Home Improvement

Valspar White Paint Colors: Warm, Cool and Bright White Picks

Valspar White Paint Colors: Warm, Cool and Bright White Picks

Most people who repaint a room in white end up sampling three or four “plain” whites and discovering they all look different on the wall. That is especially true with Valspar white paint colors, because the brand’s popular whites range from a crisp, cool bright white to soft, creamy shades that lean toward beige in low light. Picking well comes down to two numbers and one word: the light reflectance value (LRV), the undertone, and the direction your room faces.

For a soft, warm white that works almost anywhere, Dove White (7002-7) and Du Jour (7002-6) are the safest starting points. For a clean, cooler white that suits trim, ceilings and modern kitchens, look at Ultra White (7006-24) or Bistro White (7006-4). If you want noticeable cream or vintage warmth, Antique White (7002-20) and Cozy White (3008-10C) carry more color. And if you just want a ready-mixed bright white paint off the shelf, Valspar sells a product called The Perfect White, which is a paint and primer rather than a tinted color chip.

Every LRV quoted here comes from Valspar’s own color pages at the time of writing. Color availability varies by where you buy, and formulas get updated, so check the current chip or color page before you commit to a full gallon.

Valspar White Paint Colors at a Glance

LRV runs from 0 (absorbs all light) to 100 (reflects all light). Most interior whites land between about 75 and 94. Higher numbers look brighter and cleaner; lower numbers show more color and feel softer. The undertone column uses Valspar’s own warm or cool label.

Color Code LRV Undertone Best use
Ultra White 7006-24 93.6 Cool Ceilings, trim, crisp modern rooms
Du Jour 7002-6 86.0 Warm Whole-house walls, open plans
Dove White 7002-7 85.1 Warm Living rooms, bedrooms, cabinets
Bistro White 7006-4 84.8 Cool Kitchens, baths, south-facing rooms
Antique White 7002-20 80.4 Warm Traditional rooms, cozy spaces
Cozy White 3008-10C 79.8 Warm North-facing rooms, bedrooms
Wispy White 7006-1 74.9 Warm Walls that need visible softness
The Perfect White (product) Ready-mixed Not published Clean bright white Quick refresh of trim, doors, walls

Notice the spread. Ultra White sits almost 19 points higher than Wispy White, and that gap is easy to see side by side. The middle of the pack, from roughly 80 to 86, is where most homeowners end up for walls, because those shades look white without glaring under bright daylight.

Warm Valspar Whites

Warm whites carry a hint of yellow, cream or red-orange. They flatter wood floors, brass hardware, beige stone and most skin tones, and they keep north-facing rooms from feeling gray and flat.

Dove White (7002-7)

Dove White is one of the most requested shades in the line. Valspar lists it as a warm white with an LRV of about 85, so it reads bright but never stark. On walls it looks like a gentle, slightly creamy white; on cabinets it softens the box look of flat-panel doors. One naming trap catches a lot of shoppers: another major paint maker sells a well-known color called White Dove. The two names sound almost identical, but they are separate formulas from separate companies, so give the store the Valspar code (7002-7) rather than the name alone.

Du Jour (7002-6)

Du Jour sits right next to Dove White on the same strip and is a touch lighter, at about 86. Many painters treat it as the “invisible” white: warm enough not to look clinical, light enough to bounce daylight around an open floor plan. It is a strong pick if you want one wall color for the whole main floor.

Antique White (7002-20)

With an LRV near 80, Antique White shows more cream. That extra pigment helps in rooms with heavy trim, wainscoting or traditional furniture, where a brighter white could look thin. In a room flooded with afternoon sun, though, it can drift toward pale yellow, so test it on the sunniest wall first.

Cozy White (3008-10C)

Cozy White is listed in Valspar’s 2023 Color of the Year collection, and its LRV is just under 80. It has a soft, warm, slightly blush quality that reads as white in bright light and as a pale warm neutral in the evening. North-facing bedrooms and reading rooms suit it well.

Wispy White (7006-1)

Wispy White is the darkest white in this group at about 75. Think of it as a white for people who secretly want a very pale beige. It hides scuffs better than bright whites and pairs well with natural wood and woven textures.

Cool and Crisp Valspar Whites

Cool whites lean slightly gray, green or blue. They look sharp next to black hardware, marble-look counters, gray tile and stainless appliances.

Ultra White (7006-24)

Ultra White is the brightest shade on this list at about 93.6 and carries a cool label. That makes it a natural choice for ceilings and for trim against warmer wall colors, where you want the edge to look clean and deliberate. On every wall of a sunny room it can feel stark, so many homeowners use it as an accent white rather than the main wall color.

Bistro White (7006-4)

Bistro White comes in at about 84.8 with a cool undertone. It is less blinding than Ultra White and has a soft, fresh look in kitchens and bathrooms. South- and west-facing rooms, which get warm, golden light, often look best with a cooler white like this one because the light itself adds the warmth.

Neutral-Reading Picks and The Perfect White

Valspar labels its whites as warm or cool, but a few of them read close to neutral on real walls. Du Jour and Dove White carry only gentle warmth, so in balanced, east-facing or mixed light they tend to look like plain white rather than cream. Bistro White does the same thing from the cool side: the gray is subtle enough that it rarely reads as blue. If you want “just white” without a strong lean, start your sampling with those three.

The Perfect White is different from everything else here. It is a ready-mixed paint and primer product, not a tinted color chip, and Valspar sells it for interior and exterior use in satin and semi-gloss. The manufacturer’s page lists coverage of roughly 300 to 400 sq ft per gallon, two coats, and a recoat window of about 2 to 4 hours under normal conditions. Because it does not have a published color code or LRV on that page, treat it as a convenient bright white for trim, doors and touch-ups, and sample it beside your existing whites if you are matching anything.

