The rounded retro look is the reason most people buy one, and it is also the reason Smeg fridge dimensions catch so many buyers off guard. Those curved doors and chrome handles stick out farther than a flat-front fridge, and the doors need a lot of room to swing open. The 50s Style (FAB) line sold in the United States ranges from a 16-inch-wide mini fridge to a 31-inch-wide top-freezer model, so the right size depends on the job: a bar cooler, a second fridge or the main refrigerator for a family kitchen.
The short version: the FAB5 is about 16 inches wide and 29 inches tall, the FAB10 is about 21.5 inches wide and 38 inches tall, the FAB28 and FAB32 are both about 23.7 inches wide (the FAB32 is much taller), the FAB38 is about 27.8 inches wide and 80.7 inches tall, and the FAB50 is about 31.3 inches wide. Depth with the handle runs from roughly 23 to 33.5 inches across the range.
Every figure here comes from US product listings and spec sheets for current model codes. Specs can change between production runs, so confirm the exact model number on the spec sheet before you cut cabinets or book delivery.
Smeg Fridge Dimensions Chart
The chart covers the main US models in the retro FAB family. Model codes include extra letters for hinge side and color (for example, a “UR” or “UL” for right or left hinge, followed by a color code), but the dimensions stay the same across colors within each model.
| Model | Type | Width | Height | Depth with handle | Depth, door open 90 degrees |
|---|---|---|---|---|---|
| FAB5 | Mini fridge (bar cooler) | 15 7/8 in | 29 1/8 in | About 23 in | About 31 1/2 in |
| FAB10 | Compact fridge with small freezer compartment | 21 7/16 in | 38 3/16 in | 27 5/8 in | 42 11/16 in |
| FAB28 | 24-inch single-door with freezer compartment | 23 11/16 in | 60 1/4 in | 30 1/4 in | 47 1/8 in |
| FAB32 | 24-inch two-door, bottom freezer | About 23 2/3 in | About 77 1/2 in | 30 1/4 in | 47 1/8 in |
| FAB38 | 28-inch two-door, bottom freezer | 27 13/16 in | 80 11/16 in | 31 15/16 in | 52 3/4 in |
| FAB50 | 32-inch two-door, top freezer | 31 5/16 in | 75 5/8 in | 33 1/2 in | 57 7/8 in |
Smeg fridge sizes are easiest to compare by width first, since that is what decides whether a model fits an opening. Depth without the handle is a little smaller: about 21 5/8 inches for the FAB5, 26 1/4 inches for the FAB10, 28 11/16 inches for the FAB28, 30 3/8 inches for the FAB38 and 31 11/16 inches for the FAB50. Retailer listings sometimes quote one figure and sometimes the other, which explains most of the “conflicting” sizes you see online.
Capacity by Model
Size on the outside does not translate neatly into storage inside, because the curved doors and thick insulated walls take up space. These are the capacities listed for US models:
- FAB5: roughly 1.2 to 1.5 cu ft, depending on the listing. Best for drinks and snacks.
- FAB10: 4.48 cu ft total, with about 3.85 cu ft of fridge space and a 0.64 cu ft freezer compartment.
- FAB28: about 9.5 cu ft total, with an internal freezer compartment just under 1 cu ft.
- FAB32: about 11.7 cu ft total, split into roughly 8.2 cu ft of fridge and 3.5 cu ft of frost-free freezer drawers.
- FAB38: about 18 cu ft total, the largest bottom-freezer model in the family.
- FAB50: about 18.5 cu ft net (about 19.3 cu ft gross), with a top freezer of about 4.4 cu ft.
For comparison, a typical full-size American top-freezer refrigerator holds about 18 to 21 cu ft, and a standard French-door model often holds 25 cu ft or more. Only the FAB38 and FAB50 come close to a primary fridge for a family. The FAB28 and FAB32 suit couples, small households, apartments and secondary kitchens.
Door Swing and Clearance
The retro doors are thick and rounded, and they swing out in a wide arc. That is where most fit problems happen.
Front clearance
Look at the “depth with door open” figures. The FAB28 and FAB32 need about 47 1/8 inches from the wall to the front of the open door. The FAB38 needs about 52 3/4 inches, and the FAB50 needs nearly 58 inches. Add room to stand in front of the open door and you want a clear aisle of at least 36 to 42 inches in front of the cabinet face.
Side clearance
Width with the door open is larger than the cabinet width. The FAB28 needs about 36 7/16 inches across with its door open to 90 degrees, and the FAB50 needs about 46 5/8 inches with both doors open. If the hinge side sits against a wall or a tall pantry, the door may not open far enough to pull out drawers and shelves. One retailer listing for the FAB5 recommends leaving about 12 1/2 inches beside the hinge side so the door can open properly.
