Few exterior changes deliver as dramatic a curb-appeal jump as covering tired, painted, or mismatched brick with fresh siding. The siding over brick before and after difference can take a home from dated and patchy to clean and modern in a single project, but the transformation only lasts if the wall behind it is built to breathe and stay dry. Done correctly, with furring strips, proper insulation, and the right siding material, the upgrade looks great and performs for decades. Done carelessly, it traps moisture against the brick and invites rot.
- Why Homeowners Cover Brick
- The Critical Step: You Cannot Side Directly Onto Brick
- Building the Wall Assembly Correctly
- Choosing the Siding Material
- The Moisture Question, Answered Honestly
- Pros and Cons at a Glance
- What to Expect for Cost and Timeline
- Should You DIY or Hire It Out?
- Alternatives Worth Considering First
- Maintaining Your New Siding
Why Homeowners Cover Brick
Brick is durable, but it does not suit every home or owner. People side over it for several practical reasons.
- Outdated appearance: Orange or multi-tone brick from past decades can clash with a modern aesthetic.
- Painted brick gone wrong: Once painted, brick is hard to reverse, and peeling paint looks worse over time.
- Mismatched additions: Older brick rarely matches new brick, leaving obvious seams.
- Energy efficiency: Older brick walls often lack insulation, and re-siding is a chance to add it.
- Low maintenance goals: Tuckpointing aging mortar is costly; new siding can reduce upkeep.
The Critical Step: You Cannot Side Directly Onto Brick
This is the detail that separates a lasting result from a disaster. Siding should never be fastened flat against brick. Brick is uneven, and pinning siding tight to it traps any moisture that gets behind the cladding, which can lead to mold, rot in framing, and deteriorating mortar. Instead, contractors install vertical furring strips, typically 1×3 or 1×4 wood or composite battens, anchored into the brick. These create a level nailing surface and, just as importantly, an air gap that lets the wall drain and dry.
Building the Wall Assembly Correctly
A proper siding-over-brick assembly is built in layers, each with a job.
- Inspect and repair the brick. Fix major cracks, address any active water intrusion, and ensure mortar is sound before covering it.
- Install furring strips vertically, shimmed as needed to create a flat plane and the all-important drainage gap.
- Add rigid foam insulation between or over the strips if you want to boost the wall’s R-value, a common reason to do this project at all.
- Apply a weather-resistive barrier such as house wrap to manage any moisture that gets past the siding.
- Flash all windows, doors, and penetrations carefully, since brick walls often have deep reveals that need extension.
- Install the siding over the furring, leaving the manufacturer-specified gaps for expansion.
Choosing the Siding Material
The two most common choices over brick are vinyl and fiber cement, and they suit different priorities.
Vinyl Siding
Vinyl is the budget-friendly, lightweight option, often running a lower installed cost per square foot than fiber cement. It never needs painting, resists moisture, and installs relatively quickly. The tradeoffs are a less substantial look and lower impact resistance, though modern insulated vinyl has narrowed the gap considerably.
Fiber Cement Siding
Fiber cement, such as the well-known Hardie-style boards, offers a premium, wood-like appearance, excellent durability, and strong fire and impact resistance. It costs more and is heavier, requiring more labor and proper fastening. For homeowners who want the most upscale before-and-after result, fiber cement is usually the choice.
The Moisture Question, Answered Honestly
The single biggest risk in this project is moisture, so it deserves a straight answer. Brick is porous and naturally manages water by absorbing and releasing it. Cover it without a drainage gap and a weather barrier, and you can trap water against the brick and framing, causing the very rot and mold the new siding was supposed to prevent. This is why the furring-strip air gap and proper flashing are non-negotiable. When the assembly is built to drain and dry, siding over brick is durable. When it is slapped on flat, problems can show up within a few years and stay hidden until they are expensive.
Pros and Cons at a Glance
- Pros: Dramatic curb-appeal improvement, a chance to add insulation, fresh modern look, color flexibility, and reduced ongoing brick maintenance.
- Cons: Significant cost, moisture risk if done wrong, added wall thickness that affects trim and rooflines, and the permanent loss of original brick character.
What to Expect for Cost and Timeline
Pricing varies widely by region, home size, material, and how much insulation and prep the brick needs, so get multiple itemized bids rather than trusting a single per-square-foot figure. Expect fiber cement to cost meaningfully more than vinyl, and budget extra for furring, insulation, flashing, and trim extensions, which are easy to underestimate. A typical home might take one to two weeks depending on size and weather. Permits are commonly required, so confirm local code before work begins.
Should You DIY or Hire It Out?
Anchoring furring into brick, getting a flat plane, and flashing deep brick reveals correctly are demanding tasks where mistakes invite water damage. A confident DIYer might tackle a small, simple wall, but for a whole house, hiring an experienced siding contractor is the safer path. Ask specifically how they handle the air gap, insulation, and flashing; the quality of those hidden details determines whether your before-and-after still looks good in ten years.
Alternatives Worth Considering First
Before committing to siding, weigh the alternatives, because covering brick is permanent and significant. Painting or limewashing the brick can dramatically update the look for far less money, though paint requires occasional maintenance and cannot easily be reversed. German smear or a mortar wash softens dated brick with a textured, whitewashed effect. Professional cleaning and tuckpointing can restore brick that simply looks tired rather than dated. Stone or brick veneer is another option if you like masonry but want a different style. Comparing these against full re-siding helps ensure you are spending on the result you truly want.
Maintaining Your New Siding
Once the project is done, a little upkeep keeps the before-and-after looking sharp for the long haul. Vinyl siding needs occasional washing with a soft brush and mild soap to remove dirt and mildew. Fiber cement should be inspected periodically for caulk gaps and repainted roughly every 10 to 15 years depending on the product and exposure. Keep gutters clear and downspouts directed away from the wall so water never backs up behind the siding. Trim back vegetation that traps moisture against the cladding. Catching small caulk or flashing issues early prevents the moisture problems that undermine the whole installation.
The siding over brick before and after payoff is real, turning an outdated exterior into a clean, contemporary one while adding insulation along the way. Just remember the result lives and dies by the wall assembly underneath. Build in the drainage gap, insulate, flash carefully, and choose quality siding, and you will get a transformation that performs as well as it looks.