Most homeowners expect a quote to replace their old wood windows, then find out that fixing them can cost less and last longer. The typical window restoration cost for a standard double-hung wood window falls somewhere between $300 and $1,200 when a professional does the full job, and the spread depends almost entirely on how much rot, broken glass and paint buildup the sash is carrying.
Part of our Windows & Doors guide — explore the full guide →
A light tune-up (new glazing putty in a few spots, freed-up sashes, fresh weatherstripping) can land at the low end. A window that needs full paint stripping, epoxy consolidation of rotted sills, new sash cords and replacement glass climbs toward the top of the range, and a few historic or oversized units go higher still. Compare that with roughly $600 to $1,500 or more per opening for a quality replacement window installed, and restoration often wins on cost and on keeping original old-growth wood in place.
- Window Restoration Cost by Repair Type
- What Drives the Price Up or Down
- Restoration vs Replacement: Which Costs Less Over Time?
- Materials and Tools for a DIY Restoration
- How a Typical Restoration Job Goes, Step by Step
- Safety: Lead, Asbestos and Glass Handling
- Troubleshooting Common Problems
- When to Call a Pro
- Frequently Asked Questions
All prices here are national ballpark ranges for 2026. Local labor rates, access (second-story windows cost more), and the number of windows in the job all shift the final number, so treat these as planning figures rather than a bid.
Window Restoration Cost by Repair Type
Restoration is really a bundle of separate repairs. Contractors usually price each window after inspecting it, but the line items look similar from shop to shop. Here is how the main tasks break down per sash or per window.
| Repair | Typical pro cost | DIY materials | What it fixes |
|---|---|---|---|
| Reglazing (new putty, per sash) | $100 to $300 | $15 to $30 | Cracked, missing putty; rattling panes; water entry |
| Paint stripping (per window) | $150 to $400 | $30 to $60 | Heavy paint buildup, stuck sashes, failing finish |
| Sash cord replacement (per window) | $75 to $200 | $10 to $25 | Broken cords, sashes that slam or won’t stay open |
| Weatherstripping (per window) | $75 to $250 | $15 to $50 | Drafts, air leaks, rattles |
| Epoxy rot repair (per area) | $100 to $400 | $30 to $70 | Soft or punky sills, sash bottoms, joints |
| Replace a broken pane | $75 to $250 | $20 to $60 | Cracked or missing glass |
| Full restoration (per window) | $300 to $1,200 | $75 to $200 | Every repair in this list, as needed |
| Replacement window, installed | $600 to $1,500+ | Not typical DIY | Whole unit swapped out |
Two patterns stand out. Labor dominates the bill, since the materials for even a full restoration rarely top a couple hundred dollars. And the per-window cost drops when you restore a whole house at once, because the crew sets up stripping and glazing stations once and works through the sashes in batches.
What Drives the Price Up or Down
Condition of the wood
Sound wood with a failing finish is the cheapest scenario. Once rot reaches the sill, the bottom rail of the sash, or the joints where rails meet stiles, the work shifts from cosmetic to structural. Small soft spots get consolidated and filled with a two-part wood epoxy filler. Larger losses may need a wood “dutchman” patch or a new sill piece milled to match, which can add $200 to $500 or more to that one window.
Layers of paint
Old windows often carry ten or more coats of paint, which glue sashes shut and hide rot. Stripping by heat, infrared or chemical stripper takes time, and in older homes it also triggers lead-safe work practices, which add labor and cleanup costs.
Glass
Wavy original glass is part of the appeal, and careful restorers remove and reuse it. Replacing a broken pane with modern float glass is inexpensive. Sourcing reclaimed or restoration glass to match the original look costs more.
Access and quantity
First-floor windows that can be pulled and worked on in a shop are the most efficient. Upper-story windows need ladders or staging and more handling time. Ordering ten or more windows at once usually lowers the per-window price, while a single window may carry a minimum trip charge.
Storm windows
Many restorers recommend pairing restored sashes with interior or exterior storm windows. Expect roughly $150 to $500 per opening for decent storms, depending on style and whether they are custom sized. Together, a restored sash and a good storm can approach the energy performance of a typical replacement double-pane unit.
Restoration vs Replacement: Which Costs Less Over Time?
Upfront, a well-done restoration and a mid-range replacement can look close. The difference shows up over the decades. Original sashes milled from dense, old-growth lumber can last another 50 years or more with periodic glazing and paint. Many vinyl replacement units have a useful life closer to 20 to 30 years, and once the insulated glass seals fail, the fog between the panes usually means replacing the unit or the glass package.
Restoration makes the most sense when:
- The frames and most of the sashes are structurally sound, even if they look rough.
- The house is historic or in a district with design review, where replacements may not be approved.
- You value the original sightlines, wavy glass and proportions that replacement units rarely match.
- You are willing to add storm windows for efficiency.
Replacement tends to win when the frames themselves are badly rotted, when the window openings are already non-original, or when you need features like tilt-in cleaning on high floors and egress sizing in bedrooms. Getting quotes for both on the same window is the most reliable way to decide.
