Home Improvement

Medium Size Fridge Dimensions: Mid-Size Capacity and Fit Chart

Medium Size Fridge Dimensions: Mid-Size Capacity and Fit Chart

A medium size fridge usually means a full-height refrigerator with roughly 10 to 18 cubic feet of total storage, about 24 to 30 inches wide, 58 to 67 inches tall and 25 to 31 inches deep including the doors. That puts it between the compact and apartment models people tuck under counters or into studio kitchens and the 30 to 36 inch standard units most family kitchens are built around.

The most common mid size fridge freezer is a top-freezer design, because it gives the most storage for the width. Bottom-freezer and narrow two-door models also come in this range, and they trade a little capacity for easier access to fresh food. Width is the measurement that decides most purchases, so start there.

Exact sizes vary by model. Use the ranges that follow to narrow your search, then check the spec sheet of the specific unit and the installation guide for required clearances before you buy.

Medium Size Fridge Dimensions Chart

These are typical ranges for each mid-size class. Depth is listed including the door but not handles, which can add 1 to 3 inches.

Mid-size class Capacity Width Height Depth (with door)
Narrow top-freezer 10 to 12 cu ft 23.5 to 24.5 in 58 to 64 in 25 to 28 in
Mid-width top-freezer 13 to 16 cu ft 27.5 to 28.5 in 61 to 66 in 27 to 30 in
Full-width top-freezer (upper mid) 16 to 18 cu ft 29.5 to 30 in 64 to 67 in 28 to 31 in
Narrow bottom-freezer 10 to 12 cu ft 23.5 to 24.5 in 66 to 70 in 25 to 28 in
Bottom-freezer, 28 to 30 in 14 to 18 cu ft 27.5 to 30 in 66 to 70 in 28 to 32 in
Counter-depth mid-size 11 to 15 cu ft 24 to 30 in 67 to 72 in 24 to 27 in

For comparison, compact and apartment refrigerators usually run 3 to 10 cu ft and 18 to 24 inches wide, while standard full-size models typically start around 18 to 20 cu ft and run 30 to 36 inches wide. If your opening is exactly 24 inches, a narrow mid-size model is likely the largest thing that fits.

Space You Need Around the Fridge

The cabinet opening needs to be larger than the fridge itself. Refrigerators shed heat through coils and vents, and the doors need room to swing open far enough to pull out crisper drawers.

  • Top: about 1 inch of clearance, sometimes more for top-venting models.
  • Sides: about 1/8 to 1/2 inch each side, plus extra on the hinge side if the fridge sits next to a wall.
  • Back: about 1 to 2 inches for airflow, the power cord and any water line.
  • Door swing: often 2 to 4 inches on the hinge side next to a wall so the door opens past 90 degrees and drawers slide out.
  • Front: about 30 to 36 inches of clear floor space so you can open the doors and stand in front of them.

Some newer models are designed for zero-clearance side installs; the installation manual is the final word. As a working rule, add about 1 inch to the fridge width, 1 inch to the height and 2 inches to the depth to get the minimum opening.

How to Measure for a Mid-Size Refrigerator

A laser distance measure makes this faster and more accurate than a tape, especially for height and deep alcoves, but a 25 foot tape works fine. Write each number down in inches to the nearest 1/8.

  1. Measure the opening width at the top, middle and bottom. Use the smallest number, because cabinets and walls are rarely perfectly square.
  2. Measure the height from the finished floor to the underside of the upper cabinet or soffit at the front and back of the opening.
  3. Measure the depth from the back wall to the front edge of the counter. Note any baseboard, outlet or water valve that sticks out from the wall.
  4. Check door swing. Note whether a wall, island or cabinet end sits next to the hinge side, and confirm the door can open at least 90 degrees.
  5. Measure the delivery path. Check every doorway, hallway and stair turn between the entry and the kitchen. Most mid-size models need at least a 26 to 32 inch path, depending on width and depth with doors removed.
  6. Compare to the spec sheet. Use the model’s listed dimensions plus the manufacturer’s clearances, not just the advertised capacity.

Top-Freezer vs Bottom-Freezer in the Mid-Size Range

Freezer placement changes both how a medium refrigerator with freezer fits and how it works for you day to day.

Top-freezer models

Top-freezer units give the most total capacity per inch of width and usually cost the least. The freezer typically takes about 25 to 30 percent of the total space. The downside is that you bend down to reach the bottom of the fresh-food section, which holds the items you use most. For most budgets, this is the best value mid-size layout.

