Shopping for a three-wall tub gets confusing fast, because the same 60-inch opening can take a dozen different models at very different prices. A Kohler alcove tub comes in two main materials: acrylic, used in lines like Entity, Archer, Devonshire, Expanse and Underscore, and enameled cast iron, used in Villager, Bellwether and Mendota. Most models fit a standard 60-inch alcove, with widths of 30, 30-1/4 or 32 inches and a choice of left-hand or right-hand drain.
Price tracks material and depth more than anything else. Entity is the budget acrylic option. Archer and Devonshire sit in the middle with deeper soaking water. Cast iron lines cost more and weigh 300 pounds or more, and the deepest acrylic models, like some Underscore versions, sit at the top of the acrylic range.
- Kohler Alcove Tub Lines Compared
- Acrylic Lines: Entity, Devonshire, Archer, Expanse and Underscore
- Cast Iron Lines: Villager, Bellwether and Mendota
- Acrylic vs Cast Iron: Which Material Fits Your Bathroom
- Corner and Shaped Models
- How to Pick the Right Model: A Decision Guide
- Installation Basics
- Cost Expectations
- Troubleshooting Common Alcove Tub Problems
- When to Call a Pro
- Frequently Asked Questions
Model numbers, sizes and depths here come from Kohler’s own product listings and its published water-depth chart. Kohler updates its catalog often, so confirm the exact model number, rough-in and drain side against the current spec sheet before you order.
Kohler Alcove Tub Lines Compared
The table groups the main alcove lines by material. Water depth is depth to the overflow, the most useful real-world measure of how deep a bath you actually get.
| Line | Material | Common alcove sizes | Depth to overflow | Price tier |
|---|---|---|---|---|
| Entity | Acrylic | 60 x 30 in | About 9 in soaking depth | Entry |
| Devonshire | Acrylic | 60 x 32 in | 14 in | Mid |
| Archer | Acrylic | 60 x 30 in, 60 x 32 in | 15 in | Mid |
| Expanse | Acrylic | 60 x 30 in, 60 x 32 in | 12-5/8 in | Mid to upper |
| Underscore | Acrylic | 60 x 30 in, 60 x 32 in | Up to 17-1/8 in | Upper |
| Villager | Enameled cast iron | 60 x 30-1/4 in, 60 x 34-1/4 in | 8-5/8 in | Mid |
| Bellwether | Enameled cast iron | 60 x 30-1/4 in, 60 x 32 in | 9 in (30-1/4 in), 11-5/16 in (32 in) | Mid to upper |
| Mendota | Enameled cast iron | 60 x 32 in | 10-7/8 in | Upper |
Most lines in the table are sold in both left-hand and right-hand drain versions, though not every size comes both ways. Drain side is set by the plumbing in your wall, so check which end your current drain sits on before you compare prices.
Acrylic Lines: Entity, Devonshire, Archer, Expanse and Underscore
Acrylic tubs are vacuum-formed sheets reinforced from underneath. They weigh a fraction of cast iron, which makes them easier to carry up stairs and set into a framed alcove. Acrylic feels warmer to the touch, and Kohler’s acrylic models generally have an integral apron and integral tiling flange so the wall surround laps over the tub edge.
Entity
Entity is the value option, sold as a 60 x 30 inch alcove bath (model 26109, left or right drain). Listings put the soaking depth around 9 inches with a capacity of roughly 42 gallons, and the bottom is textured for grip. It suits rentals, kids’ baths and shower-tub combos where the tub mostly serves as a shower floor.
Devonshire
Devonshire (model 1184, 60 x 32 inches) has a traditional profile and a 14-inch depth to overflow. It pairs well with the Devonshire faucet and accessory collection if you want a matched look. The extra 2 inches of width over a 30-inch tub makes a real difference in shoulder room.
Archer
Archer comes in 60 x 30 inch (model 1946) and 60 x 32 inch (model 1123) versions, with a 15-inch depth to overflow on Kohler’s chart. Its squared, clean-lined interior is a frequent choice for modern remodels, and 15 inches of water is enough for a proper soak in a standard alcove.
Expanse
Expanse is sold in 60 x 30 inch (model 1118) and 60 x 32 inch (model 1100) sizes, with a 12-5/8 inch depth to overflow. The line also includes a curved-apron version whose front bows outward, which adds elbow room at the rim without needing a wider alcove. That is the model people usually mean when they search for a curved Kohler tub.
Underscore
Underscore comes in 60 x 30 inch (model 20201) and 60 x 32 inch (model 1957) alcove versions, and the deepest Underscore listed on Kohler’s chart reaches 17-1/8 inches to the overflow. That depth puts it at the top of the acrylic range in both comfort and price. Check the exact depth for the size you pick, because it varies across the line.
Cast Iron Lines: Villager, Bellwether and Mendota
Enameled cast iron is a heavy iron shell coated with a thick, fused porcelain enamel. It holds heat well, resists scratches better than acrylic and feels very solid underfoot. The trade-off is weight. Kohler’s spec sheets list about 310 pounds for a Bellwether 60 x 30-1/4 and about 351 pounds for a Mendota, before water and a person are added.
Villager
Kohler calls Villager its most popular bath. It comes in 60 x 30-1/4 inch (models 715 left drain, 716 right drain) and 60 x 34-1/4 inch (model 713) versions. Depth to overflow is 8-5/8 inches, which is shallow for soaking but typical for a classic shower-tub combination.
