Home Improvement

Standard Interior Door Size: The Complete Dimensions Chart

Standard Interior Door Size: Dimensions Chart

Order a “standard door” and you could receive any of six widths — because interior doors do not have one standard size, they have a standard system. The most common standard interior door size in US homes is 30 or 32 inches wide by 80 inches tall and 1-3/8 inches thick, but bathrooms, closets, and bedrooms each pull from different points on the size ladder. This reference lays out every stock dimension, the rough openings each one needs, and how to measure an existing door so the replacement actually fits.

Standard Interior Door Widths

Stock widths run in 2-inch increments, and the trade names them in feet/inches shorthand (a 2/6 is 2 feet 6 inches, or 30 inches):

  • 18 in. (1/6): Narrow closets, small pantries. Minimal stock; often special order.
  • 24 in. (2/0): Small closets, powder rooms in tight plans, linen closets.
  • 28 in. (2/4): Bathrooms and small bedrooms, very common in pre-1980 homes.
  • 30 in. (2/6): The most common single width — bedrooms, bathrooms, offices.
  • 32 in. (2/8): Bedrooms and any room where accessibility matters; the most common width in newer construction.
  • 36 in. (3/0): Primary suites, utility and garage-entry doors, and any doorway designed for wheelchair passage (about 34 inches of clear opening).

Building code (IRC) sets no minimum width for most interior passage doors — the requirements you may have heard (like 32-inch clear) apply to accessible design standards, not ordinary bedrooms. That said, 30 inches is the practical floor for rooms furniture must enter, and remodelers upgrading 28-inch bathroom doors to 30 or 32 rarely regret it.

Height, Thickness, and the Full Chart

Height is far more standardized: 80 inches (6/8) is universal in homes built since the mid-20th century. You will encounter 78-inch (6/6) doors in older homes and some closets, and 84-inch (7/0) and 96-inch (8/0) doors in newer high-ceiling construction. Thickness is 1-3/8 inches for nearly all interior doors, stepping to 1-3/4 inches for doors over 36 inches wide or 90 inches tall, and for sound-rated solid-core upgrades.

  • 24 x 80 — rough opening 26 x 82-1/2
  • 28 x 80 — rough opening 30 x 82-1/2
  • 30 x 80 — rough opening 32 x 82-1/2
  • 32 x 80 — rough opening 34 x 82-1/2
  • 36 x 80 — rough opening 38 x 82-1/2

The pattern: rough opening = slab width plus 2 inches, height plus 2 to 2-1/2 inches, which leaves room for the 3/4-inch jambs and shim space. Prehung unit outside-of-frame dimensions run about 1-1/2 inches over slab width.

Sizes for Special Door Types

  • Bifold closet doors: Sold as pairs and fours in 24, 30, 32, and 36-inch total widths (two panels) and 48, 60, 72-inch (four panels), 80 inches tall. Bifolds size to the finished opening, not a rough opening.
  • Bypass (sliding) closet doors: 48, 60, 72, and 96-inch openings covered by two overlapping panels.
  • Pocket doors: Use standard slab sizes (30, 32, 36 x 80) but need a rough opening roughly double the slab width for the pocket frame.
  • Barn doors: Sized to overhang the opening by at least 1 inch per side and 1 inch top; a 36-inch opening wants a 38 to 42-inch barn slab, commonly 84 inches tall.
  • Double (French) interior doors: Pairs of 24, 30, or 32-inch slabs filling 48 to 64-inch openings.

Style options across all these sizes — panel counts, flush, glass — are their own topic; our interior door styles guide walks the full lineup.

How to Measure an Existing Door

Replacing a slab: measure the door itself — width across the middle, height at the center, thickness — and round to the nearest standard size (a slab measuring 29-3/4 x 79-1/2 is a 30 x 80; doors are routinely trimmed slightly at install). Note the hinge count and positions, the lockset bore height (usually 36 to 38 inches to center), and the backset (2-3/8 inches standard). Replacing prehung: pull the casing on one side and measure stud to stud and subfloor to header. Then check the hand — stand on the side where the door swings toward you; hinges on the right is a right-hand door.

