One wall, 144 inches, and every appliance has to share it. That sounds limiting, yet a well-planned 12-foot one wall kitchen layout can cook a full dinner without anyone tripping over a door. The trick is getting the order and the spacing right to the inch, because a single misplaced cabinet can leave the range jammed against the fridge or the sink with no counter for dirty dishes.
Part of our Kitchen Remodeling guide — explore the full guide →
The short answer: put the refrigerator at one end, center the sink roughly in the middle, and place the range with at least 15 inches of counter on each side. A typical sequence is fridge, prep counter, sink, dishwasher, counter, range, counter. Uppers or open shelves run over the counters, with a hood over the range and a tall pantry or the fridge anchoring the end.
- The Inch-by-Inch 12-Foot One Wall Kitchen Layout
- Why the Fridge Goes at the End
- Sink in the Middle, Range with Landing Space
- Uppers, Open Shelves and the Hood
- Step-by-Step Planning Process
- Electrical, Plumbing and Gas
- Troubleshooting a One-Wall Plan
- Typical Costs
- When to Call a Licensed Professional
- Frequently Asked Questions
Here is an inch-by-inch plan, the alternatives worth considering and the utility and installation details that make the plan work in a real room.
The Inch-by-Inch 12-Foot One Wall Kitchen Layout
Start with standard appliance sizes: a 36-inch refrigerator opening, a 30-inch range, a 24-inch dishwasher and a 30 to 33 inch sink base. Here is one plan that fits exactly into 144 inches, reading left to right:
| Item | Width | Running total |
|---|---|---|
| Refrigerator opening | 36 in | 36 in |
| Prep counter base (drawers) | 15 in | 51 in |
| Sink base | 30 in | 81 in |
| Dishwasher (counter over it) | 24 in | 105 in |
| Range | 30 in | 135 in |
| End counter base | 9 in | 144 in |
That version keeps full-size appliances, but the range gets only the 24 inches of counter over the dishwasher on one side and a skinny 9 inches on the other. If you want 15 inches of landing space on both sides of the range and the sink centered, trim the appliances instead. A more balanced plan looks like this, reading left to right:
- Refrigerator: 30 inches (apartment-size or narrow model) at the left end.
- Prep counter: a 12-inch drawer base or pull-out.
- Dishwasher: 18 inches, right beside the sink.
- Sink base: 24 inches, centered on the wall at the 72-inch mark.
- Landing counter: a 15-inch base.
- Range: 30 inches, slide-in or freestanding.
- End counter: 15 inches, or a 12-inch base plus a 3-inch wall filler.
Adding those up (30 + 12 + 18 + 24 + 15 + 30 + 15) gives exactly 144 inches. The trade-off is a smaller sink and a narrower fridge, so decide which matters more in your household: refrigerator capacity or counter on both sides of the burners. If the end of the run is open to a room rather than a wall, you can extend the counter a little or add a finished end panel instead.
Why the Fridge Goes at the End
A refrigerator is tall and deep. Put it in the middle of a single wall and it splits the counter into two short pieces, blocks light, and its door swings across the work zone. At the end, it acts like a bookend, with the door opening away from the counters or toward a landing area. Set the hinge on the wall side so the door opens toward the prep counter, and leave about 1 inch on the hinge side for the door to clear the wall.
If the end is against a wall, check that the door can open past 90 degrees for crisper drawers to slide out. A tall pantry cabinet can sit beside the fridge if you shorten the counters, which gives a very built-in look.
Sink in the Middle, Range with Landing Space
Centering the sink keeps it close to both the fridge and the range, which makes the single-wall “work line” efficient. Place the dishwasher immediately next to the sink, on either side, so drain and supply lines stay short. Avoid putting the dishwasher right beside the range if possible, because both doors drop into the same floor space.
For the range, about 15 inches of counter on each side gives room for hot pots and keeps handles away from the end of the run. If your kitchen opens into a living room, a slide-in range gives a cleaner line with the counters and lets the backsplash run behind it. Freestanding ranges have a back panel and are often less expensive. Either way, follow the maker’s clearances to combustible cabinets and walls, especially the side clearance to a tall cabinet or the fridge.
