Home Improvement

Valspar Black Paint Colors: Undertones and Best Uses

Valspar Black Paint Colors: Undertones and Best Uses

Black paint looks simple until you put two blacks side by side and one turns navy while the other goes faintly brown. That is why shopping Valspar black paint colors by name alone causes so many repaints. The colors that look identical on a chip separate quickly on a front door, a kitchen island or an accent wall, and the difference comes down to two numbers on the color page: LRV and undertone.

LRV (Light Reflectance Value) measures how much light a color reflects from 0 (absolute black) to 100 (pure white). Every color in this roundup sits under about 6, so all of them read as black or near-black on a wall. Undertone is what shows when light hits the surface: blue, green or neutral in a cool black; brown or red in a warm one. Valspar’s own color pages classify nearly every black in its family as cool, with a few warm exceptions, so the real choice is usually between neutral-cool, blue-cool, green-cool and warm.

Valspar Black Paint Colors Compared

Every LRV and undertone in this table comes from the color’s listing on Valspar’s site. Values are rounded to one or two decimal places.

Color (code) LRV Listed undertone How it reads Best uses
Tuxedo (8006-8G) 2.0 Cool Deep black with a faint blue-gray cast Front doors, statement walls
Dark Kettle Black (4011-2) 2.33 Cool Near-neutral, true black Trim, window sashes, furniture
Noir (4009-2) 2.77 Cool Soft neutral black Cabinets, interior doors
Tomcat (8006-12G) 3.0 Cool Flat, gray-leaning black Accent walls, media rooms
Very Black (5011-2) 3.17 Cool Black with a slate-blue lean Kitchen islands, shutters
Nocturnal Green (5011-1) 3.28 Cool Black with a green-teal shadow Libraries, dens, built-ins
Black Evergreen (5009-1) 4.87 Cool Deep green-black Cabinetry, exterior doors on wooded lots
Caviar (8006-4G) 5.0 Cool Soft charcoal-black Whole rooms, ceilings
Safari Brown (6009-1) 5.16 Warm Brown-black, cozy Wood-heavy rooms, warm-white trim pairings
Ebony Keys (8006-2G) 6.0 Cool Lightest of the group, a soft deep charcoal Large walls, bedrooms

Two things stand out. First, the darkest blacks (Tuxedo and Dark Kettle Black) are within a fraction of an LRV point of each other, so pick between them by undertone and finish, not darkness. Second, if you want a black that feels warm, Safari Brown is the clearest option in this group; most of the family leans cool.

Cool, Neutral or Warm: Matching Undertone to the Room

Cool blacks with a blue lean, such as Tuxedo and Very Black, look crisp next to white marble, chrome, gray tile and cool LED lighting. They can look slightly navy in strong north light, which many people like on a front door.

Neutral blacks such as Dark Kettle Black and Noir are the safest picks when you are not sure. They stay black under most bulbs and sit comfortably next to both warm wood floors and cool stone.

Green-cool blacks such as Nocturnal Green and Black Evergreen bring a subtle depth that shows in daylight. They pair especially well with brass hardware, walnut, leather and lots of plants.

Warm options like Safari Brown suit rooms with honey oak floors, cream trim, terracotta or warm-white bulbs around 2700K, where a cool black can look harsh or slightly purple.

Best Uses for Black Paint Around the House

Front doors and exterior trim

Choose an exterior-rated product in the color you like, and favor satin or semi-gloss for washability. Very dark colors absorb heat, so on a south- or west-facing door, check that the product is approved for dark colors on that substrate, especially on vinyl or composite.

Kitchen cabinets and islands

Dark Kettle Black, Noir and Very Black all look sharp on cabinets. Use a cabinet and trim enamel in satin or semi-gloss, and degrease and scuff-sand before priming.

Accent walls and whole rooms

For whole rooms, slightly lighter near-blacks such as Caviar or Ebony Keys feel less cave-like than an LRV 2 black. A flat or matte finish hides wall flaws and gives the velvety look most people want from black walls.

Interior doors and window sashes

Black interior doors and window frames are a popular modern look. A neutral black avoids clashing with the hardware finish, and semi-gloss resists fingerprints.