The Standards Around the Door: Hinges, Hardware, and Jambs

Door sizing drags a set of companion standards with it, worth knowing before any order:

  • Hinges: Interior doors use 3-1/2 x 3-1/2 inch hinges with 5/8-inch radius corners (square-corner hinges signal an older or custom door). Doors to 32 inches take two or three hinges; 36-inch and solid-core doors want three. Standard placement is 7 inches from the top and 11 from the bottom, third hinge centered.
  • Lockset bore: 2-1/8 inch face bore, 1-inch edge bore, 2-3/8 inch backset, centered 36 to 38 inches above the floor. Every big-box knob and lever assumes these numbers.
  • Jambs: 4-9/16 inches deep for 2×4 walls with 1/2-inch drywall both sides; 6-9/16 for 2×6 walls. Flat jamb stock is 11/16 to 3/4 inch thick.
  • Undercut: Interior doors are hung with roughly 1/2 to 3/4 inch of clearance above finished flooring for airflow and carpet — more (up to 1 inch) where HVAC returns rely on door undercuts.

That undercut number is why flooring projects so often trigger door trimming: add 3/8-inch laminate plus pad over a slab that cleared old carpet and suddenly three doors scrape. Hollow-core doors can lose about an inch from the bottom rail before the cut exposes the hollow cavity; mark the cut, score the veneer with a knife to prevent chip-out, and run a circular saw against a clamped straightedge.

Looking to buy Standard Interior Door Size? Compare top-rated options.
Shop on Amazon →Browse Our Shop
As an Amazon Associate we earn from qualifying purchases.

What Nonstandard Sizes Mean for Your Wallet

Stock hollow-core slabs in standard sizes run $40 to $90, prehung units $120 to $250, and solid-core versions $80 to $250 more. Go off the chart — a 27-inch width from a 1940s house, an 82-inch height — and you face three options: special-order (add 30 to 100 percent and 2 to 6 weeks), trim a larger stock door (hollow-core doors can only lose about 1 inch per edge before you hit the cardboard core; solid-core takes more), or reframe the opening to a standard size during a bigger remodel. For whole-house door replacements in odd-sized older homes, reframing to standard once often beats special-ordering forever.

Choosing Sizes for New Construction or Remodels

Spec 32-inch doors for bedrooms and bathrooms wherever the plan allows — the extra 2 inches over the old 30-inch default costs nearly nothing at build time and future-proofs the house for accessibility. Use 36 inches at the primary suite and any main-floor bath that could serve aging-in-place. Keep closets at 24 to 30 inches or go bifold/bypass to gain full access to the opening. And match heights floor-wide: mixing 80-inch and 84-inch doors on the same hallway reads as a mistake even to eyes that cannot name why.

Quick Answers to the Common Size Questions

What size is a normal bedroom door? 30 or 32 inches wide by 80 tall in most US homes. What is the smallest door code allows to a bathroom? The IRC sets no minimum for interior passage doors; 24 inches is the practical floor and 28-plus is standard practice. Are closet doors shorter? Sometimes — 78-inch and even 72-inch heights appear in older closets, which is why bifolds still sell in multiple heights. Can two different widths share one hallway? Functionally yes, and most homes mix them; just keep heights and styles consistent, since the eye reads header alignment far more than width. Do door sizes include the frame? No — sizes always name the slab alone, which is why the rough opening runs 2 inches larger and a prehung unit’s overall frame runs about 1-1/2 inches over slab width.

Standard sizes exist so that doors, frames, hinges, and locksets all interchange without custom work. Measure what you have, buy on the chart whenever possible, and reserve custom sizing for the openings that genuinely cannot conform — that is the whole game with interior doors.

