Most homeowners overestimate what a broken window will cost, because they picture a full replacement. The typical window repair cost runs from about $100 to $600 per window, and many hardware fixes land well under $250 with labor included. The expensive outliers are large double-pane units, custom shapes, and rotted wood sashes that need carpentry.
Part of our Windows & Doors guide — explore the full guide →
Price depends on three things: what failed (glass, seal, hardware or frame), the size and type of the window, and whether a technician can fix it on site or has to order a custom part. A cracked single pane in a small wood sash is a quick job. A fogged insulated glass unit in a large picture window needs measuring, ordering and a second visit.
- Window Repair Cost by Fix Type
- Glass Repairs: Cracked Panes and Broken Insulated Units
- Foggy Glass and Failed Seals
- Hardware Repairs: Balances, Cranks, Locks and Weatherstripping
- Sash Rot and Frame Damage
- How to Reglaze a Single-Pane Sash Yourself
- Glass Handling Safety
- Troubleshooting Before You Call
- When Replacing the Window Wins
- When to Call a Pro
- Frequently Asked Questions
Repair usually beats replacement when the frame is sound and only one component has failed. Once several problems stack up on the same window, or the frame itself is rotted or warped, the math starts to favor a new unit.
Window Repair Cost by Fix Type
The table gives general installed ranges for the most common repairs on standard residential windows. Large, tempered, laminated, low-E coated or custom-shaped glass pushes any glass job toward the top of its range or past it.
| Repair | Typical pro cost | DIY parts cost | Repair or replace? |
|---|---|---|---|
| Cracked single-pane glass | $100 to $400 | $20 to $80 | Repair |
| Broken double-pane glass (new insulated unit) | $200 to $700 | Not a DIY job | Repair if frame is sound |
| Failed seal, foggy glass | $150 to $600 | Not a DIY job | Repair, unless many units have failed |
| Sash balance or spring | $100 to $300 | $15 to $60 | Repair |
| Casement crank operator | $75 to $250 | $15 to $50 | Repair |
| Glazing putty and reglazing a sash | $75 to $250 per sash | $10 to $30 | Repair |
| Minor sash rot (epoxy fill) | $150 to $500 | $30 to $80 | Repair |
| Severe sash or frame rot | $400 to $1,000 or more | Varies | Often replace |
| Locks, latches and weatherstripping | $75 to $200 | $10 to $40 | Repair |
Many window repair companies also charge a trip or service fee of roughly $50 to $150, which is often waived or folded into the job if you approve the work. Ask about it on the phone, and if you have more than one window with a problem, bundle them into a single visit so you pay that fee once.
Glass Repairs: Cracked Panes and Broken Insulated Units
Single-pane glass is the cheapest window repair there is. Older wood windows and storm sashes use a single sheet of glass held in with glazier’s points and putty, and a technician can cut and set a new pane in under an hour for most sizes. If you are comfortable handling glass, the parts cost is small: a pane cut to size, a handful of points, and a can or tub of glazing putty.
Double-pane windows are different. The two sheets of glass are sealed together with a spacer and gas fill into one insulated glass unit (often called an IGU). You cannot replace one sheet. The whole unit is measured, ordered from a glass shop, and swapped into the existing sash or frame. That is why a broken pane in a modern vinyl window can cost two or three times as much as one in a 1950s wood window, even when the opening is the same size.
Glass type adds cost quickly. Tempered safety glass is required by code in many locations, such as near doors, in bathrooms and close to the floor, and it costs more than standard annealed glass. Low-E coatings, laminated glass, obscure (textured) glass and grids between the panes all raise the price of a replacement unit.
Foggy Glass and Failed Seals
Condensation or a milky haze trapped between the two panes means the seal has failed and moist air has entered the unit. Wiping will not help because the moisture is inside. The window still keeps out rain, but the insulating value drops and the haze usually gets worse over time.
The standard fix is a new insulated glass unit installed in the existing frame, which typically falls in the $150 to $600 range per opening. Some companies offer a defogging service that drills small holes, dries the cavity and seals it again; it costs less, but it does not restore the original gas fill and results vary. Before paying either, check your paperwork: many window manufacturers cover seal failure for years, sometimes for the life of the original owner, and the glass may be covered even when labor is not.
Hardware Repairs: Balances, Cranks, Locks and Weatherstripping
Hardware failures are the most common reason a window stops working, and they are among the cheapest to fix. A double-hung sash that will not stay up, or that slams down, usually has a broken balance. Modern windows use spring, spiral or block-and-tackle balances that sit in the side jambs; older wood windows use sash weights and cords hidden behind a pocket cover.
Replacing a pair of balances is a manageable DIY job once you identify the type and size, which is usually printed on the old balance. A pro will typically charge $100 to $300 per window. Restoring old sash cords costs a bit more because the stop molding and pocket covers have to come off carefully.