Bottom-freezer models

Bottom-freezer models put fresh food at eye level and the freezer in a drawer or door underneath. They are usually a few inches taller than a top-freezer of the same width and often cost more. The freezer share is similar, but a drawer makes frozen items easier to see.

Single-door with interior freezer compartment

Some full-height models in the 10 to 12 cu ft range use one door with a small freezer compartment inside. These hold ice and a few frozen items only. They suit people who rarely freeze food, but they are not a true medium size fridge freezer for a household.

Freezer share trade-offs

If you buy in bulk, cook ahead or keep frozen vegetables on hand, look at freezer capacity, not just total capacity. A 14 cu ft model might have 3 to 4 cu ft of freezer, which is enough for one or two people but tight for a family. In that case, a mid-size fridge paired with a small chest freezer in a garage or basement often works better than squeezing in a bigger refrigerator.

Looking to buy Medium Size Fridge Dimensions? Compare top-rated options.
Shop on Amazon →Browse Our Shop
As an Amazon Associate we earn from qualifying purchases.

Who a Medium Size Fridge Suits

Mid-size refrigerators fill a real gap. They make sense in these situations:

  • One or two people: A common rule of thumb is about 4 to 6 cu ft of fridge capacity per adult, so 10 to 14 cu ft covers most couples.
  • Older or galley kitchens: Many homes built before the 1980s have 28 to 30 inch openings, sometimes with a low cabinet above.
  • Condos, apartments and ADUs: A 24 inch mid-size unit gives full-height storage where a standard fridge will not fit.
  • Second fridges: Basements, garages and in-law suites often need more than a mini-fridge but less than a full kitchen unit. Check that the model is rated for the garage temperature range if it will sit in an unheated space.
  • Rental units: Smaller models cost less to buy and run, and they fit standard turnover openings.

Families of four or more usually outgrow anything under about 18 cu ft quickly, especially if they shop weekly.

Cost and Energy Use

General price ranges for mid-size refrigerators run roughly $500 to $1,000 for a basic top-freezer and $900 to $1,800 for bottom-freezer or counter-depth models. Prices climb with stainless finishes, ice makers and smart features. Energy use for a mid-size top-freezer is generally among the lowest of full-height styles; look for a high-efficiency rated model and check the yellow energy label for the estimated yearly cost.

Installation is usually simple. Delivery crews often include hookup of a water line if the model has an ice maker. Plug the fridge directly into a properly grounded wall outlet rather than an extension cord or power strip.

Troubleshooting Fit Problems

Too tall by an inch: Most refrigerators have adjustable leveling legs that can drop the height slightly, but not enough to beat a full inch. Look for a model with a shorter cabinet height or remove an upper cabinet door or face frame.

Door hits the wall: Reverse the door if the model allows it, or pull the fridge forward slightly. Many mid-size top-freezer models have reversible doors.

Fridge sticks out past the counter: This is normal for standard-depth models. Counter-depth versions sit nearly flush but hold less.

Will not fit through the doorway: Removing the doors and handles usually gains 2 to 4 inches of depth. Check the manual for the procedure.

Running warm or noisy: Check rear and top clearance first. A fridge jammed against the wall cannot shed heat efficiently.

When to Call a Pro

Most homeowners can measure and choose a mid-size fridge without help. Call a licensed plumber if you need a new water line run for an ice maker or dispenser, and a licensed electrician if there is no dedicated, properly grounded outlet behind the fridge location. A cabinet installer can cut down an upper cabinet or adjust an opening if you are trying to fit a slightly larger unit.

Frequently Asked Questions

What size is a medium size fridge?

Most medium refrigerators hold about 10 to 18 cu ft and measure roughly 24 to 30 inches wide, 58 to 70 inches tall and 25 to 31 inches deep, depending on freezer placement.

How many cubic feet is a mid size fridge freezer?

Total capacity is typically 10 to 18 cu ft, with the freezer usually taking about a quarter to a third of that, or roughly 3 to 5 cu ft.

Will a mid-size fridge fit in a 30 inch opening?

Yes. A 28 inch wide model fits comfortably, and many 29.5 to 30 inch models fit if the opening allows the required side clearance. Check the spec sheet for the minimum cutout.

Is a 14 cubic foot refrigerator big enough for two people?

For most couples, yes. It covers weekly groceries and leftovers. If you freeze a lot of food, consider a model with a larger freezer or add a small chest freezer.

How much clearance does a medium refrigerator with freezer need?

Plan on about 1 inch above, 1/8 to 1/2 inch on each side and 1 to 2 inches behind, plus room on the hinge side for the door to swing open fully.