rinse from the top down. If you use a pressure washer, keep it on a low setting and spray level or downward, never upward under the laps.
Ladder Safety and When to Call a Pro
Siding work and washing upper walls both involve ladders, and falls from ladders send thousands of homeowners to the emergency room every year. Set an extension ladder on firm, level ground at about a 4 to 1 angle (one foot out for every four feet up), extend it at least 3 feet past the roofline if you are stepping off, and keep three points of contact. Never overreach; move the ladder instead. Keep it well clear of power lines.
For any home of two or more stories, hire a pro for installation, repairs and high cleaning. Installers use scaffolding, pump jacks and fall protection that most homeowners do not own. Call a pro too if you see warped panels, loose sections after a storm, or signs of water behind the siding such as peeling interior paint or soft sheathing.
Cost Considerations
Choosing CertainTeed Pacific Blue siding over a neutral rarely changes the price much within a line. The profile drives the cost. Basic lap siding sits at the lower end of vinyl pricing, while premium thick panels, insulated siding and cedar shake profiles cost noticeably more per square. Installed costs also rise with trim complexity, second-story work and removal of old siding. Get at least three written quotes that list the exact product line, profile, color and trim details so you can compare like for like.
Common Problems and Fixes
The color looks different from the sample. This is the most common complaint with certainteed pacific blue siding and saturated colors in general. Lighting, texture and the surrounding landscape all shift saturated blues. Full-size samples on site are the fix before you buy.
One wall looks lighter. Sun exposure fades all exterior colors slowly over time, and south and west walls take the most. Read your warranty’s color retention terms and keep records of the installation date.
Green streaks or film. Mildew grows on shaded walls. Wash with a vinyl-safe cleaner and trim back shrubs to improve airflow.
Rippled panels. Usually caused by nails driven too tight or heat exposure. A siding pro can remove and rehang the affected courses.
Frequently Asked Questions
Is Pacific Blue a navy color?
No. Pacific Blue is a medium-deep, saturated blue that is noticeably lighter and brighter than navy. In shade it can look a little grayer, but it does not read as dark navy from the street.
Which CertainTeed siding lines offer Pacific Blue?
CertainTeed shows Pacific Blue on Cedar Impressions shakes and shingles and on Monogram clapboard. Other profiles may offer it in some regions. Confirm with a current regional color chart from your dealer.
What trim color goes with Pacific Blue siding?
Bright white is the classic choice and gives a crisp coastal look. Cool light gray is a softer, more modern option. Warm cream works but shifts the feel toward farmhouse style.
What roof color goes with pacific blue siding?
Charcoal, black and weathered gray roofs pair best. Brown roofs with strong red or orange tones tend to clash with a clear blue, so use the blue as an accent if you are keeping that kind of roof.
Will Pacific Blue vinyl siding fade?
All exterior colors fade slowly with sun exposure, and saturated colors show it more than neutrals. Read the color retention terms in the warranty for your exact CertainTeed line before you buy.
Can I paint over Pacific Blue vinyl siding later?
Vinyl can be painted with a vinyl-safe exterior paint, but choose a color no darker than the original unless the paint is rated for darker shades on vinyl. Darker paint can cause heat warping, and painting may affect the warranty.