Hinge side
Many US models are sold in separate left-hinge and right-hinge versions rather than as reversible units, and some colors come in only one hinge direction. Choose the hinge so the door opens toward the counter where you set food down, not into a wall.
How to Measure Your Space
A laser distance measure makes it quick to check width, height and depth in one pass, though a tape measure works too. Follow these steps:
- Measure the opening width at the top, middle and bottom. Use the smallest number.
- Measure the height from the finished floor to the underside of any cabinet above. Floors are rarely level, so measure at both sides.
- Measure the depth from the back wall to the front edge of the counter or cabinet face.
- Note the location of the outlet and any water line, baseboard or trim that sits behind the fridge.
- Measure the aisle in front of the opening and the space beside the hinge side.
- Measure the delivery path: doorways, hallway turns and stairs. Tall models like the FAB38 and FAB50 ship in boxes larger than the fridge itself.
Compare each measurement with the Smeg fridge dimensions in the chart, then add ventilation space. Follow the clearance figures in the installation manual for the specific model, since retro fridges vent heat from the back and need airflow to run efficiently.
Fitting a Retro Fridge Into Standard Cabinets
American kitchens are usually built around fridge openings of about 30, 33 or 36 inches wide, with standard base cabinets 24 inches deep plus a countertop overhang of roughly 1 inch. That creates a few predictable outcomes:
- 24-inch openings: the FAB28 and FAB32 are designed for this width class, but plan for the curved door and handle to sit proud of the counter by several inches.
- 30-inch openings: the FAB38 fits with room to spare at about 27.8 inches wide. Fill the gap with a filler strip or leave it open for airflow.
- 33- or 36-inch openings: the FAB50 at about 31.3 inches wide fits a 33-inch opening. In a 36-inch opening any model will look undersized unless you add a cabinet panel or narrow pull-out beside it.
- Under-counter spots: the FAB5 fits under most counters, and the FAB10 at just over 38 inches tall is too tall for a standard 34 1/2-inch base cabinet height, so it usually stands alone.
Smeg fridge dimensions also explain why built-in looks are hard to achieve. Because these models are freestanding and visually bold, many owners place them at the end of a cabinet run or in a nook rather than boxing them in. That also solves the door-swing problem.
Troubleshooting Fit Problems
The fridge fits but the door will not open fully. The hinge side is too close to a wall or tall cabinet. Move the fridge, choose the opposite hinge version, or add a spacer panel.
The fridge sticks out past the counters. This is normal for most models. If it bothers you, check whether the back wall can be recessed between studs (a framing job for a pro) or accept the retro look as a freestanding piece.
It runs warm or noisy. Check rear and top clearance and make sure the cabinet above is not trapping heat. Plug the fridge directly into a wall outlet rather than an extension cord or power strip.
It wobbles on an uneven floor. Adjust the leveling feet so the unit sits steady and tilts very slightly back, which helps the doors close on their own.
Price Range and When to Call a Pro
Retro fridges cost more than plain models of similar capacity. As a general guide, the mini models start around the price of a premium mini fridge and climb into the low thousands, while the large two-door models usually run several thousand dollars. Special editions and decorated doors cost more.
Most installs are simple: unbox, level, plug in and wait for the unit to cool. Call a carpenter or cabinet installer if you need to cut down a cabinet, add a filler panel or change an opening. Call a licensed electrician if there is no dedicated, properly grounded outlet in the right spot, since adding or moving an outlet is not a DIY task.
Frequently Asked Questions
What size is the most popular Smeg fridge?
The FAB28 is the classic single-door retro fridge most people picture. It measures about 23 11/16 inches wide, 60 1/4 inches tall and 30 1/4 inches deep with the handle, and holds about 9.5 cu ft.
Will a Smeg fridge fit a standard 36-inch fridge opening?
Every model will physically fit, but the largest, the FAB50, is only about 31.3 inches wide, so it leaves a gap of nearly 5 inches. Use filler panels or choose the opening size before you buy.
How deep is a Smeg fridge with the handle?
Depth with the handle ranges from about 23 inches for the FAB5 to about 33 1/2 inches for the FAB50. The 24-inch-wide FAB28 and FAB32 are each about 30 1/4 inches deep with the handle.
Can I change the door hinge side?
Many US models come as separate left-hinge and right-hinge versions, and some colors are offered in only one direction. Check the model code and the product listing before ordering.
How much room do Smeg fridges need for ventilation?
Each model’s installation manual lists the required gaps at the back, sides and top. Follow those figures exactly, because a fridge without enough airflow works harder and may not hold temperature.
Is the FAB32 taller than the FAB28?
Yes. Both are about 23.7 inches wide, but the FAB28 is about 60 1/4 inches tall while the FAB32 is about 77 1/2 inches tall because it adds a separate bottom freezer.