Bathroom Vanity Sizes Chart: Complete Guide for Homeowners

Ordering a vanity that is two inches too wide or blocks the door swing is a mistake that surfaces only after delivery, when it is far too late and far too expensive to fix. A clear bathroom vanity sizes chart takes the guesswork out of the process by laying out the standard widths, depths, and heights so you can match a vanity to your space on the first try. This guide gives you the full reference chart, explains how to measure your bathroom correctly, and walks through the clearances that determine whether a given size will actually work.

Part of our Bathroom Remodeling & Flooring guide — explore the full guide →

Bathroom Vanity Sizes Chart: Standard Vanity Widths

Width is the dimension that varies most and matters most, since it determines whether you get one sink or two and how much counter and storage you have. Vanities come in predictable stock widths:

• 18 to 24 inches: compact single-sink units for powder rooms and tight half-baths
• 30 to 36 inches: the most common single-sink sizes for standard full bathrooms
• 42 to 48 inches: larger single-sink vanities with generous counter and storage, or a tight double
• 60 to 72 inches: standard double-sink vanities for primary bathrooms

As a rule, you need at least 48 inches of width before a double-sink vanity makes sense, and 60 inches for two sinks to feel comfortable rather than cramped. Below 30 inches you are in powder-room territory, where the goal is simply a functional sink with minimal storage.

Standard Vanity Depths

Depth is measured from the wall to the front of the cabinet, and most vanities cluster around a few standard figures:

• 21 to 22 inches: the standard depth for a full-size vanity, giving a comfortable counter and roomy cabinet
• 18 inches: a shallow or “narrow-depth” vanity for small bathrooms and tight walkways
• 15 to 16 inches: extra-shallow and floating vanities for very tight or modern spaces

Depth has a big impact on how a small bathroom feels and functions. A standard 21-inch vanity can crowd a narrow room or interfere with a door swing, while an 18-inch narrow-depth model preserves walkway space. Always confirm the depth includes or excludes the countertop overhang, which typically adds about an inch to the front.

Standard Vanity Heights

Vanity height is measured from the floor to the top of the counter, and there are two common standards plus a growing preference for taller cabinets:

• 30 to 32 inches: the traditional “standard” height, comfortable for children and shorter users
• 34 to 36 inches: “comfort height” or “vanity height,” matching kitchen counters and easier on the back for most adults

Comfort-height vanities around 36 inches have become the modern default in primary and adult bathrooms because they reduce the need to stoop. The lower 30- to 32-inch height still makes sense in kids’ bathrooms and where family members are shorter. Remember to account for the countertop and sink thickness, which add to the finished height. A floating (wall-mounted) vanity lets you set any height you like, which is one of its advantages.

The Complete Quick-Reference Chart

Here is the full picture in one place. Use these standard ranges as your starting point:

• Powder room single: width 18-24 in, depth 16-18 in, height 30-36 in
• Standard single: width 30-36 in, depth 21-22 in, height 32-36 in
• Large single: width 42-48 in, depth 21-22 in, height 34-36 in
• Standard double: width 60-72 in, depth 21-22 in, height 34-36 in
• Narrow-depth (small bath): width 24-36 in, depth 18 in, height 32-36 in

These are the stock sizes carried by virtually every manufacturer, so choosing within these ranges keeps you out of custom pricing and makes replacement parts and tops easy to source.

How to Measure Your Bathroom

The chart is only useful once you know your available space. Measure carefully before shopping:

1. Measure the wall width where the vanity will sit, from corner to corner or to any obstruction.
2. Measure the depth available, checking that the vanity will not block the door swing or a walkway.
3. Locate the plumbing, noting how far the water supply and drain sit from the wall and floor.
4. Check the door and drawer clearances, making sure cabinet doors and vanity drawers can open fully.
5. Account for the toilet and shower, confirming code clearances to adjacent fixtures.

Write down every number and bring it shopping. The most common ordering mistake is measuring only the width and forgetting that depth or a door swing rules out the size you wanted.

Required Clearances Around a Vanity

Building codes and simple comfort dictate minimum spaces around a vanity. Keep these in mind so the room stays usable:

• At least 15 inches from the centerline of the sink to any side wall
• At least 21 inches of clear floor space in front of the vanity, with 30 inches preferred
• Enough clearance so the vanity does not interfere with the door swing or block another fixture
• Room to open cabinet doors and drawers without hitting the toilet or tub

These clearances are why a technically-fitting vanity can still be the wrong choice: a 48-inch vanity may squeeze into a 50-inch wall but leave no comfortable elbow room or door clearance. Plan the whole layout, not just the wall the vanity sits on.

Single vs. Double: Making the Call

The single-versus-double decision comes down to width and how the bathroom is used. If your available wall is under 60 inches, a single vanity with a large countertop is almost always the better choice than cramming in two undersized sinks. At 60 inches and above, a double vanity gives two people their own space, which is a real quality-of-life upgrade in a shared primary bath. A common compromise in the 48- to 60-inch range is a single sink with lots of counter and storage on one side, which many homeowners find more practical than two tight sinks.

Vanity Depth and Sink Considerations

Depth deserves a closer look because it interacts with the sink you choose and the comfort of using the vanity. A standard 21-inch-deep vanity comfortably houses a full-size sink and gives you counter room on either side for toiletries. Drop to an 18-inch narrow-depth vanity and your sink options shrink; you will want a shallower or smaller basin so the bowl fits within the cabinet without crowding the faucet. Vessel sinks, which sit on top of the counter, add usable depth inside the cabinet since they do not intrude into it, making them a smart pairing with shallow vanities. Undermount sinks give the cleanest counter but require enough depth to sit fully within the cabinet. Always confirm the sink you want fits the vanity depth before ordering both.

Height and Who Uses the Bathroom

Choosing between standard and comfort height comes down to who uses the space. A 36-inch comfort-height vanity suits most adults and reduces back strain, which is why it dominates primary and guest bathrooms today. But in a children’s bathroom, the taller counter can be hard for young kids to reach, so a 30- to 32-inch standard height, or even a step stool, makes more sense. In an accessible or aging-in-place bathroom, consider the user’s needs specifically, and remember that a wall-mounted floating vanity can be set to any height, including a wheelchair-accessible height with knee clearance below. Match the height to the people, not just to the trend.

The Bottom Line

A bathroom vanity sizes chart turns a stressful guess into a simple lookup: single sinks run 30 to 48 inches wide, doubles need 60 inches or more, standard depth is 21 to 22 inches with narrow options at 18, and comfort height sits around 36 inches. Measure your width, depth, plumbing, and clearances before you shop, respect the 15-inch and 30-inch clearance rules, and choose a single vanity unless you truly have 60 inches for two sinks. Match your space to these standard dimensions and your new vanity will fit perfectly, install cleanly, and function comfortably for years.