Home Improvement

Indoor Outdoor Fireplace: See-Through Designs and Costs

Indoor Outdoor Fireplace: See-Through Designs and Costs

Picture a single flame visible from the sofa and from the patio lounge chairs at the same time. An indoor outdoor fireplace makes that possible by setting a see-through firebox into an exterior wall, with one glass face toward the living room and the other toward a porch, deck or patio. It is one of the most striking features you can add to a home, and it is also one of the more technical fireplace projects to plan.

The key difference from an ordinary two-sided fireplace is that one side faces the weather. That means the unit must be specifically rated for indoor-outdoor installation, the glass and seals must keep outdoor air, rain and insects out of the house, and the wall opening must be framed, insulated and flashed like a window. Nearly all modern versions are gas, usually direct vent, and they require a licensed installer, permits and careful structural work.

If you are weighing whether one fits your home and budget, start with how these units are built and what the wall has to do around them.

How an Indoor Outdoor Fireplace Works

A typical indoor outdoor fireplace is a factory-built gas firebox listed for installation through an exterior wall. The indoor face has sealed ceramic glass that keeps combustion gases and outdoor air out of the living space. The outdoor face may have glass, a screen, or a weather-resistant door, depending on the model. Combustion air is drawn from outside, and exhaust leaves through a direct vent pipe, so the house envelope stays sealed.

Because the firebox straddles two climates, manufacturers design it to handle temperature differences, moisture and wind on the outdoor side. Controls are usually placed indoors, with a remote or wall switch. Some models let you use only the indoor side on cold nights, or light the outdoor side for patio gatherings.

Indoor-outdoor units vs double-sided interior inserts

A double-sided fireplace indoor outdoor model is not the same as a two-sided interior insert set between a living and dining room. Interior see-through units are designed with both faces inside conditioned space. Installing one in an exterior wall can let cold air, moisture and pests into the home and void the listing. Always choose a unit explicitly rated for indoor-outdoor use.

Design Options for See-Through Outdoor Fireplaces

A see through outdoor fireplace can take several forms depending on your wall, style and budget:

  • Linear gas units: long, low fireboxes with a ribbon of flame over glass media. They suit modern homes and wide walls.
  • Traditional log sets: taller, more conventional openings with ceramic logs for a classic look on both sides.
  • Masonry surrounds: stone or brick on the outdoor face that ties into patio hardscape, with drywall, tile or stone indoors.
  • Porch-integrated designs: the outdoor side opens to a covered porch or screened room, extending the use of that space.

Two sided outdoor fireplace designs built entirely outside, such as a freestanding masonry fireplace that divides a patio from a pool area, are a different category. Those are fully outdoor structures with their own footing and chimney, and they do not involve the house wall at all.

Glass, Sealing and Weather Protection

Sealing is what makes or breaks an indoor-outdoor installation. Pay attention to:

  • Indoor glass: fixed, gasketed ceramic glass separates the home from the firebox. It should never be removed while the fireplace is operating.
  • Outdoor face: glass, mesh screens or doors protect against wind, rain and debris. Some models include covers for the off-season.
  • Wall flashing: the rough opening needs proper flashing, sill pans and sealant, just like a window or door, to keep water out of the wall cavity.
  • Insulation and air sealing: the framing around the firebox should be insulated and air sealed to the manufacturer’s specifications so the unit does not become a cold spot.
  • Safety barriers: hot glass on either side can burn skin. Use the included safety screens, especially with children and pets around.

Handle glass panels with care during installation and maintenance. Wear gloves and eye protection, use two people for large panels, and never flex or strike glass edges.

Framing Through an Exterior Wall

Cutting a large opening into an exterior wall is structural work. Most exterior walls are load bearing, so the opening needs a properly sized header, jack studs and king studs to carry the load around the firebox. The manufacturer specifies rough opening size, clearances to combustibles, and whether noncombustible materials must surround the unit.

