Home Improvement

Benjamin Moore Tudor Brown: Undertones, LRV and Pairings

Benjamin Moore Tudor Brown: Undertones, LRV and Pairings

Dark brown paint has quietly come back, and Benjamin Moore Tudor Brown is one of the classic shades people keep returning to. Its official color number is HC-185, it belongs to the Historical Colors collection, and Benjamin Moore lists its light reflectance value (LRV) at 6.43. That puts it firmly in the very dark range, close enough to black that it behaves like a deep neutral, yet warm enough that it still reads as brown in daylight.

Benjamin Moore files the color under its red family and describes it as a deep brown suggestive of quaint European villages. In practice that means a chocolate brown with a reddish, slightly earthy warmth rather than a gray or green cast. It suits front doors, shutters, trim, cabinetry and moody dining rooms far better than it suits a small, dim bedroom.

Benjamin Moore also lists Tudor Brown under the code PM-24 with the same formula, so you may see that code on some swatches and sample cans. It is the same color.

Benjamin Moore Tudor Brown Specs at a Glance

These are the core facts confirmed on the manufacturer’s color page, plus what each one means for your project. Screens vary, so always judge the final color from a physical sample in your own light.

Spec Value What it means
Color name and number Tudor Brown HC-185 (also listed as PM-24) Use HC-185 when ordering; PM-24 refers to the same color
Collection Historical Colors A traditional palette that suits older and classic-style homes
LRV 6.43 (manufacturer’s US page) Very dark; reflects little light and absorbs heat outdoors
Color family Red family on the maker’s site Reads as a warm brown with a reddish lean
Undertone Warm, red-brown Looks richer in warm light, deeper and more neutral in cool light
Best sheens Matte or eggshell for walls; satin or semi-gloss for trim, doors and cabinets Higher sheen shows the depth of dark color but also shows surface flaws
Coordinating colors listed by the maker Abingdon Putty HC-99, Davenport Tan HC-76, Metropolitan AF-690, Vanilla Milkshake OC-59 Ready-made light and mid-tone partners for walls and trim

One note on the LRV: the Benjamin Moore page for the PM-24 code shows an LRV of 4.4, while the HC-185 page shows 6.43. Both describe a very dark color; if light reflectance matters for a technical reason, such as a heat or contrast calculation, use the HC-185 figure or check the current spec sheet.

What Tudor Brown Actually Looks Like

On a large wall in good daylight, Tudor Brown looks like dark roasted coffee with a touch of brick in it. The red undertone is subtle. You notice it most next to cool grays, crisp whites or green foliage, where the brown looks warmer by contrast.

In low or evening light the color deepens and can look nearly black brown. Under warm LED bulbs (2700K to 3000K) it reads cozy and rich. Under cool daylight bulbs (5000K and above) it can look flatter and a little more muted, so match your bulbs to the mood you want.

Because the LRV is so low, Tudor Brown will make a room feel smaller and more enclosed. That is often the point. A dark color wraps a space, hides corners and makes artwork, brass hardware and wood tones stand out.

Best Rooms and Surfaces for Tudor Brown

Front doors, shutters and exterior trim

This is where the color shines. On a white, cream, tan or stone house, Tudor Brown gives a grounded, traditional look that reads more refined than black. It also works on window sashes and garage doors. Keep in mind that very dark exterior colors absorb heat, so check that the substrate is suitable. Some vinyl products restrict dark colors unless you use a paint formulated for them, so read the siding or door maker’s guidance first.

Dining rooms, libraries and dens

Rooms used mainly in the evening are ideal. Full-wall Tudor Brown with warm lighting creates a cocooning space that feels intentional rather than dark by accident.

Kitchen cabinets and islands

Painted on an island or lower cabinets with lighter uppers, it adds weight without the starkness of black. A satin or semi-gloss finish is easier to wipe clean.

Built-ins and accent walls

If a whole room feels like too much, paint just the bookcases, a fireplace wall or a ceiling. A dark ceiling over light walls can make a tall room feel more intimate.

Where to be careful

Small rooms with one north-facing window can feel gloomy in Tudor Brown unless you add plenty of warm artificial light. Large dark walls also show lap marks and touch-ups more readily than light colors do.

