Buy the wrong-size door and you either have a bathroom you cannot get a wheelchair through or a closet slab that will not clear the frame. An accurate interior door size chart takes the guesswork out of ordering, whether you are replacing a single slab or roughing in openings for a whole remodel. This interior door size chart guide lays out standard widths and heights, explains the difference between slab and prehung sizing, and shows you exactly how to measure so your new door fits the first time.
Part of our Windows & Doors guide — explore the full guide →
- Standard Interior Door Widths
- Reading Door Sizes in Feet and Inches
- Standard Interior Door Heights
- Slab vs Prehung: Sizing Differs
- Rough Opening Dimensions
- How to Measure an Existing Door
- Bifold, Pocket, and Double Door Sizing
- Jamb Width and Wall Thickness
- Solid Core vs Hollow Core Weight
- Special Sizes and Ordering Tips
Standard Interior Door Widths
Interior door widths in the U.S. follow a predictable set of dimensions, and each width has a typical use. Widths are stated as feet and inches, so a “2/6” door is 2 feet 6 inches, or 30 inches wide.
- 24 inches (2/0): small closets, pantries, and half-bath doors in tight spaces.
- 28 inches (2/4): closets and secondary spaces.
- 30 inches (2/6): common for bathrooms, closets, and smaller bedrooms.
- 32 inches (2/8): the most common bedroom door and the practical minimum for accessibility.
- 36 inches (3/0): main bedrooms, accessible bathrooms, and wide passages; required width for wheelchair access.
If accessibility matters, 36 inches is the target because it provides the roughly 32 inches of clear passage that a wheelchair needs after accounting for the open door and stops.
Reading Door Sizes in Feet and Inches
Building suppliers and contractors talk about doors in a shorthand that confuses many homeowners at first. Widths and heights are stated in feet and inches with a slash, so a “2/8” door is 2 feet 8 inches, or 32 inches wide, and a “6/8” door is 6 feet 8 inches, or 80 inches tall.
Put together, a common bedroom door is described as “2/8 x 6/8,” meaning 32 inches wide by 80 inches tall. Once you learn to read it, the notation is quick: the first number before the slash is feet, the second is inches. A 3/0 door is a clean 3 feet, or 36 inches. This shorthand appears on quotes, spec sheets, and store shelf tags, so translating it accurately keeps you from ordering a door a full size off. When in doubt, convert the shorthand to plain inches and double-check against your measurements before you buy.
Standard Interior Door Heights
Height is more consistent than width. The overwhelming majority of interior doors are one standard height, with a taller option for modern and higher-end homes.
- 80 inches (6/8): the standard height for virtually all interior doors in homes built over the last several decades.
- 84 inches (7/0): found in some newer or custom homes for a more dramatic proportion.
- 96 inches (8/0): used in high-end construction with tall ceilings.
Thickness matters too. Standard interior door slabs are 1 3/8 inches thick. Exterior and some solid-core doors run 1 3/4 inches, so do not assume every slab in the store shares the same thickness as your existing door.
Slab vs Prehung: Sizing Differs
How you buy the door changes which measurement you need. This trips up more first-timers than any other detail.
A slab is just the door panel with no frame or hinges. You buy a slab when your existing jamb and hinges are in good shape and you only want a new door. You match the slab to your old door’s width, height, and thickness, and you transfer the hinge and knob locations.
A prehung door comes already mounted in its frame with hinges installed. You buy a prehung when you are replacing the whole assembly or building new. Prehung sizing references the door size, but you also need to know the jamb width, typically 4 9/16 inches for 2×4 walls with 1/2-inch drywall, and the rough opening.
Rough Opening Dimensions
When framing for a new prehung door, the rough opening in the studs must be larger than the door to leave room for the frame and shims. The standard formula is simple.
- Rough opening width equals door width plus 2 inches.
- Rough opening height equals door height plus roughly 2 1/2 inches from the finished floor.
