Tile Flooring

Brick Tile Shower: Layouts, Grout, and Waterproofing

Brick Tile Shower: Layouts, Grout, and Waterproofing

Real clay brick and constant shower water are a tricky match, which is why most successful designs rely on porcelain that only looks like brick. A brick tile shower can be built with glazed brick-look porcelain or ceramic, which is fully shower-safe, or with sealed thin brick veneer, which works on walls when the waterproofing behind it is done right and the sealing schedule is kept. Unsealed reclaimed brick slices are the option to skip inside the spray zone.

From there, the design comes down to three decisions: the layout pattern, the grout color, and how you protect the wall system behind the tile. Get the waterproof membrane right first, because no brick or grout stops water on its own. Tile and grout are a finish layer, not a barrier.

Here is how to choose the material, plan the pattern, pick grout and seal everything so the wall stays dry and mold free.

Which Brick Tiles Are Safe for a Brick Tile Shower

Not every product sold as brick tile belongs in a shower. Absorption rate is the number that matters most. Porcelain absorbs 0.5 percent or less of its weight in water, while clay thin brick can absorb several percent or more, which invites efflorescence, staining and mildew if it is left unsealed.

Material Shower walls Shower floor Sealing
Brick-look porcelain Yes Yes, if slip rated Grout only
Glazed ceramic brick-look Yes Rarely Grout only
Glazed thin brick Yes Not advised Grout and edges
Unglazed thin brick Possible, sealed Not advised Full surface, ongoing
Reclaimed brick slices Not advised No Heavy, ongoing

Brick-look porcelain

Printed porcelain recreates the texture, color shifts and tumbled edges of old brick with almost no water absorption. It is the lowest-maintenance route and the only option most installers recommend for shower floors, where you need a textured, slip-resistant surface rated for wet areas.

Glazed ceramic and glazed brick

Glossy glazed brick tiles in white, green or deep blue have become a popular modern take. The glaze sheds water, but the edges and back are still porous, so the grout joints and any cut edges deserve attention.

Unglazed thin brick

Real thin brick, about half an inch thick, delivers authentic texture. It can work on shower walls outside the direct spray or in steam-free bathrooms when sealed with a penetrating masonry sealer and resealed regularly. Expect more upkeep and some color darkening when wet.

For brick tiles in bathroom areas beyond the shower, such as an accent wall behind a vanity, any of these materials work because water exposure is occasional rather than daily.

Waterproofing Behind the Brick

Every brick tile shower needs a continuous waterproof layer behind the tile. Common approaches include a liquid-applied membrane painted over cement board, a sheet membrane bonded with thin-set, or a foam board system with sealed seams. Run the membrane from the shower pan or tray up to at least the showerhead height, and many pros take it to the ceiling in steam showers.

  • Seal all seams, corners and screw penetrations with the system’s tape or banding.
  • Waterproof niches and benches completely, including the top of the bench, which should slope toward the drain.
  • Flood test the shower pan for 24 hours before tiling the floor.
  • Use a vapor approach that matches your membrane; do not stack a plastic vapor barrier behind a surface-applied membrane, which can trap moisture in the wall.

Running Bond vs Herringbone and Other Layouts

Brick shapes, usually around 2 by 8 or 2.5 by 10 inches, offer more layout options than most tiles. The pattern changes both the look and the installation time.

Running bond

The classic half-offset brick pattern reads as traditional and is the fastest to install. With long porcelain planks, many makers recommend a third offset instead of a half offset to reduce lippage from slight bowing. Horizontal running bond widens a narrow shower visually.

Stacked bond

Laying bricks in straight vertical or horizontal stacks gives a clean, modern grid. It shows any out-of-plumb walls clearly, so check your walls with a level before committing.

Herringbone

Herringbone adds movement and a custom feel, and it works beautifully as a feature wall or shower floor. It takes more cuts, more time and roughly 10 to 15 percent extra tile for waste, compared with about 10 percent for running bond.

Basketweave and vertical stack

Basketweave suits small floors and shower niches. A vertical stack draws the eye upward and makes a low ceiling feel taller.

Plan the layout so cuts land in the inside corners and the least visible wall. A full row at the top of a niche and at the shower curb looks far more finished than a sliver.

Grout Color and Type

Grout makes or breaks the brick look. Light gray or off-white grout mimics traditional mortar and highlights the pattern. Charcoal grout softens the pattern and hides soap scum better. Matching grout to the tile gives a quieter, more monolithic wall.

