Home Improvement

Whirlpool Refrigerator Dimensions by Style and Capacity

Whirlpool Refrigerator Dimensions by Style and Capacity

Most fridge returns happen for one reason: the new unit is half an inch too tall for the cabinet opening or the doors hit the wall. Knowing the real whirlpool refrigerator dimensions for each style before you shop saves you from that headache. Whirlpool builds full-size refrigerators that range from about 28 3/4 to 39 3/4 inches wide and roughly 61 3/4 to 71 1/4 inches tall, according to the brand’s own sizing guide, and the depth changes a lot depending on whether the model is standard-depth or counter-depth.

Width is the number that rules most kitchens. Slim top-freezer and bottom-freezer models usually sit in the 28 to 33 inch range, while French door and side-by-side models commonly come in 33 and 36 inch widths. Height matters next if you have an overhead cabinet, and depth decides whether the fridge sits flush with your counters or sticks out past them.

Every model is a little different, so treat these as planning ranges and always confirm against the dimension guide for the exact model number you plan to buy.

Whirlpool Refrigerator Dimensions at a Glance

Here is a quick reference for the main Whirlpool styles. The ranges reflect typical full-size models, not every unit in the lineup.

Style Typical width Typical height Typical depth Notes
Top-freezer 28 3/4 to 32 3/4 in 61 3/4 to 66 1/4 in 28 3/4 to 34 1/2 in Door open to 90 degrees adds about 27 in of depth
Bottom-freezer 29 1/2 to 32 3/4 in 67 to 70 in About 33 3/8 in Roughly 50 in deep with the door open
French door (standard depth) 30, 33 or 36 in classes About 70 in on many 36 in models About 35 1/2 in on a typical 36 in model The deepest style; check door swing carefully
French door (counter-depth) About 35 5/8 in on 36 in models About 70 in About 29 3/8 in on a typical model About 43 in deep with doors open to 90 degrees
Side-by-side 33 or 36 in classes About 69 to 70 in About 30 to 34 in Narrow doors suit tight galley kitchens
4-door French door About 36 in 69 1/2 to 70 1/8 in 28 3/8 to 36 3/8 in Depth depends on counter-depth or full-depth version

One pattern stands out. Counter-depth French door models trade several inches of depth for a little extra height and the full 36 inch width, which is how they keep usable capacity while sitting closer to the cabinet face.

How Capacity Relates to Size

Capacity, measured in cubic feet, tracks closely with width and depth. Whirlpool’s top-freezer refrigerators run from about 10 to 21 cubic feet, and a model just under 30 inches wide can still deliver around 19 cubic feet. Bottom-freezer models typically land between 12 and 22 cubic feet, with the freezer drawer taking roughly one third of the total.

French door and side-by-side models are where you see the larger numbers. A standard-depth 36 inch French door model commonly lands in the mid-20s for cubic feet, while the counter-depth version of the same width usually gives up a few cubic feet in exchange for that shallower profile. Side-by-side capacity varies a lot with width: a 33 inch unit holds noticeably less than a 36 inch unit of the same depth.

As a rough rule, plan on about 4 to 6 cubic feet of fresh and frozen storage per adult in the household. A couple can be comfortable with a compact top-freezer, while a family of five that buys groceries in bulk will feel cramped in anything under about 22 cubic feet.

Style by Style

  • Top-freezer: The narrowest and shortest option, ideal for apartments, older kitchens with 30 inch openings, and garages.
  • Bottom-freezer: Puts fresh food at eye level. Slightly taller than top-freezer units, so check overhead cabinets.
  • French door: Two narrow fresh-food doors over a freezer drawer. The doors need less swing room than a single wide door.
  • Side-by-side: Full-height fresh and freezer sections. Narrow doors work well where an island sits close to the fridge.
  • Counter-depth: Available in French door and side-by-side layouts. The case sits closer to flush with a standard 24 to 25 inch cabinet run, though the doors still extend past it.

Tools You Need to Measure Your Space

You do not need much to get accurate numbers, but you do need to measure more than the obvious opening.

  • A 25 foot tape measure or a laser distance measure for quick, single-person readings of height and depth
  • A pencil and notepad, or your phone, to record every measurement
  • A small level to check whether the floor slopes in the opening
  • A flashlight to find the water shutoff and outlet behind the old unit

A laser distance measure is handy here because you can shoot from the back wall to the counter edge without someone holding the other end of a tape. It also makes doorway and hallway measurements along the delivery path go faster.

How to Measure for a New Whirlpool Refrigerator

  1. Measure the opening width. Take the width at the top, middle and bottom of the opening and use the smallest number. Cabinets are rarely perfectly square.
  2. Measure the height. Go from the floor to the underside of the overhead cabinet at the front and back. If the floor slopes, use the shorter reading.
  3. Measure the depth. Measure from the back wall to the front edge of the countertop, not the cabinet door. Note where the outlet and water valve stick out from the wall.
  4. Add clearances. Whirlpool guidance generally calls for about 1/2 inch on each side and on top, and about 1 inch behind the cabinet. Some models ask for 2 inches behind, so read your model’s guide.
  5. Check door swing. If one side of the fridge sits against a wall, many Whirlpool models need roughly 3 3/4 inches between the hinge side and the wall so the doors open far enough to pull out crisper drawers. The exact figure varies by model.
  6. Measure the delivery path. Measure every doorway, hallway and turn from the curb to the kitchen. Remember that doors and handles can often be removed to get a wide model through a tight entry.
  7. Compare against the model’s dimension guide. Use the overall height including hinges, the depth with and without handles, and the depth with doors open to 90 degrees.

