Every paint can says the same thing on the back: “covers 350 to 400 square feet per gallon.” That number assumes you are rolling one coat on a perfectly smooth, already-primed wall. In the real world, most homeowners get 250 to 325 square feet out of a gallon on the first coat and 350 to 400 on the second. Knowing actual paint coverage per gallon saves two trips to the store mid-project and keeps you from ending up with a quarter-gallon of custom color you can never match again.
Part of our Paint & Walls guide — explore the full guide →
The Baseline Numbers
Here is what a gallon of standard latex paint actually covers per coat on common surfaces:
- Smooth drywall, primed: 350-400 sq ft
- Smooth drywall, unprimed: 200-275 sq ft
- Textured drywall (knockdown or orange peel): 275-325 sq ft
- Heavy texture (popcorn, stucco): 150-225 sq ft
- Wood siding: 200-275 sq ft
- Brick or masonry: 100-200 sq ft
- Raw wood trim: 250-300 sq ft
- Previously painted trim: 350-400 linear feet (standard baseboard)
Calculating Square Footage
Measure wall height and the total perimeter of the room. Multiply to get gross wall area. Subtract 20 sq ft per standard window and 21 sq ft per standard door. Do not subtract smaller features.
Example: A 12×14 room with 9-foot ceilings, 2 windows, and 1 door
- Perimeter: (12+14) x 2 = 52 feet
- Wall area: 52 x 9 = 468 sq ft
- Subtract: 468 – (2×20) – 21 = 407 sq ft
- Two coats: 407 x 2 = 814 sq ft of coverage needed
- Divide by 350: 2.3 gallons, round up to 3 gallons
Why You Always Need Two Coats
Single-coat coverage claims are marketing. Even premium “paint and primer in one” products need two coats to deliver a uniform finish, especially when:
- Changing colors (any meaningful color shift)
- Covering dark paint with light
- Painting over patches or primer spots
- Using deep, vibrant, or red tones
- Painting new drywall
Getting away with one coat only happens when you refresh the same color on a clean wall. Even then, one coat is usually thinner than it looks under wet paint.
Primer Changes the Math
Primer covers 200 to 300 sq ft per gallon and is cheaper than topcoat, so prime anything questionable. Situations that require primer regardless of paint claims:
- New drywall or patched drywall
- Raw wood or MDF
- Stains (water, smoke, grease, crayon) need stain-blocking primer like Zinsser BIN or Kilz Original
- Glossy paint (sand and prime or use a bonding primer like STIX)
- Color shifts of more than 2 shades on the paint fan
Tinting primer to a color close to your topcoat reduces topcoat needed by 15 to 20 percent.
Factors That Eat Into Coverage
- Rolling technique: Heavy-nap rollers on smooth walls waste paint. Use 3/8-inch nap on smooth walls, 1/2-inch on textured
- Spraying vs rolling: Sprayers lose 20 to 30 percent to overspray indoors
- Temperature and humidity: Thin paint covers less. Do not thin unless the can allows it
- Paint quality: $20 gallons have less solids and cover 20 percent less than $60 gallons per coat
- Surface porosity: Cedar, fir, MDF, and new plaster suck paint. Prime first
Ceiling Math
Ceilings take more paint per square foot than walls because you lose so much to splatter and overlap. Figure 300 sq ft per gallon on smooth ceilings and 225 sq ft on textured or popcorn. For a 12×14 room:
- Ceiling area: 168 sq ft
- Two coats: 336 sq ft
- Paint needed: just over 1 gallon. Buy 1 gallon plus a quart for touch-up
Trim and Doors
Semi-gloss and satin trim paint covers about 350 linear feet of standard 4-inch baseboard or 300 sq ft of trim including door frames and crown. For doors, figure 1 quart per 4 to 6 interior doors (both sides) with two coats. Cabinet doors are different. An average kitchen with 25 doors and drawer fronts needs 1 to 1.5 gallons of cabinet paint for two coats plus a coat of primer.
Exterior Paint Math
Exterior surfaces are more porous and typically need more paint per square foot.
- Vinyl siding: 300-350 sq ft per gallon (use vinyl-safe paint)
- Wood lap siding: 200-275 sq ft (two coats minimum)
- Hardiboard cement siding: 275-325 sq ft
- Stucco: 125-200 sq ft
- Brick: 100-175 sq ft (use masonry primer first)
A 2,000 sq ft exterior with lap siding typically needs 10 to 14 gallons for two coats including trim. Always buy 10 percent extra for touch-ups over the project’s life.
Buying Tips That Save Money
- Buy in 5-gallon buckets when you need more than 3 gallons. Saves $5 to $8 per gallon
- Mix multiple gallons together (boxing) before starting to avoid color shift between cans
- Ask the paint desk to tint primer to 25 percent of your topcoat color
- Buy one quality brand instead of two cheap brands. A $55 Benjamin Moore Regal covers in two coats what a $30 big-box paint needs three coats to match
- Always save the leftover quart for touch-ups. Label with room, date, and tint formula
Common Mistakes That Waste Paint
Loading the roller too heavy causes drips, splatter, and uneven thickness that needs sanding. Load lightly and reload often. Painting in direct sun or above 90°F causes flash-drying that leaves lap marks and forces you to apply more paint. Work in shade on exteriors. Dumping paint from the tray back into the can contaminates the full gallon with dust and dried skin. Strain or start fresh.
How Far a Quart of Exterior Paint Goes
A quart is one quarter of a gallon, so a quart of exterior paint covers roughly a quarter of the gallon figure for the same surface. On vinyl siding that works out to about 75 to 90 square feet per coat, and on wood lap siding closer to 50 to 70 square feet. That is enough for a front door, a set of shutters, or trim touch-ups, but rarely for a whole wall.
| Exterior surface | Per gallon, one coat | Per quart, one coat |
|---|---|---|
| Vinyl siding | 300 to 350 sq ft | 75 to 90 sq ft |
| Wood lap siding | 200 to 275 sq ft | 50 to 70 sq ft |
| Fiber cement siding | 275 to 325 sq ft | 70 to 80 sq ft |
| Stucco | 125 to 200 sq ft | 30 to 50 sq ft |
| Brick, primed | 100 to 175 sq ft | 25 to 45 sq ft |
Small Exterior Jobs a Quart Handles
- Entry door: one side of a standard door is about 20 square feet, so a quart covers two coats on the outside face plus the edges, with some left over.
- Shutters: a pair of louvered shutters soaks up more paint than flat panels; plan on a quart for two or three pairs at two coats.
- Window trim and sills: a quart typically covers trim on several average windows for one coat.
- Mailbox post, railings, or a garage service door: one quart is usually enough.
When a Quart Makes Sense and When It Does Not
Quarts cost noticeably more per ounce than gallons. Once a job needs more than two quarts, a gallon is usually the cheaper buy and leaves a reserve for touch-ups. Quarts shine for accent colors, testing a color on the actual siding before ordering gallons, and keeping a labeled touch-up supply.
Not every exterior line is sold in quarts, and deep or custom colors may only come in gallons, so check availability before planning a small job around one. If you test with a quart, paint a patch at least 2 feet square on the sunny and shaded sides of the house, and judge it dry at different times of day. Exterior colors look lighter in full sun than on a chip.
Work in shade and avoid painting when it is hotter than 90°F, since fast drying on a hot door or shutter leaves lap marks and costs an extra coat, which is the quickest way to run out of a quart halfway through.