Home Improvement

Types of Drills: Complete Guide for Homeowners

Types of Drills: Complete Guide for Homeowners

Walk into any hardware store and you will find an entire aisle of drills that look similar but serve very different purposes. Using a standard drill/driver when you need a hammer drill means burning out the motor on a concrete job. Grabbing an impact driver when you need precision boring creates oversized, sloppy holes. Understanding the different types of drills ensures you buy the right tool for the work at hand and avoid damaging materials, bits, and your patience.

Cordless Drill/Driver

The cordless drill/driver is the single most versatile power tool in any household toolkit. It drills holes in wood, metal, and plastic, and drives screws with an adjustable clutch that prevents overdriving. Modern brushless models deliver 500-700 inch-pounds of torque, enough for virtually any residential drilling or fastening task.

Cordless drills run on lithium-ion battery packs, with 12V compact models weighing 2-3 lbs and 20V full-size models weighing 3.5-5 lbs. Battery capacity (measured in amp-hours) determines run time: a 2.0 Ah battery handles 100-200 screws per charge, while a 5.0 Ah pack doubles that. Expect to pay $60-$150 for a quality cordless drill/driver kit with two batteries and a charger.

Top picks for homeowners include the DeWalt DCD771C2 ($99), Milwaukee M12 Fuel ($120), and Makita XFD131 ($130). For occasional use, the Ryobi P215K ($60) delivers solid performance at the lowest price point.

Impact Driver

Impact drivers look similar to drill/drivers but operate differently. Instead of continuous rotation, they deliver rapid rotational impacts (up to 3,600 per minute) that generate far more torque, typically 1,500-2,000 inch-pounds, without transferring that force to your wrist. This makes them ideal for driving long screws, lag bolts, and structural fasteners that would stall a standard drill.

Impact drivers use hex-shank bits only (no standard drill chucks), which limits their use as precision drilling tools. They excel at deck building, framing, furniture assembly, and any project involving dozens or hundreds of screws. Prices range from $70-$200, and most professionals and serious DIYers own both a drill/driver and an impact driver, using each for its intended purpose.

Hammer Drill

Hammer drills add a percussive action to standard rotation, pounding the bit forward while it spins. This hammering action is essential for drilling into concrete, brick, block, and stone, materials that would quickly burn out a standard drill motor. Residential hammer drills deliver 30,000-50,000 impacts per minute with up to 2-3 joules of impact energy.

Most cordless hammer drills are combination tools that function as standard drill/drivers with a switchable hammer mode. The DeWalt DCD996 ($170-$200) and Milwaukee 2804-20 ($150-$180) are excellent 20V cordless hammer drills that handle up to 1/2-inch holes in concrete. For occasional concrete drilling (anchoring shelves, mounting TV brackets), a cordless hammer drill is sufficient. For extensive masonry work, you need a rotary hammer.

Rotary Hammer (SDS Drill)

Rotary hammers use an electro-pneumatic mechanism that delivers significantly more impact energy than a standard hammer drill, typically 2-8 joules. They use SDS-Plus or SDS-Max bit systems that lock in without a chuck, allowing the bit to move independently for maximum impact transfer. This makes them dramatically more effective in concrete and masonry.

Rotary hammers drill 1/4-inch to 1-1/2-inch holes in concrete quickly and with less effort than hammer drills. Many models include a chisel-only mode for light demolition work like removing tile, breaking up small concrete sections, or chipping mortar. Corded rotary hammers cost $150-$400; cordless models from DeWalt, Milwaukee, and Bosch run $200-$500. Rent one for $50-$75 per day if you only need it for a single project.

Looking to buy Types of Drills? Compare top-rated options.
Shop on Amazon →Browse Our Shop
As an Amazon Associate we earn from qualifying purchases.

Drill Press

A drill press is a stationary tool that delivers perfectly straight, precisely positioned holes that freehand drilling cannot match. The workpiece sits on an adjustable table, and the drill spindle descends on a lever-operated quill with depth control. Speeds are adjustable from 250-3,000+ RPM to match different materials and bit sizes.

Benchtop drill presses ($100-$300) handle most homeowner and hobbyist needs. Floor-standing models ($300-$800) offer more power, larger tables, and greater drilling depth for serious woodworkers. A drill press is essential for repetitive drilling (like shelf pin holes), angled holes using the tilting table, and any project where hole accuracy matters.

Right Angle Drill

Right angle drills position the chuck at 90 degrees to the motor body, allowing you to drill and drive in tight spaces where a standard drill cannot fit. Plumbers and electricians use them constantly to bore through studs and joists inside wall and floor cavities. The compact head fits between studs spaced at 16 inches on center.

Cordless right angle drills cost $100-$200 for the bare tool. The Milwaukee M18 Fuel Right Angle Drill ($180) and DeWalt DCD740B ($130) are popular professional choices. Homeowners rarely need a dedicated right angle drill, but renting one for a specific project like running electrical wire through existing walls saves enormous time and frustration.

Specialty Drill Types

  • Magnetic drill press (mag drill): Clamps magnetically to steel beams and structures for precision drilling in steel fabrication. Industrial tool priced at $400-$2,000. Rarely needed for residential work.
  • Mixing drill: Low-speed, high-torque drill designed for stirring paint, thinset, grout, and concrete. Standard drills lack the torque and low-speed control needed for mixing heavy materials without burning out. $80-$200.
  • Screwdriver (power): Lightweight, low-torque tool designed specifically for driving small screws in electronics, cabinetry, and light assembly. Not a drill. $30-$80.
  • Core drill: Uses hollow diamond-tipped bits to cut precise cylindrical holes in concrete, stone, and masonry for plumbing, HVAC, and electrical penetrations. Professional tool priced at $300-$1,000. Rent for $75-$150 per day.

Choosing the Right Drill for Your Needs

Most homeowners need just two of these types of drills: a cordless drill/driver for everyday tasks and either a hammer drill or impact driver depending on whether they work more with masonry or heavy fastening. If you are building a deck or doing framing, the impact driver is essential. If you are mounting into concrete or brick, the hammer drill is the right call.

Buying into one battery platform (DeWalt 20V MAX, Milwaukee M18, Makita 18V LXT, or Ryobi 18V ONE+) lets you share batteries across multiple tools as your collection grows. This platform approach saves money and storage space compared to buying standalone tools with separate chargers and batteries. Start with the drill/driver kit, then add specialty types of drills as your projects demand them.