Murray is a long-running budget lawn mower brand aimed at homeowners who want a simple, affordable machine for basic yard care. A Murray lawn mower keeps things straightforward — a reliable Briggs & Stratton engine, a steel deck, and easy availability at Walmart and other big-box stores. This guide covers the current models, specs, real prices, and how to keep one cutting for years.
- The Murray Brand Today
- Types of Murray Mowers
- Engine Specifications
- Deck Sizes
- Typical Costs
- How to Choose the Right Murray
- Setup and First Start
- Maintenance Routine
- Finding Parts
- Troubleshooting Common Problems
- Storage Tips
- Safety Notes
- Understanding the Briggs & Stratton Engine
- Getting a Clean, Even Cut
- How Long a Murray Mower Lasts
- Front-Wheel vs. Rear-Wheel Drive
- Comparing Murray to Other Budget Brands
- Final Takeaway
The Murray Brand Today
Murray has a long history and is now owned by Briggs & Stratton, which supplies the engines on most models. Sold primarily through Walmart, Murray positions itself as an entry-level, value-focused brand. You won’t find premium features, but you get a dependable mower at one of the lowest prices in the category, with parts that are easy to source.
Types of Murray Mowers
Murray focuses on walk-behind gas mowers:
- Push mowers: You provide the forward motion. Lightest and cheapest, good for small flat yards.
- Self-propelled mowers: Front or rear-wheel drive pulls the mower forward, easing larger yards and slopes.
- High-wheel models: Larger rear wheels roll more easily over uneven ground.
Most offer 3-in-1 capability — bag, mulch, and side discharge — with the bag and mulch plug included.
Engine Specifications
Murray mowers use Briggs & Stratton engines, typically rated by cc and torque rather than horsepower:
- 140cc-150cc: Common on 20-21 inch push and self-propelled models.
- 163cc-190cc: On larger 21-22 inch decks for thicker grass.
Engines feature a primer bulb or ReadyStart system that eliminates priming and choking on many models, simplifying cold starts.
Deck Sizes
Deck width sets how much grass you cut per pass and how big a yard the mower suits:
- 20-inch deck: Small yards and tight spaces.
- 21-inch deck: The standard, good for most quarter-acre lots.
- 22-inch deck: Slightly faster mowing on medium yards.
Cutting-height adjustment is usually a single lever or a few individual wheel levers, with heights from about 1.25 to 3.75 inches.
Typical Costs
Affordability is Murray’s main appeal:
- Push mowers: about $180-$250.
- Self-propelled models: about $270-$380.
- High-wheel self-propelled: about $300-$400.
These prices undercut most competitors, making Murray a solid choice for budget-conscious buyers with simple needs.
How to Choose the Right Murray
Match the mower to your yard:
- Small flat yard: A 20-21 inch push mower is enough.
- Medium yard or slopes: Choose self-propelled to save effort.
- Bumpy or uneven ground: A high-wheel model rolls easier.
- Lots of clippings: Confirm the bag capacity and mulching capability.
Setup and First Start
New Murray mowers need minimal assembly:
- Unfold and secure the handle with the knobs.
- Attach the grass bag or install the mulch plug.
- Add engine oil — most take about 15-20 oz of SAE 30 or 5W-30, and they ship without oil.
- Fill with fresh gas (10% ethanol max).
- Prime if equipped, then pull to start.
Maintenance Routine
Basic upkeep keeps a Murray running:
- Change the oil after the first 5 hours, then every season or 25-50 hours.
- Replace or clean the air filter annually.
- Replace the spark plug each season for easy starting.
- Sharpen or replace the blade once or twice a year for a clean cut.
- Clean under the deck after mows to prevent grass buildup and rust.
Finding Parts
Because Murray uses Briggs & Stratton engines and common components, parts are widely available. Blades, air filters, spark plugs, belts, and bags are stocked at Walmart, hardware stores, and online. When ordering, note your model and serial number, usually found on a label under the deck or on the handle, to get the correct fit.