So a 32-inch door needs a rough opening about 34 inches wide, and a standard 80-inch door needs a rough opening around 82 1/2 inches tall. That extra space lets you plumb and shim the frame square even when the framing is slightly off. Always confirm the prehung unit’s recommended rough opening on its spec sheet, since jamb designs vary.
How to Measure an Existing Door
Replacing a slab means copying the old door precisely. Take the old door off its hinges and measure it directly rather than measuring the opening.
- Measure the width across the top edge, in inches.
- Measure the height along one long edge.
- Measure the thickness of the edge.
- Note the hinge count, hinge size, and the backset of the knob, usually 2 3/8 inches.
- Check the swing direction, left-hand or right-hand, and whether hinges are on the left or right as you face the door from the outside of the room.
Handing matters for prehung doors especially. Stand on the side where the door swings away from you; if the knob is on your right, it is a right-hand door. Get this wrong on a prehung and the door opens into the wrong space.
Bifold, Pocket, and Double Door Sizing
Not every opening takes a single swinging slab, and these specialty doors follow their own conventions. Bifold closet doors are sized by the total opening they cover, and each unit is actually two or four hinged panels. Common bifold sets fit openings of 24, 30, 32, 36, 48, and 60 inches wide, with the panels splitting that width. Measure the finished opening, not the panels.
Pocket doors, which slide into a cavity in the wall, use standard door widths like 28, 30, and 32 inches, but they require a rough opening roughly double the door width to house the slide pocket, plus a special frame kit installed during framing. Double doors and French doors are described by the combined width of both leaves; a “5/0” double door is two 30-inch doors totaling 60 inches. When ordering any of these, confirm whether the size listed refers to each panel or the full opening, because that ambiguity causes more ordering errors than any other single issue.
Jamb Width and Wall Thickness
For prehung doors, the jamb has to match your wall thickness, and getting this wrong leaves the frame either recessed or proud of the drywall. The jamb width is the depth of the door frame from one wall surface to the other.
- 4 9/16 inches: the standard for a 2×4 stud wall with 1/2-inch drywall on both sides, the most common residential wall.
- 5 1/4 inches: for 2×4 walls with thicker wall finishes or 5/8-inch drywall.
- 6 9/16 inches: for 2×6 exterior or plumbing walls.
Measure the actual thickness of your finished wall at the opening before ordering a prehung unit. If your wall thickness falls between standard jamb sizes, most manufacturers offer jamb extension kits, thin strips that build out the frame to meet the drywall flush. It is far easier to order the right jamb than to shim and fuss with a mismatched one later.
Solid Core vs Hollow Core Weight
Size is not the only spec that affects your install; the door’s construction changes its weight and how it hangs. Hollow-core doors have a cardboard honeycomb interior and weigh only 25 to 30 pounds, making them easy to hang on standard hinges and cheap at $30 to $80. They are the builder-grade default but transmit sound readily and feel flimsy.
Solid-core doors, with an engineered wood-composite fill, weigh 60 to 100 pounds, block far more sound, and feel substantial like an exterior door, running $70 to $200. Their weight matters for sizing and hardware: a heavy solid-core slab may need a third or heavier-duty hinge to hang true over time. If you are upgrading bedroom or bathroom doors for privacy and quiet, factor the added weight into your hinge choice, and be aware that a solid-core door of the same nominal size is a two-person job to hang.
Special Sizes and Ordering Tips
Older homes, especially pre-1950 construction, often have non-standard door sizes that no chart covers exactly. Bifold closet doors, pocket doors, and French doors each have their own sizing conventions. For anything unusual, measure carefully and order a custom slab rather than forcing a stock size.
Keep this interior door size chart handy whenever you shop, write down every measurement before you leave for the store, and double-check thickness and handing. A door is one of the easier home upgrades to install yourself, but only if the size is right. Measure twice, order once, and you will hang a door that swings clean and latches on the first try.