Home Improvement

Sump Pump for Pool: Draining, Cover Water, and Winterizing

Sump Pump for Pool: Draining, Cover Water, and Winterizing
Disclosure: This post may contain affiliate links. We may earn a small commission if you purchase through our links, at no extra cost to you. Learn more.

Every pool owner eventually faces a job the built-in filter pump can’t do — pumping the pool down for repairs, clearing the lake of rainwater that pools on the winter cover, or emptying a hot tub — and reaching for the wrong tool can crack a plaster shell or void a liner warranty. A sump pump for pool tasks is the go-to solution, but only if you match the pump type and flow rate to the job and discharge the water where it won’t flood your yard or your neighbor’s. Get it right and you’ll clear hundreds of gallons in minutes; get it wrong and you risk damaging the pool structure or burning out the pump. Here’s how the pros handle it.

When You Actually Need a Sump Pump

Your pool’s circulation pump moves water through the filter, but it’s not designed to empty the pool or pull standing water off a cover. That’s where a portable sump or utility pump earns its keep. Common jobs include:

  • Draining the pool for acid washing, liner replacement, or plaster repair
  • Removing rainwater and snowmelt that collect on a winter safety cover
  • Lowering the water level before winterizing or after heavy rain
  • Emptying a spa or hot tub for cleaning or service
  • Clearing flooded pump pits or equipment pads after storms

For nearly all of these, a portable submersible pump is the right tool because you can drop it in, pump the water, and pull it back out.

Sump Pumps & Backups on Amazon

  • Submersible & pedestal pumps
  • Battery backup systems
  • Check valves & float switches
  • Discharge hose kits
  • High-water alarms

Shop Sump Pumps & Backups on Amazon →

As an Amazon Associate, we earn from qualifying purchases.

Submersible vs. Cover Pumps

Two categories cover most pool tasks. A standard submersible utility pump sits at the bottom of the pool or pit and moves large volumes fast — ideal for draining the pool for repairs. These typically handle 1,500 to 3,000 gallons per hour and pump down to within an inch or so of the surface they sit on.

A cover pump is a smaller, purpose-built submersible designed to sit on top of a winter cover and remove rainwater before it pools and stresses the cover. Many cover pumps are automatic, switching on when water reaches a set depth and off when it drops, so they run unattended all winter. If your main need is keeping the winter cover clear, buy a dedicated automatic cover pump rather than repurposing a big utility pump.

Sizing the Pump: Gallons Per Hour

Flow rate, measured in gallons per hour (GPH), determines how long a job takes. To estimate drain time, divide your pool volume by the pump’s GPH. A 20,000-gallon pool drained with a 2,000 GPH pump takes about 10 hours in ideal conditions — longer in reality, because flow drops as the water level falls and the discharge hose adds resistance.

Remember that “head” — the vertical lift and hose length — cuts real-world output well below the rated maximum. A pump rated 3,000 GPH at zero lift might deliver only 1,800 GPH when pushing water up and out 50 feet. For draining a full pool, choose a pump rated well above your minimum so the job finishes in a reasonable time. For cover water, a modest 500 to 1,500 GPH automatic pump is plenty.

The Critical Rule: Don’t Fully Drain a Pool Carelessly

Here’s the mistake that turns a routine drain into a five-figure repair. A completely empty in-ground pool can literally float out of the ground. Groundwater pressure under and around the empty shell — called hydrostatic pressure — can push a fiberglass or vinyl pool up and out of position, or crack a plaster shell. Vinyl liners can also shrink and shift once the water that holds them in place is gone.

Before fully draining any in-ground pool, understand your hydrostatic relief situation and the water table. Many pools have a hydrostatic relief valve or plugs in the main drain that must be opened to relieve pressure. Unless you have a specific reason and the right precautions, don’t drain an in-ground pool completely — and never leave it empty during rainy periods or a high water table. When in doubt, have a pool professional handle a full drain.

Where to Discharge the Water

Pool water is chlorinated and sometimes chemically treated, so you can’t just dump it anywhere. Improper discharge can kill lawns, run into storm drains where it’s illegal in many areas, or flood a neighbor’s property. Follow these guidelines:

  1. Check local rules — some municipalities regulate pool draining and require discharge to the sanitary sewer, not the storm drain.
  2. Let chlorine dissipate — stop chlorinating a few days before draining so chlorine levels drop, protecting plants and waterways.
  3. Discharge slowly to a safe area — spread the water across your own lawn or a designated point, away from the pool so it doesn’t undermine the shell or float it.
  4. Keep water away from foundations — direct the hose well clear of your house and the pool deck.

A long discharge hose lets you route water to the right spot. Match the hose to the pump’s outlet size and avoid unnecessary length that saps flow.

Setting Up and Running the Pump

Setup is simple but worth doing carefully. Attach the discharge hose, place the pump at the lowest point of the pool or on the cover, and make sure the intake won’t clog with leaves or debris — many pumps have a strainer base for this. Plug into a GFCI-protected outlet, always, since you’re mixing electricity and water; never use an ungrounded outlet or a damp extension cord connection.

Monitor the pump while it runs, especially as the water gets low. Most submersibles must stay submerged or at least keep water flowing to cool the motor — running one dry burns it out fast. Automatic cover pumps handle this with float switches, but manual utility pumps need you to shut them off before they suck air. Pull the pump before the water drops below its minimum operating level.

Choosing the Right Hose and Accessories

The discharge hose matters more than people expect. A hose that’s too narrow chokes the pump’s output, so match the hose diameter to the pump’s outlet — a 1-1/2 inch or larger discharge moves water far faster than a garden hose thread. For draining a full pool, a wide-diameter lay-flat discharge hose clears water quickly and rolls up compactly for storage between uses.

Keep a few accessories on hand to make the job smoother: a length of extra hose to reach a safe discharge point, a strainer or intake screen to keep leaves and debris from clogging the pump, and a GFCI-protected extension cord rated for outdoor and wet use if your outlet is far from the pool. A small automatic cover pump with its own float switch is worth owning outright if you close the pool each winter, since it pays for itself the first season it saves your cover from a load of standing water.

Common Mistakes to Avoid

A handful of errors cause most pump problems. Running a manual utility pump dry — letting it keep running after the water drops below its intake — burns out the motor quickly, so watch the level and pull the pump in time. Using an undersized pump for a full drain leaves you waiting all day and can overheat the unit; size the pump to the job. Placing the pump on loose sediment lets debris get sucked into the impeller and clog it, so set it on a solid surface or use the strainer base.

The most costly mistake, though, is fully draining an in-ground pool without relieving hydrostatic pressure or accounting for the water table, which can float or crack the shell. When in doubt about a full drain, lower the water only partway for maintenance or hand the full drain to a pool professional. Respecting these limits keeps a simple water-removal task from turning into pump replacement or, far worse, pool structural damage.

Winterizing With a Sump Pump

For closing the pool, a sump pump lowers the water below the skimmer and returns before you blow out and plug the lines. Then, through the off-season, an automatic cover pump keeps rain and snowmelt from accumulating on a solid winter cover, where the weight can tear the cover or pull it into the pool. Set the cover pump in the center low spot and check it periodically to confirm the intake hasn’t clogged with leaves.

Used correctly, a sump pump for pool maintenance is one of the most versatile tools an owner can keep on hand — sizing it to the task, protecting the pool from being over-drained, and discharging the water responsibly are what separate a quick, safe job from an expensive mistake. Keep a properly sized utility pump for draining and a dedicated automatic cover pump for winter, run both on GFCI power, and you’ll handle every water-removal job your pool throws at you.

Get Free Foundation & Waterproofing Quotes from Local Pros