  • Joint width: Brick-look porcelain typically uses 1/8 to 3/16 inch joints. Thin brick often uses wider 3/8 to 1/2 inch joints for a true mortar look.
  • Grout type: Epoxy or single-component premixed grout resists mildew stains in showers and needs no sealing. Cement grout must be sealed and resealed.
  • Change of plane: Use flexible silicone caulk, not grout, at inside corners and where walls meet the floor or tub. Grout cracks at these joints as the structure moves.

Tools and Materials

  • Brick-look tile or thin brick plus 10 to 15 percent overage
  • Waterproofing membrane system and cement board or foam board
  • Polymer-modified thin-set rated for your tile size and membrane
  • Wet tile saw with a blade suited to porcelain or brick
  • Notched trowels, level, laser or chalk line, and tile spacers
  • Grout, float, sponges and buckets
  • Penetrating masonry sealer for thin brick and cement grout
  • Silicone caulk for corners and changes of plane
  • N95 or P100 respirator, safety glasses, hearing protection and gloves
Need help with your flooring project? Get a free quote by phone.
📞 Call (877) 465-0151
Free, no-obligation quote · Connect with a local pro

Installation Steps

  1. Prepare and waterproof. Install backer board or foam board, apply the membrane per the system directions, and let it cure fully.
  2. Lay out the pattern. Snap a level reference line one tile row up from the pan or tub. Dry-lay a few rows to confirm offset and cut locations.
  3. Pre-seal thin brick. If using unglazed thin brick, apply a penetrating sealer to the faces before setting, which keeps grout from staining the brick.
  4. Set the tile. Back-butter each piece and press into thin-set, aiming for full coverage. Wet areas call for at least 95 percent mortar contact.
  5. Cut with water. Make cuts on a wet tile saw so the blade stays cool and dust stays down.
  6. Let the thin-set cure for at least 24 hours before grouting.
  7. Grout and tool. For thin brick with wide joints, many installers use a grout bag to fill joints without smearing the textured face, then tool with a jointer.
  8. Caulk and seal. Caulk corners, then seal cement grout and thin brick after the cure time listed on the products.

Silica Dust and Mold Safety

Cutting brick, porcelain and backer board releases crystalline silica dust, which can damage lungs over time. Use wet cutting and wet drilling whenever possible, wear an N95 or P100 respirator, and clean up with a HEPA vacuum rather than dry sweeping. Cut outdoors or in a garage with the door open when you can.

Moisture is the root of shower mold. Fix any leak or soft wall before tiling, waterproof the full wet area, and run the exhaust fan during and for 20 to 30 minutes after each shower. If you find mold larger than about 10 square feet during demolition, bring in a mold remediation professional.

Troubleshooting and Maintenance

White powder on thin brick: Efflorescence is salt carried out by moisture. Clean with a mild efflorescence cleaner, let the brick dry, and reseal. Persistent efflorescence points to water getting behind the tile.

Dark spots in grout: Mildew usually means poor ventilation or worn sealer. Clean with a mildew remover, let dry, and reseal cement grout.

Lippage on long tiles: Uneven edges come from tile bow or a half offset. Use a leveling clip system and a third offset.

Reseal thin brick and cement grout every 6 to 12 months in a daily-use shower. A quick water drop test tells you when: if water darkens the surface within a minute, it is time.

Cost Ranges and When to Call a Pro

Brick-look porcelain often runs roughly $4 to $12 per square foot for material, while real thin brick can range higher. Professional installation for a full brick tile shower, including waterproofing, commonly lands in the low to mid thousands of dollars for a standard alcove, and herringbone layouts or niches add labor. Call a licensed contractor for plumbing changes, a new drain location or any structural repair, and hire an experienced tile setter if you are uncertain about waterproofing.

Frequently Asked Questions

Can you use real brick in a shower?

Real thin brick can work on shower walls if it is sealed and resealed regularly over a proper waterproof membrane. Brick-look porcelain is a lower-maintenance choice for daily showers.

What is the best layout for a brick tile shower?

Running bond is the most traditional and fastest to install. Herringbone makes a striking feature wall or floor but takes more time and extra tile for waste.

What grout color looks best with brick tile?

Light gray or off-white grout creates a classic mortar look. Charcoal grout softens the pattern and hides soap scum, while matching grout gives a calm, modern finish.

Do brick tiles in a bathroom need sealing?

Porcelain brick-look tile does not, though cement grout does. Unglazed thin brick needs a penetrating masonry sealer, especially in showers and around sinks.

Can brick tile go on a shower floor?

Use slip-rated brick-look porcelain for shower floors. Real thin brick is too porous and uneven for a floor that stays wet every day.

Prefer to explore on your own?

See how new flooring looks in your actual room in seconds — free, no signup.

Try the free Floor Studio →