Standard Room Door Size by Room, Plus Other Regular Door Sizes

The standard room door size in most US homes is 32 inches wide by 80 inches tall in newer construction and 30 by 80 in older ones, with interior slabs 1-3/8 inches thick. Search for a “regular door size” and the answer depends on which door you mean, because entry doors, patio doors, and closet doors each follow their own stock sizes.

Typical Sizes Room by Room

Door Location Common Width Height Thickness
Bedroom 30 or 32 inches 80 inches 1-3/8 inches
Bathroom 28 to 32 inches 80 inches 1-3/8 inches
Primary suite 32 to 36 inches 80 inches 1-3/8 inches
Reach-in closet (single) 24 to 30 inches 78 to 80 inches 1-3/8 inches
Laundry or utility room 30 to 36 inches 80 inches 1-3/8 inches
Front entry (exterior) 36 inches 80 inches 1-3/4 inches
Sliding patio door 60, 72, or 96 inches 80 inches Frame unit

Interior vs Exterior: Why “Regular” Varies

An exterior door is not just a bigger interior door. Entry doors are 1-3/4 inches thick, solid or insulated, and hung in a frame with a sill and weatherstripping, so the common 36 by 80 front door cannot swap into an interior opening sized for a 1-3/8 inch slab without new jambs. Back and side entry doors often drop to 32 inches wide, but they keep the heavier thickness and the threshold. A door between the house and an attached garage is usually treated as exterior-grade too, and many local codes call for a solid-core or fire-rated door there, so check your local rule before ordering.

Quick Ways to Tell Which Size You Have

  • Measure the slab, not the opening: width across the middle, height at the center.
  • Check thickness at the latch edge. A reading near 1-3/8 inches means an interior slab; 1-3/4 inches points to an exterior or upgraded solid-core door.
  • Read the top or hinge edge. Many stock doors carry a stamped or stickered size code such as 2/8 x 6/8, which translates to 32 by 80 inches.
  • Note the height. Anything near 78 inches marks an older home or closet door, and 84 to 96 inches signals a newer high-ceiling build.

For a whole-room refresh, matching every door on a hallway to one width and the same 80-inch height keeps trim and headers lined up.

Frequently Asked Questions

What does a 3080 door measure?

A 3080 door measures 3 feet 0 inches wide by 8 feet 0 inches tall, or 36 by 96 inches. The four digits are trade shorthand for feet and inches of width followed by height, so a 2868 is 32 by 80 inches and a 3068 is 36 by 80 inches. The code names the slab size, so the rough opening still needs about 2 extra inches in each direction.

What is the standard interior door size in mm?

A standard 30 by 80 inch interior door is about 762 by 2032 mm, and a 32 by 80 inch door is about 813 by 2032 mm. A 36-inch door is about 914 mm wide, a 28-inch door about 711 mm, and the usual 1-3/8 inch slab is about 35 mm thick. US stock doors are made in inch sizes, so metric figures are conversions rather than separate products.

What is the actual clear opening of a 32-inch door?

A 32-inch door gives roughly 29-1/2 to 30 inches of clear opening when it swings open to 90 degrees. The door thickness and the stop molding on the latch side eat up about 2 inches of the slab width. That is why accessibility guidance calls for 36-inch doors when a full 32 inches of clear passage is needed, since those typically clear about 34 inches.

What door size fits a 48-inch opening?

A 48-inch finished opening usually takes a pair of 24-inch doors, either as double swinging doors, a 48-inch bifold set, or a 48-inch bypass sliding pair. A single 48-inch slab is not a stock interior size and would need special ordering plus heavier hinges. For a closet, bifolds give the most access, while double French doors suit a room entry.

How much does an interior door weigh?

A standard hollow-core interior door weighs about 15 to 30 pounds, while a solid-core door of the same 30 or 32 by 80 inch size weighs roughly 50 to 90 pounds. Solid wood doors can be heavier still. Weight matters for hinge choice, since heavy solid-core slabs should hang on three hinges with at least one long screw reaching the framing.