Looking to buy Valspar White Paint Colors? Compare top-rated options.
Shop on Amazon →Browse Our Shop
As an Amazon Associate we earn from qualifying purchases.

How to Choose the Right Valspar White

Valspar white paint colors are easy to narrow down once you know your light, and the same chip can look completely different in two rooms of the same house. Work through these steps before you buy more than a sample.

  1. Check which way the room faces. North light is cool and flat, so warmer whites such as Cozy White or Antique White help. South and west light is warm, so cooler or balanced whites such as Bistro White or Du Jour hold up better.
  2. Look at what is staying. Floors, countertops, tile and large furniture set the undertone. Honey oak and warm stone point to warm whites. Gray tile, white marble-look quartz and black fixtures point to cool or balanced whites.
  3. Narrow to three candidates. Pick one warm, one balanced and one cool option from the table. Comparing three is easier than comparing eight.
  4. Sample big. Peel-and-stick paint sample swatches are the easiest way to compare whites, because you can move them between walls and rooms without painting test patches. If you paint samples instead, brush at least a 2 ft by 2 ft square on primed or white board.
  5. Judge at three times of day. Look in the morning, mid-afternoon and under your evening lamps. A white that looks perfect at noon can turn yellow under warm bulbs.
  6. Compare against true white. Hold a sheet of printer paper next to each sample. The paper exaggerates undertones and shows you which way each paint leans.

Choosing Sheen and Pairing Trim With Walls

Sheen changes how a white reads almost as much as the color does. Flat and matte finishes hide wall flaws and make whites look softer and slightly darker. Eggshell and satin are the usual wall picks because they wipe clean while keeping a low glow. Semi-gloss suits trim, doors and cabinets, where durability matters and a bit of shine helps define edges.

For trim, you have two good routes. The simplest is to use the same white as the walls in a higher sheen, which gives a calm, continuous look that suits small rooms. The second is to pair a warm wall white with a cleaner, cooler white on trim, for example Dove White walls with Ultra White trim. The contrast is subtle but makes the woodwork look crisp. Avoid pairing two whites with clashing undertones of similar brightness, such as a creamy wall with a slightly different creamy trim; that combination tends to make one of them look dingy.

Ceilings usually look best in a bright, flat white. Ultra White in a flat finish works over most of the warmer wall whites, because ceilings receive less direct light and naturally look a shade darker than the walls.

Troubleshooting Common White Paint Problems

  • The white looks yellow. Warm light plus a warm white doubles up. Switch to a cooler or more balanced option, or change bulbs to a neutral 3000K to 3500K color temperature.
  • The white looks gray or cold. North light or heavy shade is pulling it down. Move to a warmer white with a slightly lower LRV, such as Cozy White.
  • The new white makes the old trim look dirty. Your trim is probably a warmer or older white. Repaint the trim in a clean white, or pick a wall color that shares the trim’s undertone.
  • Patchy, uneven coverage. White over a darker color often needs a primer coat first, then two finish coats. Bright whites are thin on pigment and show lap marks if you roll over partly dried paint, so keep a wet edge.
  • Touch-ups show. Touch-ups flash when the sheen or batch differs. Use paint from the same can, feather the edges with a small roller, and repaint wall to wall if a spot still shows.

Cost, Coverage and When to Hire a Painter

Valspar interior paint generally runs in the mid-price range for big-box paint, with most gallons landing somewhere around $30 to $60 depending on the product line and sheen. A gallon covers about 300 to 400 sq ft per coat, so a typical 12 ft by 14 ft bedroom with 8 ft ceilings needs about 2 gallons for two coats on the walls. Sample swatches and sample pots cost a few dollars each and are the cheapest insurance in the whole project.

DIY painting a bedroom usually takes a weekend. Hiring a professional painter for the same room often runs a few hundred dollars and up, depending on your region, wall condition, trim detail and ceiling height. Consider a pro when walls need significant patching, when you are painting stairwells or ceilings above about 10 ft, or when you want sprayed cabinets with a factory-smooth finish. Homes built before 1978 may have lead paint under the current layers; test before you sand or scrape, and use lead-safe practices or a certified contractor if the test is positive.

Whichever of these Valspar white paint colors you pick, ventilate the room while painting and drying, keep cans sealed between coats, and store leftover paint for touch-ups with the color code written on the lid.

Frequently Asked Questions

Dove White (7002-7) is one of the most requested Valspar whites because its gentle warmth and LRV of about 85 suit most rooms. Du Jour (7002-6) is a close alternative that is a touch lighter and very versatile for whole-house use.

Is Valspar Dove White the same as White Dove?

No. Valspar Dove White and the similarly named White Dove from another paint maker are different colors with different formulas. Use the Valspar code 7002-7 when you buy, and compare samples side by side if you are trying to match one to the other.

What is the brightest Valspar white for trim and ceilings?

Of the colors covered here, Ultra White (7006-24) has the highest LRV at about 93.6 and a cool undertone, which makes it a clean choice for ceilings and trim. The Perfect White ready-mixed paint is another bright option for trim and doors.

Which Valspar white works in a north-facing room?

Warmer whites with slightly lower LRVs, such as Cozy White (3008-10C) or Antique White (7002-20), counter the cool, flat light of a north-facing room. Very bright cool whites can look gray there.

Is The Perfect White a color or a paint?

It is a ready-mixed paint and primer product sold in satin and semi-gloss for interior and exterior use. It does not carry a color code like the tinted whites, so sample it next to your trim before using it to match existing paint.

How many coats of white paint do I need?

Plan on two finish coats in most cases. Painting white over a dark or strong color usually needs a primer coat first, because white paint has less hiding power over saturated colors.