When a shed, garage, or porch has a roof too flat for shingles and too small to justify a big budget, rolled roofing earns its keep. Roll out roofing, more commonly called rolled roofing, is essentially asphalt shingle material sold in long rolls instead of individual tabs. It is one of the cheapest and fastest ways to cover a low-slope surface, and a determined DIYer can finish a small roof in a day. It is not, however, a replacement for a real shingle roof on your house. Here is what it is, how it goes down, and where it makes sense.
Part of our Roofing guide — explore the full guide →
What Rolled Roofing Actually Is
Rolled roofing is a mineral-surfaced asphalt product, often abbreviated MSR, made from the same asphalt-saturated base as standard shingles and topped with ceramic granules. It typically comes in rolls about 3 feet wide and 36 feet long, covering roughly 100 to 108 square feet, or one roofing square, per roll. Because it lays down in wide strips, it covers ground fast and creates fewer seams than individual shingles. That speed and low material cost are its main selling points.
Where It Belongs and Where It Doesn’t
Rolled roofing is built for low-slope roofs, generally those with a pitch too shallow for shingles, which usually need a minimum slope to shed water properly. It shines on utility structures:
- Sheds and outbuildings
- Detached garages and workshops
- Porch and patio covers
- Low-slope additions and lean-tos
It is generally not recommended for the main roof of a home. The look is plain, the lifespan is short compared to other options, and most homeowners want better curb appeal and durability over their living space. Manufacturers also specify a minimum slope even for rolled products, so a truly flat roof may need a different membrane system entirely.
Installation Methods
There are three main ways rolled roofing is attached, and the right one depends on the product and the deck. Always follow the specific manufacturer’s instructions, since methods vary by product.
- Nail-down (exposed nail): The simplest method. Strips are laid, overlapped, and fastened with roofing nails, with seams sealed by roofing cement. Fast and DIY-friendly, but the exposed fasteners are potential leak points over time.
- Concealed nail: Nails are driven where the next course will cover them, and the overlap is cemented down, hiding the fasteners for a cleaner, more weather-tight result.
- Torch-down or peel-and-stick: Some rolled membranes are heat-welded with a torch or come with a self-adhesive backing. Torch application is best left to professionals because of the open-flame fire risk.
Basic Install Steps
For a typical nail-down job on a shed, the sequence looks like this:
- Start with a clean, dry, solid roof deck and install drip edge at the eaves.
- Let the rolls warm in the sun so they unroll flat without cracking, and cut to length.
- Begin at the lowest edge and work up so each higher course overlaps the one below, shedding water.
- Fasten with roofing nails and apply roofing cement along laps and any exposed nail heads.
- Press out air pockets and wrinkles as you go for full adhesion.
- Seal all seams, edges, and penetrations like vent pipes thoroughly.
Lifespan and Maintenance
Be realistic about longevity. Rolled roofing typically lasts somewhere in the range of 5 to 10 years, well short of the 20-plus years you would expect from architectural shingles. Sun, ponding water, and temperature swings wear it faster, and the thin single-layer construction offers little redundancy if a seam opens. The upside is that replacement is cheap and quick. Inspect it once or twice a year, reseal any lifting seams or cracked spots with roofing cement, and keep debris and standing water off the surface to get the most out of it.
Rolled Roofing vs. Shingles
The trade-off is straightforward: rolled roofing wins on cost and speed, shingles win on lifespan and looks. Materials for rolled roofing run a fraction of the price of shingles, and installation is far faster with fewer pieces to handle. Shingles, on the other hand, last two to four times longer, look far better, and add value to a home. For a shed or garage where appearance and decades of service do not matter much, rolled roofing is the sensible, economical pick. For your house, the longer-lasting option is almost always worth the extra money.
Cost and What to Budget
One of rolled roofing’s biggest appeals is price. Materials typically run only a fraction of what shingles cost per square, often a small fraction, which is why it dominates the shed and outbuilding market. For a modest shed roof, the material cost for a couple of rolls plus roofing nails and a tube or two of roofing cement is genuinely low. Add a roll of underlayment or drip edge if your project needs it. Because installation is fast and DIY-friendly, you also save on labor if you do it yourself. Just remember the lower upfront cost is partly offset by the shorter lifespan; over 20 years you may reroof two or three times where a shingle roof would last the whole span.
Common Mistakes to Avoid
A few errors cause most rolled-roofing failures. Installing it on too steep or, more often, too flat a slope outside the product’s rated range invites leaks; always check the minimum slope on the package. Failing to lap courses correctly, so water can run under a seam instead of over it, is another frequent problem, so always work uphill and overlap generously. Skimping on roofing cement at seams, edges, and around penetrations leaves the weak points exposed. Installing it cold, when the material is stiff and prone to cracking, also leads to trouble; let the rolls warm in the sun first. Avoid these, and a simple rolled roof performs reliably for its intended life.
The Bottom Line
Roll out roofing is the right tool for the right job: a cheap, fast, low-slope cover for sheds, garages, and porches that a handy homeowner can install in an afternoon. Match the install method to the product, lap every seam toward the downhill side, and seal thoroughly to fend off leaks. Just keep your expectations honest, plan to replace it within about a decade and keep it off your main house, and rolled roofing will do exactly what it is meant to do.