Bellwether
Bellwether is offered at 60 x 30-1/4 inches (models 837 and 838) with a 14-inch apron height and about 9 inches of water depth, and at 60 x 32 inches (models 875 and 876) with a 15-inch apron, wider ledges and 11-5/16 inches to the overflow. The 32-inch version is the better soaking choice.
Mendota
Mendota is a 60 x 32 inch cast iron alcove bath (models 505 and 506) with a 10-7/8 inch depth to overflow. It is designed for one-person bathing and sits at the upper end of Kohler’s cast iron alcove pricing.
Acrylic vs Cast Iron: Which Material Fits Your Bathroom
- Weight and access: Acrylic can be carried by two people. Cast iron usually needs three or four, plus a clear path and sometimes floor reinforcement on older framing.
- Heat retention: Cast iron holds warmth longer once the iron itself warms up. Acrylic feels warmer on first touch and also insulates reasonably well.
- Durability: Cast iron enamel resists scratches and fading but can chip if something heavy is dropped on it. Acrylic resists chipping but scratches more easily and can be buffed.
- Depth options: Kohler’s deepest alcove tubs are acrylic. Cast iron alcove models in the table top out around 11 inches to the overflow.
- Cost: Cast iron typically costs more, both for the tub and for the extra labor of moving and setting it.
Searchers often ask about a Kohler fiberglass tub. Kohler’s main bath lines use acrylic and cast iron rather than fiberglass. The company’s sister brand Sterling sells baths made of Vikrell, a composite material, which is the closest equivalent if you want a lighter, lower-cost shell.
Corner and Shaped Models
Corner tubs are a small part of Kohler’s alcove range compared with standard rectangles. A true corner bath needs a different framing layout, usually takes a corner or angled deck, and often runs larger than 60 inches on its sides. If a corner model is on your list, confirm the rough-in dimensions, the access panel location and whether it is a soaking tub or a whirlpool before you commit, since whirlpools add electrical and pump requirements.
How to Pick the Right Model: A Decision Guide
- Measure the alcove. Measure wall to wall at the back, front and middle, and from the subfloor to the top of the existing tub flange. Most openings are 60 inches long, but older homes can run short.
- Find the drain side. Stand facing the tub. If the drain is on your left, you need a left-hand drain model.
- Decide on depth. If you take baths often, look for 14 inches or more to the overflow. If the tub mostly serves as a shower floor, a shallower, lower-cost model is fine.
- Check the width. A 32-inch tub feels noticeably roomier than a 30-inch one, but it must fit the opening and the wall framing.
- Weigh material vs access. Upper floors, narrow stairs and old joists favor acrylic.
- Budget the drain separately. Kohler alcove baths usually ship without the drain assembly, so plan for a bath drain kit and a drain stopper that matches your faucet finish.
Installation Basics
Every Kohler alcove tub is set level, with its flange fastened to the wall studs and the drain and overflow sealed to the waste line. Acrylic models generally need a bed of mortar or the support method specified in the installation guide so the floor of the tub does not flex. Cast iron tubs rest on ledger boards or the subfloor and rely on their own mass for stability.
Shut off the water supply and drain the lines before removing an old tub. Plumbing changes, such as moving a drain to switch from right-hand to left-hand, may require a permit and a licensed plumber in many areas. The wall surround, whether tile or a panel system, must lap over the tub’s tiling flange and be waterproofed properly, because water that gets behind the flange will rot framing over time.
Cost Expectations
As a general range, entry acrylic alcove tubs like Entity sit in the several-hundred-dollar range, mid-tier acrylic and Villager-class cast iron models commonly run around one thousand dollars, and the deepest acrylic and premium cast iron models go higher. Installation often costs as much as or more than the tub once you add demolition, drain parts, plumbing adjustments and new wall surround work.
Troubleshooting Common Alcove Tub Problems
- Tub floor flexes or creaks: An acrylic tub was set without proper base support. The fix usually means pulling the tub and setting it in mortar as the installation guide calls for.
- Water behind the wall: Check that the surround laps over the flange and that the caulk joint at the tub edge is intact.
- Slow drain: Clear hair from the stopper and strainer first. A hair catcher or a simple drain stopper with a removable basket prevents repeat clogs.
- Chip in cast iron enamel: Small chips can be filled with a porcelain repair kit. Larger damage may need professional refinishing.
When to Call a Pro
Hire a licensed plumber for drain relocation, valve replacement or any job where the supply lines or waste line need to be cut and rejoined. Cast iron tub removal and installation usually needs a crew, and older bathrooms may hide rotted subfloor or framing that a contractor should assess. If the existing wall surround or flooring dates from before the 1980s, have it tested for asbestos before demolition.
Frequently Asked Questions
What size is a standard Kohler alcove tub?
Most Kohler alcove models are 60 inches long and 30, 30-1/4 or 32 inches wide, which fits a standard three-wall tub opening.
Does Kohler make a 60 x 32 alcove tub?
Yes. Archer, Devonshire, Expanse, Underscore, Bellwether and Mendota all include 60 x 32 inch alcove versions.
Is the Kohler Entity tub acrylic?
Yes. Entity is an acrylic alcove bath sold in a 60 x 30 inch size with left-hand or right-hand drain.
Which Kohler alcove tub is deepest?
Among the lines covered here, the deepest Underscore version reaches 17-1/8 inches to the overflow on Kohler’s water-depth chart.
Are Kohler cast iron tubs worth the weight?
They hold heat well and resist scratches, which suits frequent bathers. If access is tight or the tub goes upstairs, a deep acrylic model is usually more practical.