Colors That Pair Well With Tudor Brown

The manufacturer’s coordinating list is a useful starting point because it gives you a range of lighter partners:

  • Abingdon Putty HC-99, an understated buff with a hint of green, for walls in adjoining rooms or as an exterior body color.
  • Davenport Tan HC-76, a gray-muted brown (LRV 20.35), for a tonal two-tone exterior or trim.
  • Metropolitan AF-690, a gray with cool undertones, for a cooler contrast that lets the brown look warmer.
  • Vanilla Milkshake OC-59, a white softened by muted gray tones, for trim, ceilings and cabinets.

Beyond those, a few general pairing rules work well with any deep warm brown:

  • Creamy whites look more harmonious than stark, blue-leaning whites.
  • Muted greens, such as sage and olive, echo garden settings and suit the earthy feel.
  • Natural materials help: oak, walnut, brass, aged bronze, leather and terracotta all sit comfortably next to it.
  • For flooring, mid-tone and light wood or warm stone keeps a dark room from feeling heavy.

Look-Alikes and Close Alternatives

If Tudor Brown is not quite right, you are usually trying to move in one of three directions: lighter, cooler or redder. For lighter, step to a mid-tone warm brown in the same collection. For cooler, look at dark browns that lean gray, sometimes sold as espresso or charcoal brown. For more red, a deep oxblood or brick-brown will feel richer.

Many paint makers sell dark chocolate browns that look similar at a glance. Color-matching apps often suggest close equivalents, but undertones can differ in ways you only see on the wall. If you need a match to existing paint, have a store scan a chip from the surface rather than relying on a name.

Looking to buy Benjamin Moore Tudor Brown? Compare top-rated options.
Shop on Amazon →Browse Our Shop
As an Amazon Associate we earn from qualifying purchases.

How to Test and Paint Tudor Brown

  1. Sample big. Use peel and stick paint sample swatches or paint two coats on a poster board at least 2 feet square. Small chips make dark colors look lighter than they will on a full wall.
  2. View at different times. Check the sample morning, afternoon and evening, and on more than one wall.
  3. Prime with a tinted primer. A gray or deep-tinted primer helps a dark color cover in fewer coats, especially over white or patchy surfaces.
  4. Plan for two finish coats. Deep colors often need two full coats for even depth. Some need a third over bright surfaces.
  5. Keep a wet edge. Work one wall at a time, corner to corner, and avoid stopping mid-wall to limit lap marks.
  6. Box your paint. Mix all cans for a room together in a larger bucket so the color is consistent.

Troubleshooting Dark Brown Paint

Streaks or lap marks

These come from paint drying at the edge before you roll back into it. Work in smaller sections, maintain a wet edge and use a quality roller cover with the right nap for your wall texture.

Touch-ups that flash

Dark colors show touch-ups in a different sheen. Use the same can and applicator, feather the edges, or repaint the full wall section corner to corner.

Exterior fading

Deep colors in strong sun can fade over time. Use a high-quality exterior paint, follow the maker’s recoat guidance and keep leftover paint labeled for future touch-ups.

Cost Notes

Deep colors often require a specific tint base and sometimes an extra coat, which raises material cost a little compared with a light neutral. Sample products cost a few dollars each and are worth buying. If you hire a painter, expect quotes for dark colors to account for extra coats and more careful cut-in work, especially on trim and cabinets.

When to Call a Pro

Cabinets, high exterior work and full rooms in very dark colors reward experience. A pro painter can sand and prime cabinets properly, spray for a smooth finish and avoid the flashing that dark colors make obvious. For exterior work above the first story, hire a painter with proper ladders, staging and insurance.

Frequently Asked Questions

What is the LRV of Benjamin Moore Tudor Brown?

Benjamin Moore’s current US color page lists Tudor Brown HC-185 at an LRV of 6.43, which classifies it as a very dark color. The page for the PM-24 code lists 4.4.

What undertone does Tudor Brown have?

Tudor Brown has a warm, red-leaning undertone. Benjamin Moore places it in its red color family, so it reads as a rich chocolate brown rather than a gray or green brown.

Is Tudor Brown good for a front door?

Yes. It is a popular choice for front doors and shutters on white, cream, tan and stone houses, where it looks softer and more traditional than black. Use a satin or semi-gloss exterior finish for durability.

What colors go with Benjamin Moore Tudor Brown?

The manufacturer suggests Abingdon Putty HC-99, Davenport Tan HC-76, Metropolitan AF-690 and Vanilla Milkshake OC-59. Creamy whites, muted greens and natural wood also pair well.

Is Tudor Brown the same as PM-24?

Yes. Benjamin Moore lists PM-24 as also known as Tudor Brown HC-185, the code in the Historical Colors collection.