Casement windows open with a crank operator. Stripped gears, a broken handle or a bent arm can all be fixed by swapping the operator, a part that often costs less than a pizza. Locks, latches and worn weatherstripping fall in the same low-cost category, and replacing tired weatherstripping is one of the cheapest ways to stop drafts.
Sash Rot and Frame Damage
Wood rot is where window repair cost can climb. Small soft spots on a sill or the bottom rail of a sash can be dug out, treated with a wood consolidant, and filled with a two-part epoxy filler, then primed and painted. That kind of repair usually lands between $150 and $500 depending on how much area is affected.
Once rot runs through the sill, into the jamb, or across most of a sash, a carpenter has to replace wood sections or build a new sash. That work can exceed $1,000 for a single window, and it reaches the point where a new window costs about the same and performs better. Always look for the source of the water too: failed caulk, a missing drip cap or a clogged gutter will rot the new wood just as quickly.
How to Reglaze a Single-Pane Sash Yourself
Old putty that is cracked, missing or falling out lets water reach the wood and loosens the glass. Reglazing is a slow, satisfying job and a good place to save money. A window glazing putty made for the purpose, along with a few basic tools, is all you need.
- Remove the sash if possible and lay it flat on a padded work surface. Wear cut-resistant gloves and safety glasses the whole time.
- Soften old putty with a heat gun on low or a putty softener, then remove it with a stiff putty knife. Pull out the old glazier’s points.
- If the glass is cracked, lift it out carefully and take measurements of the opening. Have the new pane cut about 1/8 inch smaller than the opening in both directions.
- Scrape and sand the rabbet (the recess the glass sits in), then prime bare wood so it does not pull oil from the new putty.
- Lay a thin bead of putty in the rabbet as a bed, press the glass in gently and evenly, and set new points every 6 to 8 inches.
- Roll putty into a rope, press it along the edge, and tool it to a smooth 45 degree bevel with a putty knife.
- Let the putty skin over for the time listed on the label (often several days to a couple of weeks), then paint, lapping the paint slightly onto the glass to seal the joint.
Glass Handling Safety
Broken glass causes deep cuts, so treat every pane as sharp. Wear cut-resistant gloves, long sleeves and safety glasses when removing broken glass, and tape across a cracked pane before you remove it to hold the pieces together. Never flex a sheet of glass, strike its edges, or carry it flat; carry it vertically, and use two people for anything larger than you can hold comfortably at your side.
Replacement glass in hazardous locations, such as panes near doors, tubs and showers or close to the floor, generally has to be tempered safety glass. A glass shop will know your local rules. Large panes, upper-story windows and anything that requires working from a ladder are good reasons to hire a pro.
Troubleshooting Before You Call
- Sash will not stay open: check the balances first. A detached balance shoe is sometimes just unhooked and can be reset for free.
- Window is hard to open: clean and lubricate the tracks with a dry silicone spray, and check for paint sealing the sash to the stops.
- Draft with the window closed: inspect weatherstripping and confirm the lock pulls the sashes tight together.
- Water on the sill inside: look for clogged weep holes on the exterior frame and failed exterior caulk before blaming the glass.
- Haze between panes: a failed seal; check the warranty before ordering a new glass unit.
When Replacing the Window Wins
Replacement makes more sense than repair when the frame is rotted or warped, when several components have failed at once, or when repair quotes approach the cost of a new window. A standard vinyl replacement window commonly runs about $400 to $1,200 installed, with larger, wood or specialty units costing more. If a house has many single-pane windows, energy savings and comfort can also justify upgrading the whole house over time rather than repairing one window at a time.
A practical rule: if the repair costs more than half of a comparable new window and the window is more than 20 years old, get a replacement quote too. Historic homes are the exception, since original wood windows are often worth restoring and some local historic districts restrict replacement.
When to Call a Pro
Call a window repair company or glass shop for any double-pane unit, any tempered or laminated glass, large picture windows, upper-floor windows and anything involving structural rot. Get two or three written quotes that list the part, glass type and labor separately, and ask whether the work carries its own warranty.
Frequently Asked Questions
How much does it cost to fix a broken window?
Most broken window repairs cost $100 to $600. A single-pane crack sits at the low end, while a new insulated glass unit for a large double-pane window sits at the high end or beyond it.
Is it cheaper to repair or replace a window?
Repair is usually cheaper when the frame is sound and only the glass or hardware has failed. Replacement wins when the frame is rotted, several parts have failed, or the repair approaches half the cost of a new window.
Can I replace just one pane of a double-pane window?
No. The two panes are sealed together as one insulated unit, so the whole unit is replaced while the existing frame and sash stay in place.
What is the cheapest way to repair a window?
Hardware and putty repairs are the cheapest. Replacing a balance, a crank operator or worn weatherstripping, or reglazing a sash yourself, often costs under $60 in parts.
Does homeowners insurance cover window repair?
Insurance may cover windows broken by a covered event such as a storm or break-in, minus your deductible. Wear and tear, failed seals and rot are generally not covered.