Most people planning a brick project are surprised to learn that “brick veneer” covers two very different products. One is a full-depth brick about 3 5/8 inches thick that stands on its own foundation ledge and is tied back to the house. The other is thin brick, a slice usually 1/2 to 1 inch thick that is adhered to the wall like tile. Getting the brick veneer dimensions right decides whether the project needs a foundation ledge, how far the finished wall projects from the framing and how trim, windows and doors line up.
The quick answer: standard modular veneer brick measures 3 5/8 inches deep, 2 1/4 inches tall and 7 5/8 inches long, laid with 3/8 inch mortar joints so three courses rise exactly 8 inches. Thin brick usually shares the same face size, 2 1/4 by 7 5/8 inches for modular, but is only about 1/2 to 1 inch thick. A full-bed veneer wall sits about 1 inch or more off the sheathing with an air space and metal wall ties, while thin brick bonds directly to a prepared backing.
- Brick Veneer Dimensions Chart: Common Full-Bed Sizes
- Thin Brick Dimensions
- Full-Bed Veneer: Air Gap, Wall Ties and Total Wall Thickness
- How to Choose Between Thin Brick and Full Veneer
- Measuring and Estimating Your Brick Order
- General Cost Ranges
- Troubleshooting Common Sizing Problems
- Safety and When to Hire a Pro
- Frequently Asked Questions
The sizes here are the common US specified dimensions. Individual manufacturers vary slightly, especially for queen and king sizes, so confirm the actual dimensions on the product data sheet before you order trim, lintels or window extensions.
Brick Veneer Dimensions Chart: Common Full-Bed Sizes
These brick veneer dimensions are listed as depth by height by length in inches. Bricks per square foot assume a 3/8 inch mortar joint.
| Brick size | Actual size (D x H x L) | Coursing | Bricks per sq ft |
|---|---|---|---|
| Modular | 3 5/8 x 2 1/4 x 7 5/8 | 3 courses = 8 in | About 6.75 |
| Engineer modular | 3 5/8 x 2 13/16 x 7 5/8 | 5 courses = 16 in | About 5.6 |
| Closure modular | 3 5/8 x 3 5/8 x 7 5/8 | 1 course = 4 in | About 4.5 |
| Roman | 3 5/8 x 1 5/8 x 11 5/8 | 2 courses = 4 in | About 6.0 |
| Norman | 3 5/8 x 2 1/4 x 11 5/8 | 3 courses = 8 in | About 4.5 |
| Utility | 3 5/8 x 3 5/8 x 11 5/8 | 1 course = 4 in | About 3.0 |
| Queen (varies) | 2 3/4 to 3 x 2 3/4 x 7 5/8 to 8 5/8 | Varies by maker | About 5.1 to 5.8 |
| King (varies) | 2 3/4 to 3 x 2 5/8 x 9 5/8 | Varies by maker | About 4.8 |
Modular sizes are designed so that the brick plus one mortar joint equals a nominal dimension on a 4 inch grid. A modular brick is nominally 4 by 2 2/3 by 8 inches. Queen and king sizes are non-modular and are popular in parts of the South and Southwest because their thinner depth and larger face lay up faster and cost less per square foot of wall.
Thin Brick Dimensions
Thin brick is real fired clay brick made thin on purpose (or sliced from full units), and it is installed with an adhered method rather than a self-supporting wall. Because it carries no load and needs no foundation ledge, it is used on interior accent walls, fireplaces, backsplashes, basements and over existing exterior walls.
| Thin brick type | Face size (H x L) | Typical thickness | Common use |
|---|---|---|---|
| Modular face | 2 1/4 x 7 5/8 in | 1/2 to 1 in | Most interior and exterior jobs |
| Norman face | 2 1/4 x 11 5/8 in | 1/2 to 1 in | Long, linear modern look |
| Utility face | 3 5/8 x 11 5/8 in | 1/2 to 1 in | Larger-scale commercial look |
| Corner pieces | Same face with an L-shaped return | 1/2 to 1 in | Outside corners so the wall looks like full brick |
| Interior panels or sheets | Varies, often mesh-backed groups | About 1/2 in | Faster interior installs |
A finished thin brick wall usually adds about 1 to 1 1/2 inches to the wall surface, counting the brick, setting mortar and any lath or backer board. That makes it far easier to fit around existing windows, doors and electrical boxes than a full-bed veneer, which can add 5 inches or more.
Full-Bed Veneer: Air Gap, Wall Ties and Total Wall Thickness
An anchored brick veneer is a separate, non-structural wall built in front of the house frame. It needs three things that thin brick does not: a ledge to sit on, an air space behind it and metal ties holding it to the structure.
| Component | Common dimension | Why it matters |
|---|---|---|
| Air space behind brick | 1 in minimum, 1 1/2 to 2 in often preferred | Lets water drain down to flashing and weeps |
| Corrugated wall tie | Galvanized, about 7/8 in wide, 22 gauge | Connects veneer to studs |
| Tie spacing | Up to about 24 in vertical and 32 in horizontal | Each tie covers no more than about 2.67 sq ft of wall |
| Weep holes | About 3/16 in minimum, 33 in apart maximum | Drain water at the base and over openings |
| Mortar joint | 3/8 in typical | Sets coursing and brick count |
| Total added depth | About 4 5/8 to 6 in | Brick depth plus air space |
Those tie spacing and weep figures reflect common residential code prescriptions for anchored veneer over wood framing. High-wind and seismic areas typically require closer tie spacing, so confirm your local requirements with the building department. Ties must be fastened into the studs, not just the sheathing, and installed as the courses go up, not added afterward.