Pairing Black With Trim, Floors and Hardware

Black walls and doors live or die by what sits next to them. A few pairings that consistently work:

  • Trim: A crisp white makes cool blacks like Tuxedo and Very Black look graphic and modern. A creamy or warm white softens neutral blacks like Noir and suits older homes. For a tone-on-tone look, paint trim the same black in a higher sheen, such as matte walls with semi-gloss trim.
  • Floors: Light oak and maple keep a black room from feeling heavy. Mid-brown and walnut floors pair best with warm or green-leaning blacks such as Safari Brown or Black Evergreen. Gray luxury vinyl and tile look cleanest with the cool, blue-leaning blacks.
  • Hardware and fixtures: Brass and gold finishes glow against green-black and warm black. Polished nickel and chrome suit the cool blacks. Matte black hardware on a black cabinet disappears, which can look sleek on slab doors but flat on shaker profiles.
  • Ceilings: In a black room, a ceiling in the same color makes the walls recede and feels intimate. A white ceiling keeps the room taller and brighter. Caviar or Ebony Keys are easier on a ceiling than an LRV 2 black.
Looking to buy Valspar Black Paint Colors? Compare top-rated options.
Shop on Amazon →Browse Our Shop
As an Amazon Associate we earn from qualifying purchases.

Picking the Right Black in Three Steps

If the table still leaves you torn, narrow it down this way. First, decide on depth: true black (Tuxedo, Dark Kettle Black, Noir) or softer near-black (Caviar, Ebony Keys). Second, pick the undertone family that matches fixed elements in the room, such as countertops, flooring and tile. Third, test the two finalists side by side on the same wall, in the finish you plan to use, because sheen changes how dark a black reads. Flat finishes look deeper and softer; semi-gloss reflects light and can make a black look slightly lighter and more blue.

How to Paint With Black Without Streaks

  1. Sample big. Peel-and-stick paint sample swatches or 2 by 2 foot painted boards let you compare three blacks on the actual wall at different times of day.
  2. Prep thoroughly. Black shows every bump and patch. Fill, sand smooth and wipe away dust.
  3. Prime with a gray or tinted primer. White primer forces extra coats under black.
  4. Cut in and roll one wall at a time. Keep a wet edge to avoid lap marks and flashing.
  5. Apply two full coats. Respect the recoat time on the can; rolling over tacky black paint causes streaks.
  6. Remove tape while the last coat is slightly soft to get crisp lines without peeling.

Troubleshooting Black Paint Problems

Shiny patches (flashing). Caused by uneven drying or touch-ups. Repaint the full wall section corner to corner with the same roller nap.

It looks blue, green or purple. That is the undertone showing in your light. Switch to a more neutral black such as Dark Kettle Black or change bulbs to a warmer color temperature.

Scuffs and burnishing. Flat black marks easily in high-traffic areas. Use matte or eggshell in hallways and satin on doors and trim.

Lint and dust in the finish. Use a lint-free roller cover, vacuum before painting and keep the room closed while it dries.

Costs and When to Hire a Pro

Quality interior paint generally costs about $35 to $80 per gallon, with cabinet enamels and premium exterior lines at the higher end. A single accent wall often needs about 1 gallon for primer and two coats, while a full 12 by 12 foot room needs about 2 gallons of finish paint. Professional painters typically charge a few dollars per square foot for walls, and cabinet painting is commonly priced per door or as a project in the low to mid thousands.

Consider a pro for kitchen cabinets, two-story rooms, exterior work above one story or homes built before 1978, where existing paint should be tested for lead before sanding. Valspar updates colors and collections periodically, so confirm the current color page before buying. Comparing a few Valspar black paint colors in your own light remains the most reliable way to find the right one.

Frequently Asked Questions

What is the darkest Valspar black paint?

Tuxedo (8006-8G) is listed at an LRV of 2.0, with Dark Kettle Black (4011-2) close behind at about 2.33. Both read as true black on most walls.

Is Dark Kettle Black a warm or cool black?

Valspar lists Dark Kettle Black with a cool undertone, but its very low color strength makes it look close to neutral in most light, which is why it is a popular all-purpose black.

Which Valspar black paint has a warm undertone?

Safari Brown (6009-1) is listed with a warm undertone and an LRV around 5.16. It reads as a soft brown-black that suits wood-heavy rooms.

What finish is best for black walls?

Flat or matte hides imperfections and looks rich on walls. Use eggshell in busier rooms and satin or semi-gloss on doors, trim and cabinets.

How many coats does black paint need?

Plan on a gray or tinted primer plus two finish coats for even, streak-free coverage.