Uppers, Open Shelves and the Hood
In a 12-foot one wall kitchen layout, every inch of vertical space matters. Common options:
- Full uppers: 30 to 42 inches tall, 12 inches deep, mounted about 18 inches over the counter. Stretch them to the ceiling for maximum storage.
- Open shelves: lighter visually and great over the sink or prep counter, but they collect dust and grease near the range.
- Mixed: closed uppers over the fridge and range zones, open shelves in the middle.
- Range hood: mount it at the height the hood and cooktop makers specify, and vent it outdoors when possible.
A cabinet over the fridge, 24 inches deep, is easier to reach than a 12-inch one set behind the fridge top.
Step-by-Step Planning Process
- Measure the wall at counter height in several spots; walls are rarely perfectly straight.
- Mark utilities: water supply, drain, gas line, panel and existing receptacles.
- Choose appliances and get their exact cutout widths before buying cabinets.
- Draw the elevation at 1/2 inch per foot, starting with the fridge and range, then fill with cabinets in 3-inch increments and fillers at walls.
- Check clearances for door swings, landing areas and the 42 to 48 inches of open floor in front of the run.
- Plan flooring: tile or sheet goods can run under the cabinets, while floating floors usually go around them. Keep floor height in mind so the dishwasher can still be removed.
- Install uppers first on a ledger, screwing through the hanging rail into at least two studs per box, then set bases level and fasten them to studs.
Electrical, Plumbing and Gas
A single wall packs nearly every kitchen circuit into one place. Plan dedicated circuits for the range, dishwasher, disposal, microwave and refrigerator, plus GFCI-protected countertop receptacles. New or relocated circuits are a licensed electrician’s job with a permit. For simple fixture swaps on existing circuits, turn off the breaker and confirm it is off with a non-contact voltage tester, and never work on live wiring.
Moving the sink or dishwasher means moving plumbing, which is licensed plumber work with permits. A gas range needs a licensed gas fitter for the connection and leak test, carbon monoxide alarms in the home, and the clearances in the installation manual. If you ever smell gas, leave and call the utility.
Troubleshooting a One-Wall Plan
- Not enough counter: drop to an 18-inch dishwasher or a 24-inch range, or add a rolling cart across from the wall.
- Doors collide: keep at least one cabinet between the dishwasher and range.
- Range tight to the wall: add a filler and check the maker’s side clearance.
- Cramped feeling: swap one section of uppers for shelves and use light finishes.
Typical Costs
A 12-foot one wall kitchen layout is among the most affordable plans because it uses the fewest cabinets and keeps plumbing in one wall. Stock cabinets for 12 ft often fall in the low thousands of dollars, with counters adding several hundred to a few thousand depending on material. Appliances vary the most, and relocating gas, plumbing or circuits can add substantially, so keep utilities where they already are when you can.
When to Call a Licensed Professional
Hire a licensed electrician for new circuits and outlets, a licensed plumber for sink and dishwasher moves, and a licensed gas fitter for gas ranges. Most areas require permits for this work. An experienced installer will also scribe cabinets to an uneven wall and anchor them properly.
Frequently Asked Questions
What is the best order for appliances on a single kitchen wall?
Fridge at one end, then prep counter, sink and dishwasher in the middle, followed by counter, range and a final counter at the far end.
How much counter do you need next to a range?
About 15 inches on each side is a good target. At minimum, keep 12 inches on both sides so pot handles and hot pans have somewhere safe to go.
Can a 12-foot wall fit a full-size fridge, range and dishwasher?
Yes. A 36-inch fridge, 30-inch range, 24-inch dishwasher and 30-inch sink base fit, though counter space beside the range gets tight.
Should a one-wall kitchen have upper cabinets?
Uppers add a lot of storage. Many homeowners mix closed uppers near the fridge and range with open shelves in the middle for a lighter look.
Is a slide-in range better for a one-wall kitchen?
A slide-in range gives a built-in look and lets the backsplash run behind it, which suits open plans. Freestanding models work too and often cost less.