Materials and Tools for a DIY Restoration
Handy homeowners can cut the window restoration cost dramatically by doing the work themselves, especially reglazing and weatherstripping. A basic kit looks like this:
- Glazing putty (linseed oil or modern acrylic glazing compound) and glazier’s points
- Putty knife, stiff 5-in-1 tool and a glazing knife
- Heat gun or infrared paint remover, plus scrapers
- Two-part wood epoxy consolidant and wood epoxy filler for rotted areas
- Replacement sash cord (cotton or poly braided) or chain
- Weatherstripping (spring bronze, foam or silicone bulb, depending on the window)
- Exterior oil-based or quality acrylic primer and paint
- Cut-resistant gloves, safety glasses, a HEPA vacuum and plastic sheeting
How a Typical Restoration Job Goes, Step by Step
- Test for lead and plan containment. Any home built before 1978 should be tested before you scrape, sand or heat old paint. If lead is present, use lead-safe work practices or hire a lead-safe certified contractor.
- Remove the sashes. Pry off the interior stop, swing out the lower sash, and detach the cords. Remove the parting bead to free the upper sash.
- Remove the glass. Soften old putty with gentle heat, pull the glazier’s points, and lift the panes out. Wear gloves and eye protection, carry glass vertically, and never flex or strike the edges.
- Strip and repair. Remove failing paint, then treat soft wood with epoxy consolidant and rebuild missing material with epoxy filler. Sand the filler flush once it cures.
- Prime and reglaze. Prime the glazing rabbets, bed the glass, set new points and tool fresh putty. Linseed putty needs days to weeks to skin before painting; follow the label.
- Restring and weatherstrip. Replace sash cords, check the weights, and add weatherstripping at the meeting rail, sides and bottom.
- Paint and reinstall. Paint with a slight lap onto the glass to seal the putty, then reinstall the sashes and stops.
Plan on 6 to 12 hours of hands-on time per window for a first-timer doing a full job, spread over several days because putty, epoxy and paint all need cure time.
Safety: Lead, Asbestos and Glass Handling
Older windows carry real hazards. Paint applied before 1978 frequently contains lead, and window friction surfaces are among the worst sources of lead dust in a home. Test first, mist surfaces to keep dust down, avoid dry sanding and open-flame burning, contain the area with plastic, and clean up with a HEPA vacuum and wet wiping. Some older glazing compounds and caulks contain asbestos, so have suspect putty from pre-1980s work tested before you scrape large amounts of it.
Glass needs respect too. Use cut-resistant gloves and safety glasses, keep a clear path when carrying panes, and get help with large sashes. Never pry against the glass, and discard any pane with chipped edges, since it can crack unpredictably. If a replacement pane sits in a door, near the floor, or in a bathroom, local code may require tempered or safety glass, which a glass shop can cut to size.
Troubleshooting Common Problems
- Sash still sticks after stripping: Check the stops and parting bead for paint buildup, and wax the channels with paraffin.
- New putty cracks within a season: The rabbet probably was not primed, or the putty was painted too early or too late. Prime bare wood and follow the cure window on the label.
- Window rattles: Add or adjust weatherstripping at the meeting rails and confirm the sash lock pulls the rails together.
- Drafts around the frame: Seal gaps between the casing and wall, and consider a storm window, since the frame and weight pockets often leak more than the sash.
- Epoxy patch shows through paint: Sand it flush, spot-prime, and feather the paint.
When to Call a Pro
Hire a window restoration specialist when lead tests positive and you are not set up for lead-safe work, when rot has reached the frame or sill structure, or when windows are on a second story or higher. Professionals also make sense for whole-house projects, where their shop setup and batch workflow keep the per-window price reasonable. Ask for references, photos of past jobs, proof of insurance, and lead-safe certification for any home built before 1978.
When comparing bids, make sure each one specifies the same scope: stripping method, glazing compound, rot repair approach, sash cord material, weatherstripping type and paint system. A low window restoration cost on paper sometimes leaves out stripping or rot repair, and those items are what make the work last.
Frequently Asked Questions
Is it cheaper to restore or replace old wood windows?
Often it is cheaper to restore, especially when the frames are sound. A full restoration typically runs about $300 to $1,200 per window, while a quality replacement window installed often costs $600 to $1,500 or more, and restored windows can last for decades with routine maintenance.
How long does it take to restore one window?
A professional shop may spend 4 to 10 hours of labor on a typical double-hung window. Because putty, epoxy and paint need cure time, the window may be out of service for several days to a couple of weeks.
Can I reglaze windows myself to save money?
Yes. Reglazing is one of the most approachable DIY tasks, with materials costing about $15 to $30 per sash. Test for lead first if the house was built before 1978, and practice on a spare sash if you can.
Do restored windows save energy?
Restored sashes with good weatherstripping cut drafts considerably. Adding a well-fitted storm window brings performance much closer to that of a typical double-pane replacement.
What is the most expensive part of window restoration?
Labor for paint stripping and rot repair usually drives the cost. Windows with heavy paint buildup or rot at the sill and joints cost the most to restore.