A common mistake is reading depth “without doors” or “without handles” and assuming the fridge will be flush. Listed depth figures often exclude handles, which can add a couple of inches in front.

Cutout and Clearance Guidelines

Your cutout is the finished opening between cabinets or between a cabinet and a wall. For a 36 inch class French door or side-by-side model, a 36 inch cutout is the usual target, with the actual case a little narrower so you get the side air gap. For 30 and 33 inch class models, plan cutouts of 30 and 33 inches respectively, again confirming the exact case width on the dimension guide.

Height is where many kitchens get tight. Older homes often have overhead cabinets mounted for refrigerators in the 66 inch range. A 70 inch tall French door model will not fit those openings without lifting or replacing the upper cabinet. If you want extra breathing room, some Whirlpool guides suggest about 3 inches between the refrigerator top and overhead cabinets.

Ventilation is not optional. Refrigerators shed heat through the back and bottom, and cramming one into a zero-clearance opening forces the compressor to run longer. That raises energy use and can shorten compressor life. Keep the unit away from ovens, radiators and heat registers, and avoid placing it where room temperatures fall under about 55 degrees F, such as an unheated garage in winter, unless the model is rated for it.

Looking to buy Whirlpool Refrigerator Dimensions by Style and Capacity? Compare top-rated options.
Shop on Amazon →Browse Our Shop
As an Amazon Associate we earn from qualifying purchases.

Installation Tips and Safety

Plug the refrigerator directly into a properly grounded wall outlet. Avoid extension cords and power strips, which can overheat under the startup load of a compressor. If the outlet is damaged, loose or missing a ground, have an electrician fix it before installing the new unit.

For models with an ice maker or water dispenser, shut off the water supply valve before disconnecting the old line, and have a towel and bucket ready to catch residual water. Use a new braided or copper supply line rather than reusing an old plastic one. If there is no shutoff valve, or the existing valve leaks or will not close, call a licensed plumber.

Moving a full-size refrigerator is a two-person job at minimum. Use an appliance dolly, strap the unit to it, and protect the floor with hardboard or plywood sheets. Hardwood, vinyl plank and laminate floors scratch and dent easily under the concentrated weight of a fridge on its leveling feet or rollers.

Once in place, level the unit front to back and side to side using the front leveling legs. Many manufacturers recommend tilting the cabinet slightly back so the doors swing closed on their own. Let the refrigerator run for several hours before loading food so it reaches its set temperature.

Troubleshooting Fit Problems

The fridge is too tall for the cabinet. If you are off by less than half an inch, lowering the leveling legs may help. Otherwise you will need to raise or remove the overhead cabinet, or pick a shorter model.

The doors hit the wall or an island. Check whether the doors are reversible on your model, which lets you swap the hinge side. On French door models this is not an option, so look for a model with a smaller door-swing requirement or move the fridge farther from the wall.

The fridge sticks out past the counters. This is normal for standard-depth units, which often project several inches. A counter-depth model reduces the projection, though the doors and handles still extend past the cabinet faces.

The crisper drawers will not open fully. This happens when the hinge side is too close to a wall. The doors must open past 90 degrees for many drawers to slide out, which is why the door-swing clearance in the dimension guide matters so much.

Typical Costs to Plan For

Whirlpool positions itself as a mid-priced brand. As a general guide, compact top-freezer models usually cost the least, often a few hundred dollars to around a thousand. Bottom-freezer and side-by-side models usually fall in the low-to-mid four figures. French door and counter-depth French door models sit at the higher end of the lineup, often in the mid four figures depending on features. Delivery, haul-away and installation of a water line may add a modest fee, and cabinet modifications to accommodate a taller unit can cost several hundred dollars or more depending on carpentry and finish work.

When to Call a Pro

Call a cabinet installer or carpenter if the new refrigerator needs a wider or taller opening. Cutting into cabinets, removing an overhead unit, or moving a pantry wall is finish carpentry that affects the look of your whole kitchen. Bring in a licensed plumber for new water line runs, and a licensed electrician if you need a new dedicated outlet or circuit. Most delivery crews can handle the connection of an existing water line, so ask when you schedule.

Frequently Asked Questions

How wide is a standard Whirlpool refrigerator?

Most full-size Whirlpool refrigerators fall between about 28 3/4 and 36 inches wide. Top-freezer and bottom-freezer models are usually under 33 inches, while French door and side-by-side models often come in 33 and 36 inch widths.

How tall are Whirlpool French door refrigerators?

Many 36 inch Whirlpool French door models are close to 70 inches tall to the top of the hinge. Always confirm the exact figure, since some counter-depth models run a little taller to make up for reduced depth.

What is the depth of a Whirlpool counter-depth refrigerator?

A typical Whirlpool counter-depth French door model measures roughly 29 to 31 inches deep including the doors, compared with roughly 35 inches for many standard-depth models of the same width.

How much clearance does a Whirlpool fridge need?

Plan on about 1/2 inch on each side and on top and about 1 inch at the back, plus extra space on the hinge side if the fridge sits next to a wall. Some models call for more, so check the installation instructions for your unit.

Do Whirlpool refrigerator dimensions include the handles?

Depth figures are often listed both with and without handles, and some spec sheets exclude handles entirely. Compare the “depth with handles” and “depth with door open” figures before deciding whether a model fits your space.