Troubleshooting Common Problems
Most Murray issues have simple fixes. If it won’t start, check for fresh fuel, a clean air filter, and a good spark plug; stale gas is the number one cause after winter. If the engine surges or dies, the carburetor may be gummed and need cleaning. If the mower won’t self-propel, inspect the drive belt and cable. A poor, uneven cut usually means a dull blade or a deck clogged with clippings.
Storage Tips
Before winter, run the tank dry or add fuel stabilizer to protect the carburetor, disconnect the spark plug, clean the deck, and store the mower in a dry space. In spring, replace the oil, install a fresh plug if needed, sharpen the blade, and it should start right up.
Safety Notes
Always mow in closed shoes and long pants, and clear the yard of rocks and sticks that can become projectiles. Never reach under the deck with the engine running or the plug connected, mow across slopes rather than up and down with a walk-behind, and keep children and pets away from the work area.
Understanding the Briggs & Stratton Engine
Because Murray is owned by Briggs & Stratton, its mowers use B&S engines that are among the most common small engines in America. That’s a genuine advantage: parts, spark plugs, air filters, and service knowledge are everywhere, and any small-engine shop can work on them. Many models feature the ReadyStart system, which uses a temperature-and-altitude-sensing carburetor to eliminate priming and choking — you simply pull the cord. Other models use a primer bulb you press a few times before starting. Knowing which system your engine has makes cold starts far easier.
Getting a Clean, Even Cut
A good cut is more about technique than machine, and a few habits make any Murray mow better:
- Never remove more than one-third of the grass height in a single pass to avoid stressing the lawn.
- Mow when grass is dry for a cleaner cut and less clumping.
- Overlap each pass slightly to avoid missed strips.
- Keep the blade sharp so it slices rather than tears the grass tips.
- Alternate your mowing direction each week to help the grass stand upright.
How Long a Murray Mower Lasts
Budget mowers get a reputation for short lifespans, but a Murray can last 7-10 years or more with basic care. The engine, being a Briggs & Stratton, is generally reliable; the parts most likely to wear are the blade, belts, wheels, and the deck, which can rust if not kept clean. Homeowners who change the oil each season, keep the air filter clean, use fresh fuel, and store the mower dry get the most life out of it. For a mower in this price range, that longevity makes Murray a reasonable value rather than a disposable purchase.
Front-Wheel vs. Rear-Wheel Drive
Murray’s self-propelled models come in front-wheel and rear-wheel drive, and the difference affects how the mower handles. Front-wheel drive is easier to maneuver — you can tip the mower up on its rear wheels to turn without disengaging the drive, which suits flat yards with lots of obstacles like trees and flower beds. Rear-wheel drive provides better traction on slopes and when the grass bag is full and heavy, because the weight sits over the driven wheels. If your yard is hilly or you bag a lot of clippings, choose rear-wheel drive; for a flat lot with many turns, front-wheel drive is more convenient.
Comparing Murray to Other Budget Brands
In the budget mower segment, Murray competes with brands like Yard Machines, Bolens, and PowerSmart, as well as the lower end of Craftsman and Troy-Bilt. Murray’s edge is its Briggs & Stratton engines and Walmart availability, which make parts and service easy to find. It won’t match the build quality, features, or longevity of premium brands like Honda or Toro, but it also costs far less. For a homeowner with a small flat yard and a tight budget who wants a simple, no-frills mower backed by a familiar engine maker, Murray is a sensible value pick that gets the basic job done.
Final Takeaway
A Murray lawn mower is a sensible, low-cost choice for homeowners with small-to-medium yards who want a simple, dependable machine without premium-brand pricing. Backed by Briggs & Stratton engines and easy-to-find parts, it rewards basic maintenance — fresh fuel, a clean filter, a sharp blade, and a yearly oil change — with many seasons of reliable cutting.