Full-bed brick veneer is heavy, roughly 35 to 40 pounds per square foot of wall for standard 3 5/8 inch brick. That is why it needs a foundation ledge (often called a brick ledge) wide enough to carry the brick plus the air space, and steel angle lintels over windows and doors. Adhered thin brick systems are much lighter, and codes generally cap adhered veneer weight at around 15 pounds per square foot.
How to Choose Between Thin Brick and Full Veneer
- New construction with a brick ledge planned: Full-bed veneer gives the classic look and lasts for generations with minimal maintenance.
- Existing house without a ledge: Thin brick avoids foundation work and big trim changes.
- Interior walls and fireplaces: Thin brick is almost always the practical choice because of weight and depth.
- Tight clearances at windows and doors: Thin brick adds about an inch instead of 5 or more.
- Budget focus: Thin brick usually costs more per brick but can save on foundation, structural and trim work.
Measuring and Estimating Your Brick Order
- Measure the height and width of each wall section in feet and multiply to get square footage.
- Subtract windows, doors and other openings.
- Multiply the net area by the bricks per square foot for your size, such as about 6.75 for modular.
- For thin brick, count outside corners in linear feet and order corner pieces separately.
- Add 5 to 10 percent for cuts, breakage and future repairs, more for complex walls.
- Check the coursing heights against window sills and head heights so you do not end up with a sliver course.
Example: a 20 by 8 foot wall with one 3 by 5 foot window has 145 square feet of net area. In modular brick, that is about 980 bricks before waste, or roughly 1,030 to 1,080 with a typical allowance.
General Cost Ranges
As a general range, thin brick material often runs from the high single digits to the mid teens per square foot, with installed costs commonly from the mid teens to $30 or more per square foot depending on access and complexity. Full-bed brick veneer installed on new construction often falls in a similar to somewhat higher range, and retrofitting it onto an existing house can climb well beyond that once foundation ledges, lintels and window extensions are added. Regional labor rates have the biggest effect.
Troubleshooting Common Sizing Problems
- Courses do not line up with windows: Plan the coursing before ordering windows, or use a brick height that works with your opening heights.
- Brick sticks out past the foundation: The ledge was too narrow. Codes limit how far veneer can overhang its support, so a fix may need engineering.
- Water stains or efflorescence: Often a sign of mortar droppings clogging the air space or blocked weeps. Use a mortar net at the base and keep weeps open.
- Thin brick popping off: Usually poor surface prep, wrong mortar or no moisture management. Follow the system’s backing and water barrier requirements exactly.
- Mismatched new and old brick: Sizes vary by plant and era. Measure the brick veneer dimensions of an existing brick in all three directions and bring a sample when shopping.
Safety and When to Hire a Pro
Full-bed brick veneer is a structural-adjacent job: it needs a foundation sized to carry it, proper ties anchored into the framing and flashing that sends water back out. Most areas require a permit, and anyone digging for a new footing or ledge should call 811 before digging to locate buried utilities. Check HOA rules before changing a house exterior. Taller walls, two-story veneer, retrofits on existing homes and work near windows and doors that require lintels should be handled by a licensed mason or contractor, with an engineer involved if loads or foundations change. Thin brick on interior walls is a reasonable DIY project for a careful tiler, but cutting brick produces silica dust, so use a wet saw, wear an N95 or better respirator and clean up with a HEPA vacuum.
Frequently Asked Questions
What is the standard size of brick veneer?
The most common US veneer brick is the modular size: 3 5/8 inches deep, 2 1/4 inches tall and 7 5/8 inches long. With 3/8 inch mortar joints, three courses equal 8 inches of height.
How thick is thin brick veneer?
Thin brick is usually about 1/2 to 1 inch thick, with face sizes that match standard bricks. Installed, it typically adds about 1 to 1 1/2 inches to the wall.
How big is the air gap behind brick veneer?
A minimum of about 1 inch is standard, and many builders prefer 1 1/2 to 2 inches so mortar droppings do not bridge the gap and trap water.
How far apart are brick ties spaced?
Common residential prescriptions allow up to about 24 inches vertically and 32 inches horizontally, with each tie supporting no more than about 2.67 square feet. Wind and seismic zones often require closer spacing.
How many bricks are in a square foot of veneer?
About 6.75 modular bricks, 4.5 Norman bricks or 3 utility bricks per square foot with 3/8 inch joints. Add 5 to 10 percent for waste.