  1. Confirm permits and plans. Most jurisdictions require permits for structural changes, gas lines and vented appliances.
  2. Engineer the opening. A builder or structural engineer sizes the header and confirms the wall can handle the new load path.
  3. Plan the vent route. Direct vent pipes may run up through the roof or out the wall, and must meet clearance rules to windows, doors and soffits.
  4. Run the gas line. A licensed gas contractor sizes the line for the BTU rating, installs a shutoff valve and pressure tests the system.
  5. Install and seal the unit. The firebox is set, anchored and flashed, and the wall is insulated and air sealed around it.
  6. Finish both faces. Noncombustible finishes go where required, with a hearth or ledge as specified.

If the outdoor side opens to a patio or deck with a heavy stone surround, that masonry may need its own footing. Call 811 before digging, and anchor any outdoor structures into footings or framing as designed for wind and snow loads.

Looking to buy Indoor Outdoor Fireplace? Compare top-rated options.
Shop on Amazon →Browse Our Shop
As an Amazon Associate we earn from qualifying purchases.

Fire and Carbon Monoxide Safety

Like any gas appliance, an indoor outdoor fireplace must be installed and serviced by licensed professionals. Never attempt to connect or repair gas lines, valves or fittings yourself. If you smell gas, leave the home and call your gas utility from outside.

Install CO alarms on every level of the home and near sleeping areas, and test them monthly. Schedule an annual inspection to check vent integrity, glass gaskets, burners and the pilot assembly. Keep furniture, rugs, cushions and decorations at least 3 feet from both faces, and do not store firewood, propane tanks or flammable items near the outdoor opening.

Troubleshooting Common Issues

  • Drafts or cold air indoors: the unit may not be sealed to the wall properly, or the gasket on the indoor glass is worn. Have the installer inspect it.
  • Condensation or fogging on the glass: normal at startup in cold weather, but persistent fogging can mean a vent or seal issue.
  • Pilot blows out on the outdoor side: wind can affect the flame. Check for a wind guard or ask a technician about adjustments.
  • Water stains around the wall opening: flashing has failed. Fix quickly to prevent rot and mold in the wall.
  • White haze on glass: mineral residue from combustion. Clean with a fireplace glass cleaner once the unit is completely cool.

Indoor Outdoor Fireplace Costs

This is a premium project. As general ranges, expect the total to include:

  • The firebox: indoor-outdoor rated units cost more than standard gas fireplaces because of the dual glass and weatherproof design.
  • Structural framing: header, framing and engineering for the wall opening.
  • Gas and venting: gas line from the meter or manifold, vent pipe, termination cap and roof or wall penetration.
  • Finishes: stone, tile, brick or other noncombustible surrounds on both sides, plus any outdoor hearth or seating.
  • Permits and inspections: building, mechanical and gas permits, depending on your area.

Retrofits into existing homes tend to cost more than new construction because siding, drywall, trim and sometimes roofing must be opened and patched. If you are already planning a patio or porch renovation, bundling the fireplace into that project can lower costs.

When to Call a Licensed Professional

An indoor outdoor fireplace is not a DIY project. You will need a licensed gas contractor for the gas line and appliance connection, a builder or structural engineer for the wall opening and header, and possibly a licensed electrician for blowers, lighting or a switch. A qualified fireplace installer ensures the unit is set and vented exactly as listed. Permits and inspections protect your insurance coverage and resale value, and they confirm the work is done safely.

Frequently Asked Questions

Can any two-sided fireplace be used indoor and outdoor?

No. Only units specifically rated for indoor-outdoor installation should be used in an exterior wall. Interior two-sided inserts are not designed to handle weather or keep outdoor air out of the home.

Are indoor outdoor fireplaces wood burning or gas?

Most modern units are gas, usually direct vent. Wood-burning see-through designs exist, but they are complex, and sealing and code compliance through an exterior wall are more difficult.

Does an indoor outdoor fireplace let cold air into the house?

A properly rated and installed unit should not. Sealed indoor glass, gaskets and correct air sealing around the frame keep the home envelope intact.

Do I need a permit for an indoor outdoor fireplace?

Almost always. Structural changes to an exterior wall, gas lines and vented appliances typically require permits and inspections.

Can I use just one side at a time?

Both faces show the flame whenever it burns, but some models include covers or doors for the outdoor side so you can close it off when you only want the indoor view.